Downloads
Technical Documentation
- REX 100 Ethernet Router700-875-WAN01REX 100 WAN, 3 x LAN (switch)/1 x WAN interface
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 WAN | WiFi 2 4 MB EG Declaration of Confirmity 05-2016 37 KB EG Declaration of Confirmity - REX 100 Ethernet Router700-875-UMT01REX 100 3G, 4 x LAN (switch)/1 x 3G modem (UMTS)
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 3G | LTE 2 4 MB EG Declaration of Confirmity 11-2018 99 KB EG Declaration of Confirmity - REX 100 Ethernet Router700-875-LTE01REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (EU- & Asia-Version)
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 3G | LTE 2 4 MB EU Declaration of Confirmity 05-2019 56 KB EU Declaration of Confirmity - REX 100 Ethernet Router700-875-WIF01REX 100 WiFi, 4 x LAN (switch)/1 x WiFi interface
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 WAN | WiFi 2 4 MB EU Declaration of Conformity 05-2021 46 KB EU Declaration of Conformity, REX 100 WiFi - REX 300, Ethernet Router700-872-MDM02REX 300 WAN+analog Modem, PROFIBUS/MPI, serial interface
- REX 300, Ethernet Router700-873-WAN02REX 300, WAN, PROFIBUS/MPI, serial port
- REX 300, Ethernet Router700-874-UMT02REX 300 eco UMTS
- SSW7-TS700-751-8VK21MPI Adapter with teleservice function
SSW7-TS, Manual 3 420 KB - SSW7-TS PRO700-770-8MD41MPI/PROFIBUS adapter with Modem analog
- GSM/UMTS/LTE Antennas for REX 100/200/250700-751-ANT31Stationary quadband antenna, GSM/UMTS/LTE, 2 dBi, incl. 5 m cable, SMA male connector
- GSM/UMTS/LTE Antennas for REX 100/200/250700-751-ANT33Magnetic base antenna, GSM/UMTS/LTE, 2dBi, incl. 3 m cable, SMA male connector
- GSM/UMTS/LTE Antennas for REX 100/200/250700-751-ANT35MiMo wall antenna, GSM/UMTS/LTE, 4 dBi, incl. 2x 5 m cable, SMA male connectors
- WiFi Antennas for REX 100/200/250700-889-ANT01Magnetic base antenna, 5dBi , incl. 1.5 m cable, RP-SMA male connector
- WiFi Antennas for REX 100/200/250700-889-ANT03Panel antenna, 8 dBi (antenna cable required)
Panel antenna, 8 dBi, Data Sheet 1 296 KB - WiFi Antennas for REX 100/200/250700-889-ANT04Panel antenna, 18 dBi (antenna cable required)
- GSM/UMTS Antennas for REX 300700-751-ANT12Magnetic base quadband antenna, GSM/UMTS, 2 dBi, 2.5 m cable, FME female connector
- WALL IE700-860-WAL01WALL IE – Industrial NAT Gateway/Firewall
WALL IE / WALL IE PLUS, Quick Start Guide 15 2 MB WALLIE, Wall IE, Wallie, WALL IE Plus, WALLIE PLUS WALL IE / WALL IE PLUS, Manual 10 3 MB WALLIE, Wall IE, Wallie, WALL IE Plus, WALLIE PLUS EG Declaration of Confirmity 03-2019 86 KB EG Declaration of Confirmity - PROFINET-Switch700-850-4PS014-port, managed
PROFINET-Switch, FAQ 2 180 KB PROFINET-Switch 4/8/16-Port, Quick Start Guide 10 2 MB PROFINET-Switch 4/8/16-port, Manual 1 2 MB PROFINET-Switch 4/8/16-port, Manual PROFINET-Switch 4/8/16-port, Manual – as of firmware V1.10 4 6 MB PROFINET-Switch 4/8/16-port, Manual EG Declaration of Conformity 11-2021 89 KB EG Declaration of Conformity Advantages of a PROFINET-Switch 4 2 MB Advantages of a PROFINET-Switch PROFINET-Switch 4-port, PROFINET-Certificate 108 KB PROFINET-Switch 4-port, PROFINET-Certificate - PROFINET-Switch700-850-8PS018-port, managed
PROFINET-Switch, FAQ 2 180 KB PROFINET-Switch 4/8/16-Port, Quick Start Guide 10 2 MB PROFINET-Switch 4/8/16-port, Manual 1 2 MB PROFINET-Switch 4/8/16-port, Manual PROFINET-Switch 4/8/16-port, Manual – as of firmware V1.10 4 6 MB PROFINET-Switch 4/8/16-port, Manual EG Declaration of Conformity 11-2021 89 KB EG Declaration of Conformity Advantages of a PROFINET-Switch 4 2 MB Advantages of a PROFINET-Switch PROFINET-Switch 8-port, PROFINET-Certificate 108 KB PROFINET-Switch 8-port, PROFINET-Certificate - TB20-C, bus coupler600-180-1AA11PROFINET IO
TB20, Manual PROFINET Coupler 4 8 MB TB20, Manual PROFINET Coupler EU Declaration of Confirmity 04-2020 55 KB EU Declaration of Confirmity - TB20-C, Bus coupler600-151-1AA11PROFIBUS-DP
TB20, Manual PROFIBUS-DP Bus Coupler 5 10 MB EU Declaration of Confirmity 04-2020 55 KB EU Declaration of Confirmity - TB20-C, bus coupler600-160-1AA11CANopen Slave
TB20, Manual CANopen Bus Coupler 6 6 MB TB20, Manual CANopen Bus Coupler EU Declaration of Confirmity 04-2020 55 KB EU Declaration of Confirmity - TB20-C, Bus coupler600-170-1AA11ModbusTCP
TB20 – ModbusTCP Koppler, Manual 3 7 MB EU Declaration of Confirmity 04-2020 55 KB EU Declaration of Confirmity - TB20-C, bus coupler600-175-1AA11EtherNet/IP
TB20, Manual EtherNet/IP Bus Coupler 3 9 MB TB20, Manual EtherNet/IP Bus Coupler EU Declaration of Confirmity 04-2020 55 KB EU Declaration of Confirmity - TB20-C, bus coupler600-165-1AA11DeviceNet Slave
TB20, Manual DeviceNet Bus Couppler 2 8 MB EU Declaration of Confirmity 04-2020 55 KB EU Declaration of Confirmity - DI, DC 24 V600-210-0AB01DI 2x DC 24 V
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, DC 24 V600-210-0AD01DI 4x DC 24 V
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, DC 24 V600-210-0AH01DI 8x DC 24 V
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, DC 24 V600-210-0AP21DI 16x DC 24 V
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, DC 24 V, 3-wire600-210-0CC01DI 3x DC 24 V, 3-wire
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, DC 24 V, 3-wire600-210-0CF21DI 6x DC 24 V, 3-wire
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, AC 230 V, per channel N, Type 1600-211-0BB01DI 2x AC 230 V, per channel N, Type 1
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, AC 230 V, per channel N, Type 1600-211-0BD01DI 4x AC 230 V, per channel N, Type 1
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, AC 230 V, per channel N, Type 1600-211-0BH21DI 8x AC 230 V, per channel N, Type 1
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 500 mA600-220-0AD01DO 4x DC 24 V, 500 mA
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 500 mA600-220-0AH01DO 8x DC 24 V, 500 mA
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 500 mA600-220-0AP21DO 16x DC 24 V, 500 mA
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 700 mA, Highfeature600-220-7AD01DO 4x DC 24 V, 700 mA, Highfeature
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 700 mA, Highfeature600-220-7AH01DO 8 x DC 24 V, 700 mA, Highfeature
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 700 mA, Highfeature600-220-7AP21DO 16 x DC 24 V, 700 mA, Highfeature
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 2 A600-220-0BB01DO 2x DC 24 V, 2 A
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, DC 24 V, 2 A600-220-0BD01DO 4x DC 24 V, 2 A
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, Relais600-222-0AB01DO 2x relays, 5 A, AC 230 V, changeover
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DO, Relais600-222-0AD21DO 4x relays, 5 A, AC 230 V, changeover
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DIO, DC 24 V, 500 mA600-230-0AD01DIO 2x In/2x Out DC 24 V, 500 mA
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DIO, DC 24 V, 500 mA600-230-0AH01DIO 4x In/4x Out DC 24 V, 500 mA
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DIO, DC 24 V, 500 mA600-230-0AP21DIO 8x In/8x Out DC 24 V, 500 mA
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 12 Bit, I600-250-4AB01AI 2x I, 0/4-20 mA, ±20 mA, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 12 Bit, I600-250-4AD01AI 4x I, 0/4-20 mA, ±20 mA, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, I600-250-7BB01AI 2 x I, 0/4-20 mA, ±20 mA, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, I600-250-7BD01AI 4 x I, 0/4-20 mA, ±20 mA, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, I600-250-7BH21AI 8 x I, 0/4-20 mA, ±20 mA, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 12 Bit, U, ±10V600-252-4AB01AI 2x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 12 Bit, U, ±10V600-252-4AD01AI 4x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, U, ±10V600-252-7BB01AI 2x U, ±10 V, 0-10 V, 1-5 V, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, U, ±10V600-252-7BD01AI 4x U, ±10 V, 0-10 V, 1-5 V, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, U, ±10V600-252-7BH21AI 8x U, ±10 V, 0-10 V, 1-5 V, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 12 Bit, U, ±24V600-252-4CB01AI 2x U, ±24 V, 0-24 V, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 12 Bit, U, ±24V600-252-4CD01AI 4x U, ±24 V, 0-24 V, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, R, RTD, 16 bit600-253-4BH21AI 8 x R, RTD, 16 Bit, 2 wire
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, R, RTD, 16 bit600-253-4AD01AI 2/4x R, RTD, 16 Bit, 2/3/4 wire
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, TC, Iso.600-254-4AD02AI 4x TC, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AI, 16 Bit, TC, Iso.600-254-4AH22AI 8x TC, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AO, 12 Bit, U600-261-4AB01AO 2 x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AO, 12 Bit, U600-261-4AD01AO 4 x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AO, 12 Bit, I600-260-4AB01AO 2x I, 0/4-20 mA, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - AO, 12 Bit, I600-260-4AD01AO 4x I, 0/4-20 mA, 12 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Strain gauge weighing module600-256-7AA01Strain gauge weighing module
- Counter600-300-7AA011x Counter 24 V, 500 kHz, 32 Bit
TB20, Manual Counter 24 V 3 8 MB - Counter600-310-7AA011x Counter 5 V (RS422), 4 MHz, 32 Bit
TB20, Manual Counter 5 V 2 7 MB - Counter600-300-1AB012x Counter Economy 24 V, 1 kHz, 32 bit
- Counter600-300-1AD014x Counter Economy 24 V, 1 kHz, 32 Bit
- SSI encoder interface600-320-7AA011 x SSI encoder interface
- Energy Meter600-255-7AA21Energy Meter, 1 A
TB20, Manual Energy Meter 1 4 MB - Energy Meter600-255-7BA21Energy Meter, 5 A
TB20, Manual Energy Meter 1 4 MB - Power and isolation module, DC 24 V, 8 A600-710-0AA01Power and isolation module, DC 24 V, 8 A
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Potential distributors600-720-0AH01Potential distributor 9x DC 24 V
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Potential distributors600-720-0BH01Potential distributor 9x GND
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Potential distributors600-720-0CH01Potential distributor 10x AUX
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Potential distributors600-720-0DH01Potential distributor 4x DC 24 V + 4x GND
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Potential distributors600-720-0XH01Potential distributor 9x free
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Potential distributors600-730-4AD01Potential distributor 4x DC 24 V, Highfeature, short-circuit protection, with alarms
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Power module DC 24 V600-700-0AA01Power module DC 24 V
TB20, Manual Modules 15 8 MB TB20, Manual Modules - PROFINET connector, RJ45, EasyConnect®700-901-1BB2090°
PROFINET Connector 90°, Brief instruction 3 360 KB PROFINET Connector 90°, Brief instruction EG Declaration of Confirmity 07-2018 35 KB EG Declaration of Confirmity - PROFINET connector, RJ45, EasyConnect®700-901-1BB10180°
PROFINET Connector 180°, Brief instruction 3 317 KB PROFINET Connector 180°, Brief instruction EG Declaration of Confirmity 07-2018 35 KB EG Declaration of Confirmity PROFINET connector, 180°, 3D file 210 KB PROFINET connector, 180°, 3D file - PN/CAN-Gateway700-672-PNC01PROFINET/CANopen Slave
EG Declaration of Confirmity 06-2019 78 KB EG-Konformitätserklärung PN/CAN-Gateway CANopen Slave, Manual 2 1 MB PN/CAN-Gateway CANopen Slave, Manual - PN/CAN-Gateway700-671-PNC01PROFINET/CAN Layer 2
EG Declaration of Confirmity 06-2019 78 KB EG-Konformitätserklärung PN/CAN-Gateway CAN Layer 2, Quick Start Guide 3 721 KB PN/CAN-Gateway CAN Layer 2, Manual 2 940 KB - PROFIBUS connector, 90° screw terminal700-972-0BA12without PG
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connector, 90° screw terminal700-972-0BB12with PG
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connector, 90° screw terminal, diagnostics LED700-972-7BA12without PG
EG Declaration of Confirmity 04-2016 56 KB EG Declaration of Confirmity - PROFIBUS connector, 90° screw terminal, diagnostics LED700-972-7BB12with PG
EG Declaration of Confirmity 04-2016 56 KB EG Declaration of Confirmity - PROFIBUS connector, 35°, screw terminal700-972-0BA41without PG
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connector, 35°, screw terminal700-972-0BB41with PG
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connector, axial, screw terminal700-972-0CA12PROFIBUS connector, axial, screw terminal
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connector, 90° EasyConnect®700-972-0BA50without PG
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connector, 90° EasyConnect®700-972-0BB50with PG
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connector, angled, EasyConnect®700-972-0BA51without PG
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - PROFIBUS connectors, axial, EasyConnect®700-972-0CA50PROFIBUS connector, axial, EasyConnect®
EG Declaration of Confirmity 10-2018 64 KB EG Declaration of Confirmity - FLEXtra® twinRepeater700-972-2AA02FLEXtra® twinRepeater
FLEXtra® twinRepeater, Brief Instruction 3 2 MB EG Declaration of Confirmity 04-2016 37 KB EG Declaration of Confirmity - FLEXtra® twinRepeater700-972-2XA02Set, incl. 2 x PROFIBUS connectors, 90°, screw terminal with PG
- FLEXtra® multiRepeater700-972-4AA024-way
FLEXtra multiRepeater, Brief Instruction 4 2 MB FLEXtra multiRepeater, Brief Instruction EU Declaration of Confirmity 07-2019 149 KB EU Declaration of Confirmity - FLEXtra® multiRepeater700-972-6AA026-way
FLEXtra multiRepeater, Brief Instruction 4 2 MB FLEXtra multiRepeater, Brief Instruction EU Declaration of Confirmity 06-2019 79 KB EU Declaration of Confirmity - PROFIBUS compact repeater700-972-0RB12PROFIBUS compact repeater
EG Declaration of Confirmity 04-2016 36 KB EG Declaration of Confirmity Compact Repeater, Brief Instruction 4 359 KB Compact Repeater, Brief Instruction - NETLink PRO700-884-MPI21NETLink PRO Compact
NETLink Ethernet Gateways, Quick Start Guide 4 5 MB NETLink Ethernet Gateways, Quick Start Guide NETLink Ethernet Products, Manual 3 2 MB Expanded NETLink Functions, CPU-to-CPU Communication 5 2 MB NETLink PRO Family, Examples with RFC 1006 7 10 MB Expanded NETLink Functions, Project Specific Interface 4 1 MB EG Declaration of Confirmity 04-2016 42 KB EG Declaration of Confirmity - NETLink PRO700-881-MPI21NETLink PRO PoE
NETLink Ethernet Gateways, Quick Start Guide 4 5 MB NETLink Ethernet Gateways, Quick Start Guide NETLink Ethernet Products, Manual 3 2 MB Expanded NETLink Functions, Project Specific Interface 4 1 MB NETLink PRO Family, Examples with RFC 1006 7 10 MB EG Declaration of Confirmity 04-2016 43 KB EG Declaration of Confirmity - NETLink USB Compact700-892-MPI21NETLink USB Compact
NETLink USB Compact, Manual 2 385 KB NETLink USB Compact, Quick Start Guide 2 2 MB EG Declaration of Confirmity 04-2016 42 KB EG Declaration of Confirmity - DP/DP-Koppler700-158-0AD02DP/DP coupler
DP/DP Coupler, Manual 1 1 MB - DP/CAN Coupler700-650-CAN01CANopen Layer 2
EG Declaration of Confirmity 04-2016 41 KB EG Declaration of Confirmity DP/CAN Coupler, Manual 7 370 KB - DP/CAN Coupler700-651-CAN01Layer 2
EG Declaration of Confirmity 04-2016 41 KB EG Declaration of Confirmity DP/CAN Coupler Layer 2, Manual 8 984 KB - OPTopus700-991-1AA01Versatile Link, 650 nm, POF/PCF
OPTopus, Brief Instruction 4 2 MB EG Declaration of Confirmity 04-2016 40 KB EG Declaration of Confirmity - OPTopus700-992-1AA01BFOC, 650 nm, POF/PCF
OPTopus, Brief Instruction 4 2 MB EG Declaration of Confirmity 04-2016 43 KB EG Declaration of Confirmity - OPTopus700-993-1AA01SMA, 650 nm, POF/PCF
OPTopus, Brief Instruction 4 2 MB EG Declaration of Confirmity 04-2016 42 KB EG Declaration of Confirmity - FLEXtra® profiPoint700-972-1AA02FLEXtra® profiPoint
FLEXtra profiPoint, Leaflet 08-2017 261 KB EG Declaration of Confirmity 11-2016 45 KB EG Declaration of Confirmity - FLEXtra® profiPoint700-972-1XA02Set incl. PROFIBUS connector 90°, diagnosis, screw terminal with PG
FLEXtra profiPoint, Leaflet 08-2017 261 KB EG Declaration of Confirmity 11-2016 45 KB EG Declaration of Confirmity - CAN 300 PRO700-600-CAN12CAN 300 PRO
CAN 300 PRO, Manual 9 3 MB can300 CAN 300 PRO, Instruction CANopen Slave 3 464 KB can300 CAN 300 PRO, StartUpGuide CANopen 3 1 MB can300 CAN 300 PRO, Manual DS402 Example Maxon 4 396 KB can300 CAN 300 PRO, Manual DeviceNet Slave 1 258 KB can300 EU Declaration of Confirmity 05-2020 52 KB EU Declaration of Confirmity - CAN 400700-640-CAN21CAN 400-2, with 2 CAN interfaces
CAN 400, Manual 6 2 MB CAN 400, Manual DS402 Example ERL 1 505 KB CAN 400, Manual Maxon Example 3 377 KB CAN 400, Firmware History 670 B - CAN-Bridge700-660-2AA01CAN bridge, 2 x CAN bus interfaces
CAN Bridge, Manual 1 522 KB EU Declaration of Confirmity 05-2019 70 KB EU Declaration of Confirmity - CAN bus connector 90°700-690-1BB12with additional connection jack
CAN bus connector, 90°, installation instruction 561 KB EU Declaration of Confirmity 10-2018 43 KB EU Declaration of Confirmity - CAN bus connector 90°700-690-1BA12without additional connection jack
CAN bus connector, 90°, installation instruction 561 KB EU Declaration of Confirmity 10-2018 43 KB EU Declaration of Confirmity - CAN bus connector, axial700-690-0CA12CAN bus connector, axial
CAN Bus connector, axial, installation instruction 458 KB EU Declaration of Confirmity 10-2018 43 KB EU Declaration of Confirmity - S7 Memory Cards for 1200/1500 series700-954-8LC03Memory Card 4 MByte
EG Declaration of Confirmity 04-2016 36 KB EG Declaration of Confirmity - S7 Memory Cards for 1200/1500 series700-954-8LE03Memory Card 12 MByte
EG Declaration of Confirmity 04-2016 36 KB EG Declaration of Confirmity - S7 Memory Cards for 1200/1500 series700-954-8LF03Memory Card 24 MByte
EG Declaration of Confirmity 04-2016 36 KB EG Declaration of Confirmity - S7 Memory Cards for 1200/1500 series700-954-8LP03Memory Card 2 GByte
EG Declaration of Confirmity 04-2016 36 KB EG Declaration of Confirmity - DEA 300, 24 V DC700-321-1BH0216 inputs
DEA 300, Manual 12 8 MB - DEA 300, 24 V DC700-321-1BL0032 inputs
DEA 300, Manual 12 8 MB - DEA 300, AC 120 V700-321-1EL0032 inputs
DEA 300, Manual 12 8 MB - DEA 300, 24 V DC; 0,5 A700-322-1BH0116 outputs
DEA 300, Manual 12 8 MB - DEA 300, 24 V DC; 0,5 A700-322-1BL0032 outputs
DEA 300, Manual 12 8 MB - DEA 300, 24 V DC; 2 A, 8 outputs700-322-1BF01DEA 300, 24 V DC; 2 A, 8 outputs
DEA 300, Manual 12 8 MB - DEA 300, relay700-322-1HF018 outputs, 2 A
DEA 300, Manual 12 8 MB - DEA 300, relay700-322-1HF208 outputs, 5 A, quenching circuit
DEA 300, Manual 12 8 MB - DEA 300, 24 V DC; 0,5 A700-323-1BH018 inputs (24 V DC)/8 outputs (24 V DC, 0.5A)
DEA 300, Manual 12 8 MB - DEA 300, 24 V DC; 0,5 A700-323-1BL0016 inputs (24 V DC)/16 outputs (24 V DC, 0.5A)
DEA 300, Manual 12 8 MB - AEA 300, 0–10 V/4–20 mA700-332-5HB012-channel
AEA 300, Manual 5 2 MB - AEA 300, 0–10 V/4–20 mA700-332-5HD014-channel
AEA 300, Manual 5 2 MB - AEA 300, 8 inputs700-331-1KF01for connection of current, voltage transmitters, resistors
AEA 300, Manual 5 2 MB - AEA 300, 8 voltage inputs700-331-0V010AEA 300, 8 voltage inputs, for connecting voltage transmitters, 0-10 V
AEA 300, Manual 5 2 MB - AEA 300, 4 inputs, Pt100/Ni100700-331-PT100AEA 300, 4 inputs, Pt100/Ni100 for connecting resistance thermometers
AEA 300, Manual 5 2 MB - Dummy module700-370-0AA0120-pin
DEA 300, Manual 12 8 MB - Dummy module700-370-0AL0140-pin
DEA 300, Manual 12 8 MB - SAS 340-1700-340-1CH021 x RS422/RS485
SAS 340, Manual 2 907 KB - SAS 340-2700-340-2AH022 x RS232, 2 x USB
SAS 340, Manual 2 907 KB - SSW5/LAN, S5 Ethernet converter700-750-LAN13SSW5/LAN, S5 Ethernet converter
SSW5/LAN, Manual 3 245 KB - SSW5/USB S5-USB-Programmierkabel700-750-0US133 m
SSW5/USB, Manual 2 224 KB - SSW5/USB S5-USB-Programmierkabel700-750-1US135 m
SSW5/USB, Manual 2 224 KB - SSW7, MPI programming adapter700-751-1VK21RS232
- SSW7-USB, MPI programming adapter USB700-755-1VK21SSW7-USB, MPI programming adapter USB
SSW7-USB, Manual - Version 3 3 690 KB - SSW7-RK512, MPI-Adapter mit RK512-Protokoll700-751-5VK21SSW7-RK512, MPI adapter
SSW7-RK512, Manual 1 201 KB - SSW7-RK512, MPI-Adapter mit RK512-Protokoll700-752-5VK21SSW7-RK512, MPI adapter with RS422 interface
SSW7-RK512-RS422, Manual 1 238 KB - SSW7-HMI, MPI adapter with HMI protocoll700-751-9VK21SSW7-HMI, MPI adapter with HMI protocol
SSW7-HMI, Manual 4 192 KB - SAS 341-1700-341-1CH021 x RS422/RS485
SAS 341, Manual 2 1 MB SAS 341, Modbus Driver Manual 1 910 KB - SAS 341-2700-341-2AH022 x RS232, 2 x USB
SAS 341, Manual 2 1 MB SAS 341, Modbus Driver Manual 1 910 KB - TB20-C, bus coupler600-185-1AA11EtherCAT
TB20 – EtherCAT® Buskoppler, Manual 2 7 MB TB20, EtherCAT, Buskoppler, Manual EU Declaration of Confirmity 04-2020 55 KB EU Declaration of Confirmity - CAN-Software800-600-1AA11Handling blocks for CAN
CAN 300 PRO, Instruction CANopen Slave 3 464 KB can300 CAN 300 PRO, StartUpGuide CANopen 3 1 MB can300 CAN 300 PRO, Manual DS402 Example Maxon 4 396 KB can300 CAN 300 PRO, Manual DeviceNet Slave 1 258 KB can300 CAN 400, Manual 6 2 MB CAN 400, Manual DS402 Example ERL 1 505 KB CAN 400, Manual Maxon Example 3 377 KB CAN Bridge, Manual 1 522 KB - DI, DC 24 V, GND reading600-210-0DH01DI 8x DC 24 V, GND reading
TB20, Manual Modules 15 8 MB TB20, Manual Modules - DI, DC 24 V, GND reading600-210-0DP21DI 16x DC 24 V, GND reading
TB20, Manual Modules 15 8 MB TB20, Manual Modules - myREX24 V2 Free-AccountmyREX24 V2 Free-AccountmyREX24 V2 Free-Account
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for portal myREX24 V2: Quick Start Guide, REX 300 1 6 MB - CAN 300700-600-CAN01CAN 300
CAN 300, Manual 18 784 KB can300 - Industrial Ethernet-Switch700-840-5ES015-port, unmanaged, 10/100 Mbit
EG Declaration of Confirmity 122 KB EG Declaration of Confirmity Ethernet-Switch 5-port, Brief instruction 7 103 KB Ethernet-Switch 5-port, Brief instruction - DP/PN Coupler700-158-3DP02DP/PN Coupler
DP/PN Coupler V2, Quick Start Guide 9 1 MB DP/PN Coupler V2, Quick Start Guide DP/PN Coupler V2, PROFINET-Certificate 82 KB DP/PN Coupler V2, PROFINET-Certificate EU Declaration of Confirmity 04-2020 51 KB EU Declaration of Confirmity - Industrial Ethernet-Switch700-840-8ES018-port, unmanaged, 10/100 Mbit
EG Declaration of Confirmity 122 KB EG Declaration of Confirmity Ethernet-Switch 8-port, Brief instruction 7 132 KB Ethernet-Switch 8-port, Brief instruction Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A 28 KB Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A - PN/PN Coupler700-158-3PN02PN/PN Coupler
PN/PN Coupler V2, Quick Start Guide 7 1 MB PN/PN Coupler V2, Quick Start Guide PN/PN Coupler V2, PROFINET-Certificate 83 KB PN/PN Coupler V2, PROFINET-Certificate EU Declaration of Confirmity 04-2020 50 KB EU Declaration of Confirmity - Industrial Ethernet-Switch700-840-16S0116-port, unmanaged, 10/100Mbps
EG Declaration of Confirmity 122 KB EG Declaration of Confirmity Ethernet-Switch 16-port, Brief instruction 7 203 KB Ethernet-Switch 16-port, Brief instruction Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A 28 KB Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A - REX 200, Ethernet Router700-877-WAN02REX 200 WAN, 4 x LAN (switch)/1 x WAN port
Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) 6 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) - REX 200, Ethernet Router700-877-LTE02REX 200 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) 6 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) - REX 200, Ethernet Router700-877-WIF02REX 200 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) 6 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) EU Declaration of Confirmity 06-2021 60 KB EU Declaration of Confirmity - REX 250, Ethernet Router700-878-WAN02REX 250 WAN, 4 x LAN (switch)/1 x WAN interface
Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) 6 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) - REX 250, Ethernet Router700-878-UMT01REX 250 3G, 4 x LAN (switch)/1 x WAN/1 x 3G modem (UMTS)
Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) 6 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) - REX 250, Ethernet Router700-878-LTE02REX 250 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) 6 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) EU Declaration of Confirmity 05-2021 59 KB EU Declaration of Confirmity - REX 250, Ethernet Router700-878-WIF02REX 250 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
Quick Start Guide, REX 200/250 (700-87x-xxxx1) 5 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) 6 2 MB for Portal myREX24 V2: Quick Start Guide, REX200/250 (700-87x-xxxx2) EU Declaration of Confirmity 06-2021 60 KB EU Declaration of Confirmity - PROFINET-Switch700-850-16P0116-port, managed
PROFINET-Switch, FAQ 2 180 KB PROFINET-Switch 4/8/16-Port, Quick Start Guide 10 2 MB PROFINET-Switch 4/8/16-port, Manual 1 2 MB PROFINET-Switch 4/8/16-port, Manual PROFINET-Switch 4/8/16-port, Manual – as of firmware V1.10 4 6 MB PROFINET-Switch 4/8/16-port, Manual EG Declaration of Conformity 11-2021 89 KB EG Declaration of Conformity Advantages of a PROFINET-Switch 4 2 MB Advantages of a PROFINET-Switch PROFINET-Switch 16-port, PROFINET-Certificate 108 KB PROFINET-Switch 16-port, PROFINET-Certificate - REX 100 Ethernet Router700-875-LTE11REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (North America Version / “NAG“)
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 3G | LTE 2 4 MB - Industrial ethernet connector, RJ45, EasyConnect®700-901-1BB2290°
Industrial Ethernet Connector 90°, Brief instruction 2 192 KB Industrial Ethernet Connector 90°, Brief instruction - CAN 300700-600-CAN81CAN 300 DNV
CAN 300, Manual 18 784 KB can300 - PROFINET connector, RJ45, EasyConnect®700-901-1BB30145°
PROFINET Connector 145°, Brief instruction 3 362 KB PROFINET Connector 145°, Brief instruction - Industrial Ethernet-Switch700-841-16S0116-port, unmanaged, 10/100/1000 Mbit
Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A 28 KB Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A Ethernet-Switch 16-port, 10/100/1000MBit, Brief Instruction 2 124 KB Ethernet-Switch 16-port, 10/100/1000MBit, Brief Instruction - Industrial Ethernet-Switch700-841-8ES018-port, unmanaged, 10/100/1000 Mbit
Ethernet-Switch 8-port, 10/100/1000MBit, Brief Instruction 4 131 KB Ethernet-Switch 8-port, 10/100/1000MBit, Brief Instruction Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A 28 KB Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A - Industrial Ethernet-Switch700-841-5ES015-port, unmanaged, 10/100/1000 Mbit
Ethernet-Switch 5-port, 10/100/1000MBit, Brief Instruction 4 125 KB Ethernet-Switch 5-port, 10/100/1000MBit, Brief Instruction Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A 28 KB Industrial Ethernet-Switch, Manufacturer declaration PROFINET Conformance Class A - PN/ModbusTCP Coupler700-159-3MB02PN/ModbusTCP Coupler
PN/ModbusTCP Coupler, Quick Start Guide 5 1 MB PN/ModbusTCP Coupler, Quick Start Guide PN/ModbusTCP Coupler, PROFINET-Certificate 83 KB PN/ModbusTCP Coupler, PROFINET-Certificate EU Declaration of Confirmity 04-2020 54 KB EU Declaration of Confirmity - PROFINET-Switch IP67700-857-8PS018-Port, managed, IP67
PROFINET-Switch, FAQ 2 180 KB PROFINET-Switch 8-port, IP67, Quick Start Guide 1 9 MB PROFINET-Switch 8-port, IP67, Quick Start Guide Advantages of a PROFINET-Switch 4 2 MB Advantages of a PROFINET-Switch PROFINET-Switch 8-port, IP67, PROFINET-Certificate 108 KB PROFINET-Switch 8-port, IP67, PROFINET-Certificate EU Declaration of Confirmity 11-2021 86 KB EU Declaration of Confirmity - Industrial Ethernet-Switch IP67700-847-8ES01Ethernet-Switch 8-port, unmanaged, 10/100 Mbit, IP67
Ethernet-Switch 8-port, IP67, Brief Instruction 3 1 MB Ethernet-Switch 8-port, IP67, Brief Instruction EU Declaration of Confirmity 11-2021 84 KB EU Declaration of Confirmity - DP/PN Coupler700-158-3DP01DP/PN Coupler V1
DP/PN Coupler, Quick Start Guide 2 1 MB DP/PN Coupler, Quick Start Guide - AI, R, RTD, 16 bit600-253-4AB01AI 1/2x R, RTD, 16 Bit, 2/3/4 wire
TB20, Manual Modules 15 8 MB TB20, Manual Modules - REX 100 Ethernet Router700-875-LTE51REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE-Modem (EU- & Asia-Version)
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 3G | LTE 2 4 MB - REX 100 Ethernet Router700-875-WIF51REX 100 WiFi, 3 x LAN (switch)/1 x WAN/1 x WiFi interface
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 WAN | WiFi 2 4 MB EU Declaration of Conformity 05-2021 46 KB EU Declaration of Conformity, REX 100 WiFi - PN/EtherNetIP Coupler700-160-3EN02PN/EtherNetIP Coupler
PN/EthernetIP Coupler, Quick Start Guide 4 788 KB PN/EthernetIP Coupler, Quick Start Guide PN/EthernetIP Coupler, PROFINET-Certificate 82 KB PN/EthernetIP Coupler, PROFINET-Certificate EU Declaration of Confirmity 04-2020 53 KB EU Declaration of Confirmity - FLEXtra PROFINET-Switch700-855-16P0116-Port, managed, 10/100/1000Mbps
PROFINET-Switch, FAQ 2 180 KB Advantages of a PROFINET-Switch 4 2 MB Advantages of a PROFINET-Switch FLEXtra PROFINET-Switch 16-port, PROFINET-Certificate 82 KB FLEXtra PROFINET-Switch 16-port, PROFINET-Certificate FLEXtra PROFINET-Switch 16-Port, Quick Start Guide 2 685 KB FLEXtra PROFINET-Switch 16-Port, Quick Start Guide FLEXtra PROFINET-Switch 16-port, Manual 1 2 MB FLEXtra PROFINET-Switch 16-port, Manual - PN/CAN-Gateway700-670-PNC01PROFINET/CANopen Master
EG Declaration of Confirmity 06-2019 78 KB EG-Konformitätserklärung PN/CAN-Gateway CANopen®, Quick Start Guide 3 2 MB PN/CAN-Gateway CANopen, Manual 4 1 MB - PN/CAN-Gateway700-673-PNC01PROFINET/SAE J1939
EG Declaration of Confirmity 06-2019 78 KB EG-Konformitätserklärung - AI 8x U, ±100 V, 0-100 V, Iso., 16 Bit600-252-7DH21AI 8x U, ±100 V, 0-100 V, Iso., 16 Bit
TB20, Manual Modules 15 8 MB TB20, Manual Modules - Industrial ethernet connector, RJ45, EasyConnect®700-901-1BB12180°
Industrial Ethernet Connector 180°, Brief instruction 3 314 KB Industrial Ethernet Connector 180°, Brief instruction - PN/MQTT Coupler700-162-3MQ02PN/MQTT Coupler
PN/MQTT Coupler, Quick Start Guide 6 1 MB PN/MQTT Coupler, Quick Start Guide PN/MQTT Coupler, Manual 4 4 MB PN/MQTT Coupler, Manual PN/MQTT Coupler, PROFINET-Certificate 83 KB PN/MQTT Coupler, PROFINET-Certificate - REX 100 Ethernet Router700-875-LTE61REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE modem (North America Version / “NAG“)
for Portal myREX24 V2: Quick Start Guide, REX 100 11 1 MB for Portal myREX24 V2: Quick Start Guide, REX 100 for portal myREX24 V1: Quick Start Guide, REX 100 3G | LTE 2 4 MB - FLEXtra Ethernet-Switch700-845-16S0116-Port, unmanaged, 10/100/1000 Mbps
FLEXtra Ethernet-Switch 16-port, Brief instruction 1 148 KB FLEXtra Ethernet-Switch 16-port, Brief instruction - FLEXtra PROFINET-Switch FO700-856-8FO2110-Port, managed, 10/100/1000 Mbps
PROFINET-Switch, FAQ 2 180 KB Advantages of a PROFINET-Switch 4 2 MB Advantages of a PROFINET-Switch FLEXtra PROFINET-Switch FO 10-Port, Quick Start Guide 792 KB FLEXtra PROFINET-Switch FO, FLEXtra, PROFINET-Switch, PROFINET, Switch, Fiber-Optic, FO - TAP IE 100700-800-TAP01TAP IE 100, Ethernet Test Access Point, 10/100 Mbps
TAP IE 100, Quick Start Guide 1 333 KB TAP IE 100, Ethernet Test Access Point, Industrial Ethernet - WALL IE PLUS700-862-WAL01WALL IE PLUS – Industrial NAT Gateway/Firewall
WALL IE / WALL IE PLUS, Quick Start Guide 15 2 MB WALLIE, Wall IE, Wallie, WALL IE Plus, WALLIE PLUS WALL IE / WALL IE PLUS, Manual 10 3 MB WALLIE, Wall IE, Wallie, WALL IE Plus, WALLIE PLUS - FLEXtra PROFINET-Switch FO700-856-12F4116-Port, managed, 10/100/1000 Mbps
PROFINET-Switch, FAQ 2 180 KB Advantages of a PROFINET-Switch 4 2 MB Advantages of a PROFINET-Switch FLEXtra PROFINET-Switch FO 16 port, Quick Start Guide V2 1 MB FLEXtra PROFINET-Switch FO 16 port, Quick Start Guide - WALL IE Compact700-863-WAL01WALL IE Compact – Industrial NAT Gateway/Firewall
WALL IE / WALL IE PLUS, Manual 10 3 MB WALLIE, Wall IE, Wallie, WALL IE Plus, WALLIE PLUS EG Declaration of Confirmity 03-2019 86 KB EG Declaration of Confirmity WALL IE / WALL IE PLUS / WALL IE Compact Quickstart Guide 16 2 MB WALLIE, Wall IE, Wallie, WALL IE Plus, WALLIE PLUS, WALL IE Compact, WALLIE COMPACT
Whitepapers
- REX 100 Ethernet Router700-875-WAN01REX 100 WAN, 3 x LAN (switch)/1 x WAN interface
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB - REX 100 Ethernet Router700-875-UMT01REX 100 3G, 4 x LAN (switch)/1 x 3G modem (UMTS)
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB - REX 100 Ethernet Router700-875-LTE01REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (EU- & Asia-Version)
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB - REX 100 Ethernet Router700-875-WIF01REX 100 WiFi, 4 x LAN (switch)/1 x WiFi interface
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB - REX 300, Ethernet Router700-872-MDM02REX 300 WAN+analog Modem, PROFIBUS/MPI, serial interface
- REX 300, Ethernet Router700-873-WAN02REX 300, WAN, PROFIBUS/MPI, serial port
- REX 300, Ethernet Router700-874-UMT02REX 300 eco UMTS
- S7 Micro Memory Cards700-953-8LF31Micro Memory Card, 64 kByte
Deleting MMCs 71 KB - S7 Micro Memory Cards700-953-8LG31Micro Memory Card, 128 kByte
Deleting MMCs 71 KB - S7 Micro Memory Cards700-953-8LH31Micro Memory Card, 256 kByte
Deleting MMCs 71 KB - S7 Micro Memory Cards700-953-8LJ31Micro Memory Card, 512 kByte
Deleting MMCs 71 KB - S7 Micro Memory Cards700-953-8LK31Micro Memory Card, 1 MByte
Deleting MMCs 71 KB - S7 Micro Memory Cards700-953-8LL31Micro Memory Card, 2 MByte
Deleting MMCs 71 KB - S7 Micro Memory Cards700-953-8LM31Micro Memory Card, 4 MByte
Deleting MMCs 71 KB - S7 Micro Memory Cards700-953-8LP31Micro Memory Card, 8 MByte
Deleting MMCs 71 KB - myREX24 V2 Free-AccountmyREX24 V2 Free-AccountmyREX24 V2 Free-Account
- myREX24 V2 Options800-874-ACT01Annual license for an additional active VPN connection
- myREX24 V2 Options800-874-WEB01Annual license for unlimited Web2Go connections
- myREX24 V2 Options800-874-DSH50Annual license for 50 additional dashboards
- myREX24 V2 Options800-872-CAL25Provision of 250 additional voice calls
- myREX24 V2 Options800-874-ALM25Annual license for 250 alarms
- myREX24 V2 Options800-874-TSK05Annual license for 5 additional tasks for the scheduler
- myREX24 V2 Options800-874-USR01Annual license for expanded user access control
- myREX24 V2 Options800-874-DPS01Annual license for 1 M additional data points in the myREX24 V2 data point memory
- myREX24 V2 Options800-874-EXT01Annual license for external database memory
- myREX24 V2 Options800-874-VPN10Annual license for standard VPN clients + 10 units
- myREX24 V2 Options800-874-CMB01Annual license for own front logo
- myREX24 V2 Options800-874-CMA01Annual license for complete individualization (colors + logo)
- myREX24 V2 Options800-872-SMS25Provision of 250 additional SMS
- myREX24 V2 VirtualmyREX24 V2 VirtualmyREX24 V2 Virtual
- REX 200, Ethernet Router700-877-WAN02REX 200 WAN, 4 x LAN (switch)/1 x WAN port
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper REX 200/250, Whitepaper OpenVPN Client/Router 1 2 MB REX 200/250, Whitepaper OpenVPN Client/Router - REX 200, Ethernet Router700-877-LTE02REX 200 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper REX 200/250, Whitepaper OpenVPN Client/Router 1 2 MB REX 200/250, Whitepaper OpenVPN Client/Router - REX 200, Ethernet Router700-877-WIF02REX 200 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper REX 200/250, Whitepaper OpenVPN Client/Router 1 2 MB REX 200/250, Whitepaper OpenVPN Client/Router - REX 250, Ethernet Router700-878-WAN02REX 250 WAN, 4 x LAN (switch)/1 x WAN interface
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper REX 200/250, Whitepaper OpenVPN Client/Router 1 2 MB REX 200/250, Whitepaper OpenVPN Client/Router - REX 250, Ethernet Router700-878-UMT01REX 250 3G, 4 x LAN (switch)/1 x WAN/1 x 3G modem (UMTS)
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper REX 200/250, Whitepaper OpenVPN Client/Router 1 2 MB REX 200/250, Whitepaper OpenVPN Client/Router - REX 250, Ethernet Router700-878-LTE02REX 250 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper REX 200/250, Whitepaper OpenVPN Client/Router 1 2 MB REX 200/250, Whitepaper OpenVPN Client/Router - REX 250, Ethernet Router700-878-WIF02REX 250 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper REX 200/250, Whitepaper OpenVPN Client/Router 1 2 MB REX 200/250, Whitepaper OpenVPN Client/Router - REX 100 Ethernet Router700-875-LTE11REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (North America Version / “NAG“)
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB - REX 100 Ethernet Router700-875-LTE51REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE-Modem (EU- & Asia-Version)
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB - REX 100 Ethernet Router700-875-WIF51REX 100 WiFi, 3 x LAN (switch)/1 x WAN/1 x WiFi interface
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB - REX 100 Ethernet Router700-875-LTE61REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE modem (North America Version / “NAG“)
Change Service - REX 3G to LTE, Whitepaper 351 KB Change Service - REX 3G to LTE, Whitepaper myREX24 V2, Whitepaper Device transfer 3 834 KB
Flyers
- REX 100 Ethernet Router700-875-WAN01REX 100 WAN, 3 x LAN (switch)/1 x WAN interface
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 100 Ethernet Router700-875-UMT01REX 100 3G, 4 x LAN (switch)/1 x 3G modem (UMTS)
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 100 Ethernet Router700-875-LTE01REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (EU- & Asia-Version)
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 100 Ethernet Router700-875-WIF01REX 100 WiFi, 4 x LAN (switch)/1 x WiFi interface
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 300, Ethernet Router700-872-MDM02REX 300 WAN+analog Modem, PROFIBUS/MPI, serial interface
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 300, Ethernet Router700-873-WAN02REX 300, WAN, PROFIBUS/MPI, serial port
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 300, Ethernet Router700-874-UMT02REX 300 eco UMTS
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - WALL IE700-860-WAL01WALL IE – Industrial NAT Gateway/Firewall
WALL IE NAT Gateway/Firewall - simple machine integration 10-2022 1 MB WALLIE, Wall IE, Wallie - PROFINET-Switch700-850-4PS014-port, managed
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - PROFINET-Switch700-850-8PS018-port, managed
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - TB20-C, bus coupler600-180-1AA11PROFINET IO
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - TB20-C, Bus coupler600-151-1AA11PROFIBUS-DP
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - TB20-C, bus coupler600-160-1AA11CANopen Slave
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - TB20-C, Bus coupler600-170-1AA11ModbusTCP
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - TB20-C, bus coupler600-175-1AA11EtherNet/IP
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - TB20-C, bus coupler600-165-1AA11DeviceNet Slave
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V600-210-0AB01DI 2x DC 24 V
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V600-210-0AD01DI 4x DC 24 V
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V600-210-0AH01DI 8x DC 24 V
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V600-210-0AP21DI 16x DC 24 V
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V, 3-wire600-210-0CC01DI 3x DC 24 V, 3-wire
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V, 3-wire600-210-0CF21DI 6x DC 24 V, 3-wire
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, AC 230 V, per channel N, Type 1600-211-0BB01DI 2x AC 230 V, per channel N, Type 1
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, AC 230 V, per channel N, Type 1600-211-0BD01DI 4x AC 230 V, per channel N, Type 1
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, AC 230 V, per channel N, Type 1600-211-0BH21DI 8x AC 230 V, per channel N, Type 1
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 500 mA600-220-0AD01DO 4x DC 24 V, 500 mA
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 500 mA600-220-0AH01DO 8x DC 24 V, 500 mA
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 500 mA600-220-0AP21DO 16x DC 24 V, 500 mA
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 700 mA, Highfeature600-220-7AD01DO 4x DC 24 V, 700 mA, Highfeature
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 700 mA, Highfeature600-220-7AH01DO 8 x DC 24 V, 700 mA, Highfeature
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 700 mA, Highfeature600-220-7AP21DO 16 x DC 24 V, 700 mA, Highfeature
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 2 A600-220-0BB01DO 2x DC 24 V, 2 A
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 2 A600-220-0BD01DO 4x DC 24 V, 2 A
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, Relais600-222-0AB01DO 2x relays, 5 A, AC 230 V, changeover
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, Relais600-222-0AD21DO 4x relays, 5 A, AC 230 V, changeover
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DIO, DC 24 V, 500 mA600-230-0AD01DIO 2x In/2x Out DC 24 V, 500 mA
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DIO, DC 24 V, 500 mA600-230-0AH01DIO 4x In/4x Out DC 24 V, 500 mA
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DIO, DC 24 V, 500 mA600-230-0AP21DIO 8x In/8x Out DC 24 V, 500 mA
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 12 Bit, I600-250-4AB01AI 2x I, 0/4-20 mA, ±20 mA, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 12 Bit, I600-250-4AD01AI 4x I, 0/4-20 mA, ±20 mA, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, I600-250-7BB01AI 2 x I, 0/4-20 mA, ±20 mA, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, I600-250-7BD01AI 4 x I, 0/4-20 mA, ±20 mA, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, I600-250-7BH21AI 8 x I, 0/4-20 mA, ±20 mA, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 12 Bit, U, ±10V600-252-4AB01AI 2x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 12 Bit, U, ±10V600-252-4AD01AI 4x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, U, ±10V600-252-7BB01AI 2x U, ±10 V, 0-10 V, 1-5 V, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, U, ±10V600-252-7BD01AI 4x U, ±10 V, 0-10 V, 1-5 V, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, U, ±10V600-252-7BH21AI 8x U, ±10 V, 0-10 V, 1-5 V, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 12 Bit, U, ±24V600-252-4CB01AI 2x U, ±24 V, 0-24 V, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 12 Bit, U, ±24V600-252-4CD01AI 4x U, ±24 V, 0-24 V, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, R, RTD, 16 bit600-253-4BH21AI 8 x R, RTD, 16 Bit, 2 wire
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, R, RTD, 16 bit600-253-4AD01AI 2/4x R, RTD, 16 Bit, 2/3/4 wire
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, TC, Iso.600-254-4AD02AI 4x TC, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AI, 16 Bit, TC, Iso.600-254-4AH22AI 8x TC, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AO, 12 Bit, U600-261-4AB01AO 2 x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AO, 12 Bit, U600-261-4AD01AO 4 x U, ±10 V, 0-10 V, 1-5 V, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AO, 12 Bit, I600-260-4AB01AO 2x I, 0/4-20 mA, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - AO, 12 Bit, I600-260-4AD01AO 4x I, 0/4-20 mA, 12 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Strain gauge weighing module600-256-7AA01Strain gauge weighing module
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Counter600-300-7AA011x Counter 24 V, 500 kHz, 32 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Counter600-310-7AA011x Counter 5 V (RS422), 4 MHz, 32 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Counter600-300-1AB012x Counter Economy 24 V, 1 kHz, 32 bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Counter600-300-1AD014x Counter Economy 24 V, 1 kHz, 32 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - SSI encoder interface600-320-7AA011 x SSI encoder interface
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Energy Meter600-255-7AA21Energy Meter, 1 A
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Energy Meter600-255-7BA21Energy Meter, 5 A
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Power and isolation module, DC 24 V, 8 A600-710-0AA01Power and isolation module, DC 24 V, 8 A
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Potential distributors600-720-0AH01Potential distributor 9x DC 24 V
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Potential distributors600-720-0BH01Potential distributor 9x GND
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Potential distributors600-720-0CH01Potential distributor 10x AUX
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Potential distributors600-720-0DH01Potential distributor 4x DC 24 V + 4x GND
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Potential distributors600-720-0XH01Potential distributor 9x free
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Potential distributors600-730-4AD01Potential distributor 4x DC 24 V, Highfeature, short-circuit protection, with alarms
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Power module DC 24 V600-700-0AA01Power module DC 24 V
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - PROFINET connector, RJ45, EasyConnect®700-901-1BB2090°
Product Overview - components for PROFINET and industrial networks 03-2021 3 MB Product Overview components for PROFINET and industrial networks - PROFINET connector, RJ45, EasyConnect®700-901-1BB10180°
Product Overview - components for PROFINET and industrial networks 03-2021 3 MB Product Overview components for PROFINET and industrial networks - PN/CAN-Gateway700-672-PNC01PROFINET/CANopen Slave
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - PN/CAN-Gateway700-671-PNC01PROFINET/CAN Layer 2
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - S7 Memory Cards for 1200/1500 series700-954-8LC03Memory Card 4 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Memory Cards for 1200/1500 series700-954-8LE03Memory Card 12 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Memory Cards for 1200/1500 series700-954-8LF03Memory Card 24 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Memory Cards for 1200/1500 series700-954-8LL03Memory Card 256 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Memory Cards for 1200/1500 series700-954-8LP03Memory Card 2 GByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LF31Micro Memory Card, 64 kByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LG31Micro Memory Card, 128 kByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LH31Micro Memory Card, 256 kByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LJ31Micro Memory Card, 512 kByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LK31Micro Memory Card, 1 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LL31Micro Memory Card, 2 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LM31Micro Memory Card, 4 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - S7 Micro Memory Cards700-953-8LP31Micro Memory Card, 8 MByte
Memory Cards for the S7 series 04-2021 890 KB Memory Cards for the S7 series S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, 24 V DC700-321-1BH0216 inputs
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, 24 V DC700-321-1BL0032 inputs
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, AC 120 V700-321-1EL0032 inputs
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, 24 V DC; 0,5 A700-322-1BH0116 outputs
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, 24 V DC; 0,5 A700-322-1BL0032 outputs
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, 24 V DC; 2 A, 8 outputs700-322-1BF01DEA 300, 24 V DC; 2 A, 8 outputs
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, relay700-322-1HF018 outputs, 2 A
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, relay700-322-1HF208 outputs, 5 A, quenching circuit
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, 24 V DC; 0,5 A700-323-1BH018 inputs (24 V DC)/8 outputs (24 V DC, 0.5A)
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - DEA 300, 24 V DC; 0,5 A700-323-1BL0016 inputs (24 V DC)/16 outputs (24 V DC, 0.5A)
S7 Components from Helmholz - The clever alternative 08-2022 964 KB S7 Components from Helmholz - The clever alternative - TB20 ToolBoxXXX-XXX-XXXXXTB20 ToolBox
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - TB20, macros for EPLAN Electric P8*TB20, macros for EPLAN Electric P8*
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - TB20-C, bus coupler600-185-1AA11EtherCAT
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V, GND reading600-210-0DH01DI 8x DC 24 V, GND reading
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DI, DC 24 V, GND reading600-210-0DP21DI 16x DC 24 V, GND reading
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Flyer WALL IEProtect and connect industrial networks
WALL IE NAT Gateway/Firewall - simple machine integration 10-2022 1 MB WALLIE, Wall IE, Wallie - Flyer TB20 OverviewTB20. Distributed fieldbus I/O system
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - Flyer REX router, myREX24Secure IOT remote maintenance access
REX Ethernet-Router - Next Generation Remote Access 02-2019 2 MB REX Ethernet-Router - Next Generation Remote Access - DO, DC 24 V, 300 mA, sink600-220-0DH01DO 8x DC 24 V, 300 mA, sink
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - DO, DC 24 V, 300 mA, sink600-220-0DP21DO 16 x DC 24 V, 300 mA, sink
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - myREX24 V2 Free-AccountmyREX24 V2 Free-AccountmyREX24 V2 Free-Account
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-ACT01Annual license for an additional active VPN connection
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-WEB01Annual license for unlimited Web2Go connections
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-DSH50Annual license for 50 additional dashboards
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-872-CAL25Provision of 250 additional voice calls
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-ALM25Annual license for 250 alarms
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-TSK05Annual license for 5 additional tasks for the scheduler
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-USR01Annual license for expanded user access control
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-DPS01Annual license for 1 M additional data points in the myREX24 V2 data point memory
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-EXT01Annual license for external database memory
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-VPN10Annual license for standard VPN clients + 10 units
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-CMB01Annual license for own front logo
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-874-CMA01Annual license for complete individualization (colors + logo)
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 Options800-872-SMS25Provision of 250 additional SMS
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - myREX24 V2 VirtualmyREX24 V2 VirtualmyREX24 V2 Virtual
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB - Industrial Ethernet-Switch700-840-5ES015-port, unmanaged, 10/100 Mbit
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - DP/PN Coupler700-158-3DP02DP/PN Coupler
DP/PN Coupler - PROFIBUS PROFINET easily connected 11-2019 586 KB DP/PN Coupler - PROFIBUS PROFINET easily connected Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - Industrial Ethernet-Switch700-840-8ES018-port, unmanaged, 10/100 Mbit
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - PN/PN Coupler700-158-3PN02PN/PN Coupler
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - Industrial Ethernet-Switch700-840-16S0116-port, unmanaged, 10/100Mbps
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - REX 200, Ethernet Router700-877-WAN02REX 200 WAN, 4 x LAN (switch)/1 x WAN port
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB - REX 200, Ethernet Router700-877-LTE02REX 200 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB - REX 200, Ethernet Router700-877-WIF02REX 200 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 02-2019 717 KB Form WAN router Configuration data myRex24 V2 - FR 02-2019 2 MB Form WAN router Configuration data myRex24 V2 - CN 02-2019 2 MB - REX 250, Ethernet Router700-878-WAN02REX 250 WAN, 4 x LAN (switch)/1 x WAN interface
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 250, Ethernet Router700-878-UMT01REX 250 3G, 4 x LAN (switch)/1 x WAN/1 x 3G modem (UMTS)
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 250, Ethernet Router700-878-LTE02REX 250 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 250, Ethernet Router700-878-WIF02REX 250 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - PROFINET-Switch700-850-16P0116-port, managed
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - REX 100 Ethernet Router700-875-LTE11REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (North America Version / “NAG“)
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - PROFINET connector, RJ45, EasyConnect®700-901-1BB30145°
Product Overview - components for PROFINET and industrial networks 03-2021 3 MB Product Overview components for PROFINET and industrial networks - Industrial Ethernet-Switch700-841-16S0116-port, unmanaged, 10/100/1000 Mbit
Ethernet-Switches – Highspeed Ethernet Communication up to 1 Gigabit 10-2020 797 KB Ethernet-Switches – Highspeed Ethernet Communication up to 1 Gigabit Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - Industrial Ethernet-Switch700-841-8ES018-port, unmanaged, 10/100/1000 Mbit
Ethernet-Switches – Highspeed Ethernet Communication up to 1 Gigabit 10-2020 797 KB Ethernet-Switches – Highspeed Ethernet Communication up to 1 Gigabit Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - Industrial Ethernet-Switch700-841-5ES015-port, unmanaged, 10/100/1000 Mbit
Ethernet-Switches – Highspeed Ethernet Communication up to 1 Gigabit 10-2020 797 KB Ethernet-Switches – Highspeed Ethernet Communication up to 1 Gigabit Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - PN/ModbusTCP Coupler700-159-3MB02PN/ModbusTCP Coupler
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - PROFINET-Switch IP67700-857-8PS018-Port, managed, IP67
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - Industrial Ethernet-Switch IP67700-847-8ES01Ethernet-Switch 8-port, unmanaged, 10/100 Mbit, IP67
Automatisierung innovativ vernetzen – PROFINET und Ethernet-Switches 08-2022 2 MB Automatisierung innovativ vernetzen – PROFINET und Ethernet-Switches - DP/PN Coupler700-158-3DP01DP/PN Coupler V1
DP/PN Coupler - PROFIBUS PROFINET easily connected 11-2019 586 KB DP/PN Coupler - PROFIBUS PROFINET easily connected Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - AI, R, RTD, 16 bit600-253-4AB01AI 1/2x R, RTD, 16 Bit, 2/3/4 wire
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - REX 100 Ethernet Router700-875-LTE51REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE-Modem (EU- & Asia-Version)
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - REX 100 Ethernet Router700-875-WIF51REX 100 WiFi, 3 x LAN (switch)/1 x WAN/1 x WiFi interface
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - PN/EtherNetIP Coupler700-160-3EN02PN/EtherNetIP Coupler
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - FLEXtra PROFINET-Switch700-855-16P0116-Port, managed, 10/100/1000Mbps
FLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device 06-2021 1 MB FLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - PN/CAN-Gateway700-670-PNC01PROFINET/CANopen Master
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - PN/CAN-Gateway700-673-PNC01PROFINET/SAE J1939
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - AI 8x U, ±100 V, 0-100 V, Iso., 16 Bit600-252-7DH21AI 8x U, ±100 V, 0-100 V, Iso., 16 Bit
Flyer, TB20 IO-system for numerous applications 08-2022 6 MB TB20 IO-system for numerous applications - PN/MQTT Coupler700-162-3MQ02PN/MQTT Coupler
Easy connection of fieldbus networks – with Helmholz PROFINET gateways 11-2021 1 MB Easy connection of fieldbus networks – with Helmholz PROFINET gateways - REX 100 Ethernet Router700-875-LTE61REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE modem (North America Version / “NAG“)
myREX24 virtual server - Machine data in your own hands 07-2019 1 MB myREX24 virtual server - Machine data in your own hands REX Ethernet-Router - Next Generation Remote Access 04-2022 2 MB REX Ethernet-Router - Next Generation Remote Access Form WAN router Configuration data myRex24 V2 - EN 717 KB Form WAN router Configuration data myRex24 V2 - CN 2 MB Form WAN router Configuration data myRex24 V2 - FR 2 MB - FLEXtra Ethernet-Switch700-845-16S0116-Port, unmanaged, 10/100/1000 Mbps
Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - FLEXtra PROFINET-Switch FO700-856-8FO2110-Port, managed, 10/100/1000 Mbps
FLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device 06-2021 1 MB FLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - WALL IE PLUS700-862-WAL01WALL IE PLUS – Industrial NAT Gateway/Firewall
WALL IE NAT Gateway/Firewall - simple machine integration 10-2022 1 MB WALLIE, Wall IE, Wallie - FLEXtra PROFINET-Switch FO700-856-12F4116-Port, managed, 10/100/1000 Mbps
FLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device 06-2021 1 MB FLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device Innovatively networking automation – PROFINET and Ethernet-Switches 08-2022 2 MB Innovatively networking automation – PROFINET and Ethernet-Switches - WALL IE Compact700-863-WAL01WALL IE Compact – Industrial NAT Gateway/Firewall
WALL IE NAT Gateway/Firewall - simple machine integration 10-2022 1 MB WALLIE, Wall IE, Wallie
License Agreements
- REX 100 Ethernet Router700-875-WAN01REX 100 WAN, 3 x LAN (switch)/1 x WAN interface
- REX 100 Ethernet Router700-875-UMT01REX 100 3G, 4 x LAN (switch)/1 x 3G modem (UMTS)
- REX 100 Ethernet Router700-875-LTE01REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (EU- & Asia-Version)
- REX 100 Ethernet Router700-875-WIF01REX 100 WiFi, 4 x LAN (switch)/1 x WiFi interface
- REX 300, Ethernet Router700-872-MDM02REX 300 WAN+analog Modem, PROFIBUS/MPI, serial interface
- REX 300, Ethernet Router700-873-WAN02REX 300, WAN, PROFIBUS/MPI, serial port
- REX 300, Ethernet Router700-874-UMT02REX 300 eco UMTS
- WALL IE700-860-WAL01WALL IE – Industrial NAT Gateway/Firewall
WALL IE, OpenSource licence terms 179 KB WALLIE, Wall IE, Wallie - PROFINET-Switch700-850-4PS014-port, managed
IPSet, OpenSource license terms 25 KB PROFINET switch, 16-port, Open Source License Terms 555 KB PROFINET switch, 16-port, Open Source License Terms - PROFINET-Switch700-850-8PS018-port, managed
IPSet, OpenSource license terms 25 KB PROFINET switch, 16-port, Open Source License Terms 555 KB PROFINET switch, 16-port, Open Source License Terms - PN/CAN-Gateway700-672-PNC01PROFINET/CANopen Slave
- PN/CAN-Gateway700-671-PNC01PROFINET/CAN Layer 2
- myREX24 V2 Free-AccountmyREX24 V2 Free-AccountmyREX24 V2 Free-Account
- DP/PN Coupler700-158-3DP02DP/PN Coupler
DP/PN Coupler, license terms 314 KB DP/PN Coupler, license terms - PN/PN Coupler700-158-3PN02PN/PN Coupler
PN/PN Coupler, license terms 314 KB PN/PN Coupler, license terms - REX 200, Ethernet Router700-877-WAN02REX 200 WAN, 4 x LAN (switch)/1 x WAN port
- REX 200, Ethernet Router700-877-LTE02REX 200 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
- REX 200, Ethernet Router700-877-WIF02REX 200 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
- REX 250, Ethernet Router700-878-WAN02REX 250 WAN, 4 x LAN (switch)/1 x WAN interface
- REX 250, Ethernet Router700-878-UMT01REX 250 3G, 4 x LAN (switch)/1 x WAN/1 x 3G modem (UMTS)
- REX 250, Ethernet Router700-878-LTE02REX 250 LTE, 4 x LAN (switch)/1 x WAN/1 x LTE modem
- REX 250, Ethernet Router700-878-WIF02REX 250 WiFi, 4 x LAN (Switch)/1 x WAN/1 x WiFi interface
- PROFINET-Switch700-850-16P0116-port, managed
IPSet, OpenSource license terms 25 KB PROFINET switch, 16-port, Open Source License Terms 555 KB PROFINET switch, 16-port, Open Source License Terms - REX 100 Ethernet Router700-875-LTE11REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (North America Version / “NAG“)
- DP/PN Coupler700-158-3DP01DP/PN Coupler V1
DP/PN Coupler, license terms 314 KB DP/PN Coupler, license terms - REX 100 Ethernet Router700-875-LTE51REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE-Modem (EU- & Asia-Version)
- REX 100 Ethernet Router700-875-WIF51REX 100 WiFi, 3 x LAN (switch)/1 x WAN/1 x WiFi interface
- FLEXtra PROFINET-Switch700-855-16P0116-Port, managed, 10/100/1000Mbps
- PN/CAN-Gateway700-670-PNC01PROFINET/CANopen Master
- PN/CAN-Gateway700-673-PNC01PROFINET/SAE J1939
- REX 100 Ethernet Router700-875-LTE61REX 100 LTE, 3 x LAN (switch)/1 x WAN/1 x LTE modem (North America Version / “NAG“)
- FLEXtra PROFINET-Switch FO700-856-8FO2110-Port, managed, 10/100/1000 Mbps
- WALL IE PLUS700-862-WAL01WALL IE PLUS – Industrial NAT Gateway/Firewall
WALL IE, OpenSource licence terms 179 KB WALLIE, Wall IE, Wallie - FLEXtra PROFINET-Switch FO700-856-12F4116-Port, managed, 10/100/1000 Mbps
- WALL IE Compact700-863-WAL01WALL IE Compact – Industrial NAT Gateway/Firewall
WALL IE, OpenSource licence terms 179 KB WALLIE, Wall IE, Wallie
Software
- REX 100 Ethernet Router700-875-WAN01REX 100 WAN, 3 x LAN (switch)/1 x WAN interface
REX 100, Firmware 2.2.11 14 MB History Version 2.2.11 (07.04.2022)
***************************************************************************************************************
Bugfix
[MINI-75] - Cellular connections didn´t work while using connect on demand (digital input or Function button)***************************************************************************************************************
Version 2.2.10 (14.03.2022)
***************************************************************************************************************
Optimization
[MINI-74] - DNS-Server negotiation with mobile service provider optimized
[MINI-73] - (2.2.9) Increase timeout for cellular network-test***************************************************************************************************************
Version 2.2.8 (08.12.2021)
***************************************************************************************************************
Bugfix
[MINI-71] - DNS server entries were in wrong order
[MINI-72] - Old assigned DNS server from DHCP weren´t deleted***************************************************************************************************************
Version 2.2.7 (02.09.2021)
***************************************************************************************************************
Bugfix
[MINI-68] - [Bug: MB-897] VPN connection problem after factory reset and configuration
[MINI-69] - [Bug: MB-899] Occasional connection loss of cellular connection which won´t reconnectOptimization
[MINI-54] - Implement new cellular Modem for EU
[MINI-55] - Implement new cellular Modem for AT&T NA***************************************************************************************************************
Version 2.2.5 (13.08.2021)
***************************************************************************************************************
V2.2.3:Bugfix
[MINI-56] - Hard coded WLAN SSID was shown, if no connection was possible
[MINI-58] - WiFi Channel expanded to 1 - 13
[MINI-59] - The input settings of I/O 1 and 2 wasn´t displayed correctly in the Quickstart
[MINI-60] - No WiFi connection if AP set to WPA/WPA2 and Encryption = AutomaticOptimization
[MINI-61] - More information on scanned WiFi APsV2.2.4:
Bug
[MINI-63] - VPN reconnect failed at times when testping failed
[MINI-64] - NTP service didn´t start under certain circumstancesOptimization
[MINI-65] - Debug logging optimized (LUA library messages removed)
[MINI-66] - Logging optimized by adding more information on DHCP processV2.2.5:
Bug
[MINI-67] - Occasionally so WiFi connection to iPhone hotspot and other various APs (No IP address via DHCP)
***************************************************************************************************************Version 2.2.2 (14.06.2021)
***************************************************************************************************************
Optimizations:
[MINI-52], [MINI-53] - Internal system adjustments for simply-connect integration
[MINI-49] - Internal system adjustmentsBugfixes:
[MINI-50] - Quickstart Web-GUI: Wrong display of open Ports Ports 80,443,1194
[MINI-40] - Identical USB-Ident on the USB host connection together with the built-in modemFeatures
[MINI-48] - Integration of Simply-Connect
[MINI-46] - mbCONNECT24 Serverlist update
[MINI-47] - DHCP DNS Servers is used before the DNS from settings. Priority change.
[MINI-43] - Update CI (Logo, Color)
[MINI-45] - Update WLAN application and Hardware compatibility
[MINI-44] - Status API without Login***************************************************************************************************************
Version 2.0.8 (30.04.2020)
***************************************************************************************************************
Bugfixes:
* [MINI-27] - MDH867 optimise Failover WAN/WLAN/GSM
* [MINI-32] - pppd Vulnerability CVE-2020-8597Features:
* [MINI-24] - optimise WLAN with setting: without internet monitoring
* [MINI-29] - Support für Telit Modem LE910NAG V2
* [MINI-34] - Optimise Failover switching time***************************************************************************************************************
Version 2.0.6 (18.11.2019)
***************************************************************************************************************
Bugfix:
[MINI-8] - [Support] BUGS-106 - Problem mit UMTS Modems***************************************************************************************************************
Version 2.0.4
***************************************************************************************************************
Bugfix:
[MINI-9] - Speichergrenze des Speicherbereich "Config" des Flashs wird erreichtFeature:
[MINI-5] - [Feature] FIMA-78 - Unique-Password Funktionalität bereitstellen
[MINI-7] - [Feature] FIMA-43 - Anzeige, wie mbNET verbunden ist (WAN, modem)
[MINI-10] - Abfrage HWVERSION und STAT_INET in communication.sh eingebaut***************************************************************************************************************
Version 2.0.3 (25.07.2019)
***************************************************************************************************************
Bugfix:
- [MINI-2] - fixed CTM with proxyAdd:
- #4046: new WIFI Modul support RALink 5370
***************************************************************************************************************Version 2.0.1 (11.04.2019)
****************************************************************************************************************
Bugfix:
#3953: Email sending was not working
#3957: Failover back from Modem to WAN was not working when Modem was initializing state
#3955: preset Modem connection regardless of configuration
***************************************************************************************************************Version 2.0.0 (01.04.2019)
****************************************************************************************************************
Security:
#3926 : Security update (openvpn, openssl, WEB logout)Bugfix:
#3933 : fix SearchoverIP with Beckhoff, Schneider, Pilz
#3401 : WLAN-Gateway was shown wrong at Quickstart page
#3387 : Fix PROFINET Communication between LAN-Port 4 and LAN-Port 1 to 3
#3339 : Forwarding rules were not deleted with new configuration
#3309 : Data24 download only when device is online
#3308 : wrong Firewall rule for USBOverIP when it was inactive
#3306 : fix kernel oops tty_buffer_request_room
#3295 : Firewall Forwarding: LAN IP's were accepted despite Firewall from WAN>LAN
#3234 : no access via SFTP to USB memory
#3160 : boot process tooks more than 10 minutes when WAN was static IP-Address and no cable plugged in
#2931 : improvement of failover and monitoring
#2828 : WLAN Encryption method was not taken over while setup thru Quickstart
#2781 : Memory overflow with Hardwareversion 0Feature:
#3929 : add SNAT for LAN to WAN
#3928 : add SimpleNAT
#3927 : add Selectable Interface for Firewallrules
#2868 : show MAC-Addresses on Quickstart page
#2717 : delete conntrack Filter each firewall reset
#2516 : add Ignore traffic setting for LAN and local Services
#3310 : Firmwareversion is also shown in syslog now***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Increased the GSM-timeout
#2828: Improved the WLAN firststart
#2840: Improved the re-connection of the devices
#2739: A text document with detailed information will be created after a configuration download to the device fails because of a wrong configuration fileImprovements:
#2680: Masquerading
#2717: Conntrack filter will be flushed after every firewall restart
#2750: Authentication method for proxy users added
SEARCHoverIP function implemented***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Timeout für GSM-Verbindung erhöht
#2828: Firststart Anpassung für WLAN
#2840: Anpassung des Wiederverbindungsaufbaus
#2739: Verhalten bei Fehlerhaften aufspielen der Konfiguration optimiertVerbesserung:
#2680: Masquerading
#2717: Firewall wird nach Neustart gelöscht
#2750: Authentifizierungsmethode beim Proxy Benutzername
SEARCHoverIP Funktion implementiert****************************************************************************************************************
Version 1.8.1 (07.07.2016)
****************************************************************************************************************
Bugfix:
major Bugfix regarding USBoverIP****************************************************************************************************************
Version 1.8.0 (30.06.2016)
****************************************************************************************************************
Bugfix:
#2357: after activating USBoverIP no configtransfer via USB possible
#2358: after activating USBoverIP USB was mounted for SFTP****************************************************************************************************************
Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: Anpassung des Quickstarts
#1914: Anpassungen beim ZeitabgleichVerbesserung:
USBoverIP funktion hinzugefügt
****************************************************************************************************************Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: improved the quickstart
#1914: improved the time-adjustingImprovements:
Included USBoverIP function
************************************************************************************************************************************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS Anzeige war Fehlerhaft
#2205: Übersetzungsfehler Deutsch <> Englisch
#2204: Befehle auf Diagnose Seite konnten nicht ausgeführt werden
#2171: Sicherheitslücke (CVE ID: CVE-1999-0524) geschlossen
#2207: Bei Fehlermeldung am Gerät wurde die falsche IP-Adresse angezeigtVerbesserung:
#2176: Allgemein: Diagnose Seite implementiert
********************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS information was not correct
#2205: Wrong translations German <> English
#2204: Commands on the Diagnostics page couldn´t be executed
#2171: Security vulnerability (CVE ID: CVE-1999-0524) fixed
#2207: After an error message on the device, the wrong IP address was shownImprovements:
#2176: General: Diagnostics page implemented
********************************************************************************************************************************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Verbindung wurde unter bestimmten Umständen selbstständig aufgebaut
#2127 VPN: Monitoring verhinderte Verbingsaufbau
#1660 VPN: VPN Verbindung bei Eingang 1 funktionierte nur sporadisch
#2130 Firewall: NAT Funktionlität optimiertVerbesserung:
Allgemein: Kompatibilität mit WLAN (MDH863) und LTE (MDH862) Geräten****************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Connection has been established in spite of "on demand"
#2127 VPN: Monitoring prevented VPN connection
#1660 VPN: built sporadically a VPN connection at input 1
#2130 Firewall: NAT functionality optimizedImprovements:
General: Compatibility with WiFi (MDH863) and LTE (MDH862) devices****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Anzeigefehler im Quickstart
#1658, #1825, #1525 Allgemein: Anpassen des blinkverhaltens der CON LED
#1436 VPN: SMS Befehl eingefügt
#1306 NTP: Anpassen der Uhrzeit bei deaktiviertem NTP
#1524 Modem: Unterbinden eines PPP Neustarts
#1899, #1837 VPN: Gerät kam nach Verbindungsabbau erneut online****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Displayerror at the Quickstart
#1658, #1825, #1525 Allgemein: Adjusting the CON LED blinking behavior
#1436 VPN: Inserted SMS command
#1306 NTP: Adjust the time if the NTP is disabled
#1524 Modem: Prevent PPP restarts
#1899, #1837 VPN: Device came back online after disconnection****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: Kein Verbindungsaufbau wenn Username bei APN leer
#989 VPN: VPN-Verbindung brach unter bestimmten Umständen ab
#1243 NTP: Keine Verbindung bei blockiertem NTP-Port
#1258 Allgemein: Das connection monitoring war nicht abschaltbarVerbesserungen:
#1117 Firewall: Anpassungen an der Firewall
#1233 Allgemein: Dienste gepatcht****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: No internetconnection if the APN username was empty
#989 VPN: VPN connection got lost in certain cases
#1243 NTP: No connection if NTP port was blocked
#1258 General: Connection monitoring wasn´t defeatableImprovements:
#1117 Firewall: Firewall improvements
#1233 General: Patched some services****************************************************************************************************************
Version 1.2.0 (28.11.2014)
****************************************************************************************************************
Bugfix:
#1021 CTM: Proxy server will be used as testserver whenever internetconnection is via external router (WAN)
#1014 CTM: CTM now uses only IPV4 DNS request
#1000 LAN: now supporting 10MBIT/s devices connected to LAN
#994 CTM: CTM ignored Proxy setting
#993 LAN: switch through Port 3 and 4 was not workingImprovements:
#1027 Web-GUI: Icon Step 3 is now signed as green whenever NTP service was not started before (NTP icon is gray)****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Category: Firmware mbNET.mini
Version: 1.1.2Bugfix:
#896 Modem: With SIM-cards from different providers (o2, E-Plus, Vodafone) the ISP hasn´t given a local IP address. In the logfile the error message "Could not determine local IP address" appeared, consequently the device couldn´t establish an internet connection. This has been fixed in this version.Improvements:
#891 General: Close a security gap
#856 Update: The firmware file will also be accepted in a <Firmwarename>_<Version>.sbs format****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Kategorie: Firmware mbNET.mini
Versionsnummer: 1.1.2Bugfix:
#896 Modem: Bei SIM-Karten von verschiedenen Providern (o2, E-Plus, Vodafone) wurde vom ISP keine lokale IP-Adresse vergeben. Im Logfile erschien die Fehlermeldung "Could not determine local IP address", infolgedessen konnte keine Internetverbindung hergestellt werden. Dies wurde in dieser Version behoben.Verbesserung:
#891 Allgemein: Schließen einer Sicherheitslücke
#856 Update: Die Firmwaredatei wird nun auch im Format <Firmwarename>_<Version>.sbs akzeptiert****************************************************************************************************************
Initial Firmwareversion: 1.1.1
****************************************************************************************************************REX 100, Firmware shDIALUP (Windows 7; Windows 8; Windows 10) 3.9.R0.5 69 MB History =============================================================
(shDIALUP) History of the Versions for router (700-87x-xxxxx)
=============================================================V 3.9.R0.5 08.07.2021
Changelogs:
[DIALUP-23] - [Bug: MB-828] Security fix
[DIALUP-24] - [Bug: MB-829] Security fix
Bugfix:
[DIALUP-8] - [Support] BUGS-130 - Zugriffsverletzung Dialup
[DIALUP-19] - [Test: DIALUP-10] [Support] BUGS-138 - shDIALUP friert ein nach Eingabe eines Benutzers ohne "@"
[DIALUP-20] - [Test: DIALUP-9] [Support] BUGS-132 - OpenVPN.log bei shDIALUP V3.9 R0.2 nicht vorhanden
[DIALUP-21] - [Test: DIALUP-11] [Support] BUGS-181 - addtap.bat verweist auf nicht vorhandene OemWin2k.inf
V 3.9.R0.1 08.08.2019
- new menu "Create Supportinformation" at Info-Button. All Logfiles will be packed in ZIP file
- new menu "Open Data Directory" at Info-Button.It opens the Explorer at your Data Directory File location.
- Check for Updates in INI disabled
- separate Appdata Installation path for all users or single user
- fix HTTP-Proxy connection. (use of OpenVPN 2.3.18 since 2.4.x has community confirmed issue with HTTP-Proxy)
load Chrome DLL libcef.dll from absolute installation path to not conflict with other installations.
- Bluescreen when accessing VCOM. Driver update from V7 to V9.
- new Chromium Version 74.0.3729.131 and CEF4 for internal browser improvements
- fix Auto-Login in shDIALUP
- fix OpenVPN 2.4.5 issue regarding auto-proxy
- Update TAP Driver 9.0.0.21 (Version 9.21.2)
- Default Setting "Override IE automatic proxy search settings" is now FALSE
- Freeze after "Connect after programstart (username and password must be specified in the serverlist)" if Username or Password was not given
- update integrated Browser with (CEF 3.3538.1848.g1d1fe01 which includes Chromium 70.0.3538.77)
- corrected some typos on settings page
- if there was a "." in the device name while configuring through network, the transfer failed. Now "." are allowed.
- Sometimes an error occured while downloading configration file to the computer
- Sometimes software freezed after Exit
- corrected typo in installation routine
- If "conftool" option was disabled, the configuration process through network didn't finished
- add check for updates function at menu "info"
- Funktion to check for updates added. See Icon "Info" and submenu "Check for updates"
- TLS Cipher given to OpenVPN configuration
- auto-logout from Server when exiting shDIALUP
- The option "Override IE" is now default = FALSE
V 3.7.R1.0 03.02.2017
- shDIALUP freezes after uploading a file
- "I forgot my password" function has been reactivated
- When using the V1 portal, the disconnection did not work properly
- No error message when starting the software
- When closing, an error came up sporadically
- Display error when a dropdown menu is opened and the shDIALUP window is moved fixed
- Sporadically VPN authentification error fixed
- SEARCHoverIP function integrated
V 3.6.R0.0 30.09.2016
- In addition to the server selection V1 also the address of Portal V2 is now selectable
- official release for Win 10
- Error Message when Username is wrong is now in more detail
- Login for Google Auth possible
- Integrate USB-over-IP Function
V3.4 R0.0 13.05.2015
- A second start of the software will now be prevented
- It is now possible to refresh the user interface by clicking the F5 button
- enhance the error message when the installer detects a second instance of shDIALUP
- disbale plugins for the integrated browser to prevent from Adware
- Fix error with white or black screens after login or starting of shDIALUP
- Check the availibility of the TAP-Windows Adapter V9
- Automatic Proxy Settings search could now be disabled
- Proxy settings of the IE were overwritten
V3.1 R0.0 25.07.2014
- The module VCOM LAN2 has been integrated - the virtual COM ports are automatically searched for and assigned
- A newer version of Chromium browser is in use (CeF3)
- Scan and configuring devices directly via LAN is possible now
- Supports Windows 8 32/64
- Automatic discovery of proxy server in the Internet Explorer is now suppressed, so that the loading time of shDIALUP is faster.V2.0 R0.8 25.11.2013
- DNS connection name changed because of performance and connection problemsV2.0 R0.6 01.07.2013
- Integrated Browser improovments
- ini Files will no longer deleted at software updateV2.0 R0.2 13.02.2013
- Troubleshooting: Sporadic re-display of login box after dial-in
- Troubleshooting: Proxy settings are not applied
- Troubleshooting: Termination after login with incorrect login information is now displayed with an error message
- Improvment: Menu buttons located in the network information dialog removedV2.0 R0.1 01.02.2013
- Complete GUI rebuild for better usability
- Some improvements under Windows 7V1.1 R0.5 02.05.2011
- improvement for additional proxy server connections
- OK button text changed to "Go back to taskbar"
- direct connection init after program start can now be activated in the settings menuV1.1 R0.4 07.12.2010
- improvement for proxy server connectionsV1.1 R0.2 02.11.2010
- 1st release - REX 100 Ethernet Router700-875-UMT01REX 100 3G, 4 x LAN (switch)/1 x 3G modem (UMTS)
REX 100, Firmware 2.2.11 14 MB History Version 2.2.11 (07.04.2022)
***************************************************************************************************************
Bugfix
[MINI-75] - Cellular connections didn´t work while using connect on demand (digital input or Function button)***************************************************************************************************************
Version 2.2.10 (14.03.2022)
***************************************************************************************************************
Optimization
[MINI-74] - DNS-Server negotiation with mobile service provider optimized
[MINI-73] - (2.2.9) Increase timeout for cellular network-test***************************************************************************************************************
Version 2.2.8 (08.12.2021)
***************************************************************************************************************
Bugfix
[MINI-71] - DNS server entries were in wrong order
[MINI-72] - Old assigned DNS server from DHCP weren´t deleted***************************************************************************************************************
Version 2.2.7 (02.09.2021)
***************************************************************************************************************
Bugfix
[MINI-68] - [Bug: MB-897] VPN connection problem after factory reset and configuration
[MINI-69] - [Bug: MB-899] Occasional connection loss of cellular connection which won´t reconnectOptimization
[MINI-54] - Implement new cellular Modem for EU
[MINI-55] - Implement new cellular Modem for AT&T NA***************************************************************************************************************
Version 2.2.5 (13.08.2021)
***************************************************************************************************************
V2.2.3:Bugfix
[MINI-56] - Hard coded WLAN SSID was shown, if no connection was possible
[MINI-58] - WiFi Channel expanded to 1 - 13
[MINI-59] - The input settings of I/O 1 and 2 wasn´t displayed correctly in the Quickstart
[MINI-60] - No WiFi connection if AP set to WPA/WPA2 and Encryption = AutomaticOptimization
[MINI-61] - More information on scanned WiFi APsV2.2.4:
Bug
[MINI-63] - VPN reconnect failed at times when testping failed
[MINI-64] - NTP service didn´t start under certain circumstancesOptimization
[MINI-65] - Debug logging optimized (LUA library messages removed)
[MINI-66] - Logging optimized by adding more information on DHCP processV2.2.5:
Bug
[MINI-67] - Occasionally so WiFi connection to iPhone hotspot and other various APs (No IP address via DHCP)
***************************************************************************************************************Version 2.2.2 (14.06.2021)
***************************************************************************************************************
Optimizations:
[MINI-52], [MINI-53] - Internal system adjustments for simply-connect integration
[MINI-49] - Internal system adjustmentsBugfixes:
[MINI-50] - Quickstart Web-GUI: Wrong display of open Ports Ports 80,443,1194
[MINI-40] - Identical USB-Ident on the USB host connection together with the built-in modemFeatures
[MINI-48] - Integration of Simply-Connect
[MINI-46] - mbCONNECT24 Serverlist update
[MINI-47] - DHCP DNS Servers is used before the DNS from settings. Priority change.
[MINI-43] - Update CI (Logo, Color)
[MINI-45] - Update WLAN application and Hardware compatibility
[MINI-44] - Status API without Login***************************************************************************************************************
Version 2.0.8 (30.04.2020)
***************************************************************************************************************
Bugfixes:
* [MINI-27] - MDH867 optimise Failover WAN/WLAN/GSM
* [MINI-32] - pppd Vulnerability CVE-2020-8597Features:
* [MINI-24] - optimise WLAN with setting: without internet monitoring
* [MINI-29] - Support für Telit Modem LE910NAG V2
* [MINI-34] - Optimise Failover switching time***************************************************************************************************************
Version 2.0.6 (18.11.2019)
***************************************************************************************************************
Bugfix:
[MINI-8] - [Support] BUGS-106 - Problem mit UMTS Modems***************************************************************************************************************
Version 2.0.4
***************************************************************************************************************
Bugfix:
[MINI-9] - Speichergrenze des Speicherbereich "Config" des Flashs wird erreichtFeature:
[MINI-5] - [Feature] FIMA-78 - Unique-Password Funktionalität bereitstellen
[MINI-7] - [Feature] FIMA-43 - Anzeige, wie mbNET verbunden ist (WAN, modem)
[MINI-10] - Abfrage HWVERSION und STAT_INET in communication.sh eingebaut***************************************************************************************************************
Version 2.0.3 (25.07.2019)
***************************************************************************************************************
Bugfix:
- [MINI-2] - fixed CTM with proxyAdd:
- #4046: new WIFI Modul support RALink 5370
***************************************************************************************************************Version 2.0.1 (11.04.2019)
****************************************************************************************************************
Bugfix:
#3953: Email sending was not working
#3957: Failover back from Modem to WAN was not working when Modem was initializing state
#3955: preset Modem connection regardless of configuration
***************************************************************************************************************Version 2.0.0 (01.04.2019)
****************************************************************************************************************
Security:
#3926 : Security update (openvpn, openssl, WEB logout)Bugfix:
#3933 : fix SearchoverIP with Beckhoff, Schneider, Pilz
#3401 : WLAN-Gateway was shown wrong at Quickstart page
#3387 : Fix PROFINET Communication between LAN-Port 4 and LAN-Port 1 to 3
#3339 : Forwarding rules were not deleted with new configuration
#3309 : Data24 download only when device is online
#3308 : wrong Firewall rule for USBOverIP when it was inactive
#3306 : fix kernel oops tty_buffer_request_room
#3295 : Firewall Forwarding: LAN IP's were accepted despite Firewall from WAN>LAN
#3234 : no access via SFTP to USB memory
#3160 : boot process tooks more than 10 minutes when WAN was static IP-Address and no cable plugged in
#2931 : improvement of failover and monitoring
#2828 : WLAN Encryption method was not taken over while setup thru Quickstart
#2781 : Memory overflow with Hardwareversion 0Feature:
#3929 : add SNAT for LAN to WAN
#3928 : add SimpleNAT
#3927 : add Selectable Interface for Firewallrules
#2868 : show MAC-Addresses on Quickstart page
#2717 : delete conntrack Filter each firewall reset
#2516 : add Ignore traffic setting for LAN and local Services
#3310 : Firmwareversion is also shown in syslog now***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Increased the GSM-timeout
#2828: Improved the WLAN firststart
#2840: Improved the re-connection of the devices
#2739: A text document with detailed information will be created after a configuration download to the device fails because of a wrong configuration fileImprovements:
#2680: Masquerading
#2717: Conntrack filter will be flushed after every firewall restart
#2750: Authentication method for proxy users added
SEARCHoverIP function implemented***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Timeout für GSM-Verbindung erhöht
#2828: Firststart Anpassung für WLAN
#2840: Anpassung des Wiederverbindungsaufbaus
#2739: Verhalten bei Fehlerhaften aufspielen der Konfiguration optimiertVerbesserung:
#2680: Masquerading
#2717: Firewall wird nach Neustart gelöscht
#2750: Authentifizierungsmethode beim Proxy Benutzername
SEARCHoverIP Funktion implementiert****************************************************************************************************************
Version 1.8.1 (07.07.2016)
****************************************************************************************************************
Bugfix:
major Bugfix regarding USBoverIP****************************************************************************************************************
Version 1.8.0 (30.06.2016)
****************************************************************************************************************
Bugfix:
#2357: after activating USBoverIP no configtransfer via USB possible
#2358: after activating USBoverIP USB was mounted for SFTP****************************************************************************************************************
Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: Anpassung des Quickstarts
#1914: Anpassungen beim ZeitabgleichVerbesserung:
USBoverIP funktion hinzugefügt
****************************************************************************************************************Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: improved the quickstart
#1914: improved the time-adjustingImprovements:
Included USBoverIP function
************************************************************************************************************************************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS Anzeige war Fehlerhaft
#2205: Übersetzungsfehler Deutsch <> Englisch
#2204: Befehle auf Diagnose Seite konnten nicht ausgeführt werden
#2171: Sicherheitslücke (CVE ID: CVE-1999-0524) geschlossen
#2207: Bei Fehlermeldung am Gerät wurde die falsche IP-Adresse angezeigtVerbesserung:
#2176: Allgemein: Diagnose Seite implementiert
********************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS information was not correct
#2205: Wrong translations German <> English
#2204: Commands on the Diagnostics page couldn´t be executed
#2171: Security vulnerability (CVE ID: CVE-1999-0524) fixed
#2207: After an error message on the device, the wrong IP address was shownImprovements:
#2176: General: Diagnostics page implemented
********************************************************************************************************************************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Verbindung wurde unter bestimmten Umständen selbstständig aufgebaut
#2127 VPN: Monitoring verhinderte Verbingsaufbau
#1660 VPN: VPN Verbindung bei Eingang 1 funktionierte nur sporadisch
#2130 Firewall: NAT Funktionlität optimiertVerbesserung:
Allgemein: Kompatibilität mit WLAN (MDH863) und LTE (MDH862) Geräten****************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Connection has been established in spite of "on demand"
#2127 VPN: Monitoring prevented VPN connection
#1660 VPN: built sporadically a VPN connection at input 1
#2130 Firewall: NAT functionality optimizedImprovements:
General: Compatibility with WiFi (MDH863) and LTE (MDH862) devices****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Anzeigefehler im Quickstart
#1658, #1825, #1525 Allgemein: Anpassen des blinkverhaltens der CON LED
#1436 VPN: SMS Befehl eingefügt
#1306 NTP: Anpassen der Uhrzeit bei deaktiviertem NTP
#1524 Modem: Unterbinden eines PPP Neustarts
#1899, #1837 VPN: Gerät kam nach Verbindungsabbau erneut online****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Displayerror at the Quickstart
#1658, #1825, #1525 Allgemein: Adjusting the CON LED blinking behavior
#1436 VPN: Inserted SMS command
#1306 NTP: Adjust the time if the NTP is disabled
#1524 Modem: Prevent PPP restarts
#1899, #1837 VPN: Device came back online after disconnection****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: Kein Verbindungsaufbau wenn Username bei APN leer
#989 VPN: VPN-Verbindung brach unter bestimmten Umständen ab
#1243 NTP: Keine Verbindung bei blockiertem NTP-Port
#1258 Allgemein: Das connection monitoring war nicht abschaltbarVerbesserungen:
#1117 Firewall: Anpassungen an der Firewall
#1233 Allgemein: Dienste gepatcht****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: No internetconnection if the APN username was empty
#989 VPN: VPN connection got lost in certain cases
#1243 NTP: No connection if NTP port was blocked
#1258 General: Connection monitoring wasn´t defeatableImprovements:
#1117 Firewall: Firewall improvements
#1233 General: Patched some services****************************************************************************************************************
Version 1.2.0 (28.11.2014)
****************************************************************************************************************
Bugfix:
#1021 CTM: Proxy server will be used as testserver whenever internetconnection is via external router (WAN)
#1014 CTM: CTM now uses only IPV4 DNS request
#1000 LAN: now supporting 10MBIT/s devices connected to LAN
#994 CTM: CTM ignored Proxy setting
#993 LAN: switch through Port 3 and 4 was not workingImprovements:
#1027 Web-GUI: Icon Step 3 is now signed as green whenever NTP service was not started before (NTP icon is gray)****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Category: Firmware mbNET.mini
Version: 1.1.2Bugfix:
#896 Modem: With SIM-cards from different providers (o2, E-Plus, Vodafone) the ISP hasn´t given a local IP address. In the logfile the error message "Could not determine local IP address" appeared, consequently the device couldn´t establish an internet connection. This has been fixed in this version.Improvements:
#891 General: Close a security gap
#856 Update: The firmware file will also be accepted in a <Firmwarename>_<Version>.sbs format****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Kategorie: Firmware mbNET.mini
Versionsnummer: 1.1.2Bugfix:
#896 Modem: Bei SIM-Karten von verschiedenen Providern (o2, E-Plus, Vodafone) wurde vom ISP keine lokale IP-Adresse vergeben. Im Logfile erschien die Fehlermeldung "Could not determine local IP address", infolgedessen konnte keine Internetverbindung hergestellt werden. Dies wurde in dieser Version behoben.Verbesserung:
#891 Allgemein: Schließen einer Sicherheitslücke
#856 Update: Die Firmwaredatei wird nun auch im Format <Firmwarename>_<Version>.sbs akzeptiert****************************************************************************************************************
Initial Firmwareversion: 1.1.1
****************************************************************************************************************REX 100, Firmware shDIALUP (Windows 7; Windows 8; Windows 10) 3.9.R0.5 69 MB History =============================================================
(shDIALUP) History of the Versions for router (700-87x-xxxxx)
=============================================================V 3.9.R0.5 08.07.2021
Changelogs:
[DIALUP-23] - [Bug: MB-828] Security fix
[DIALUP-24] - [Bug: MB-829] Security fix
Bugfix:
[DIALUP-8] - [Support] BUGS-130 - Zugriffsverletzung Dialup
[DIALUP-19] - [Test: DIALUP-10] [Support] BUGS-138 - shDIALUP friert ein nach Eingabe eines Benutzers ohne "@"
[DIALUP-20] - [Test: DIALUP-9] [Support] BUGS-132 - OpenVPN.log bei shDIALUP V3.9 R0.2 nicht vorhanden
[DIALUP-21] - [Test: DIALUP-11] [Support] BUGS-181 - addtap.bat verweist auf nicht vorhandene OemWin2k.inf
V 3.9.R0.1 08.08.2019
- new menu "Create Supportinformation" at Info-Button. All Logfiles will be packed in ZIP file
- new menu "Open Data Directory" at Info-Button.It opens the Explorer at your Data Directory File location.
- Check for Updates in INI disabled
- separate Appdata Installation path for all users or single user
- fix HTTP-Proxy connection. (use of OpenVPN 2.3.18 since 2.4.x has community confirmed issue with HTTP-Proxy)
load Chrome DLL libcef.dll from absolute installation path to not conflict with other installations.
- Bluescreen when accessing VCOM. Driver update from V7 to V9.
- new Chromium Version 74.0.3729.131 and CEF4 for internal browser improvements
- fix Auto-Login in shDIALUP
- fix OpenVPN 2.4.5 issue regarding auto-proxy
- Update TAP Driver 9.0.0.21 (Version 9.21.2)
- Default Setting "Override IE automatic proxy search settings" is now FALSE
- Freeze after "Connect after programstart (username and password must be specified in the serverlist)" if Username or Password was not given
- update integrated Browser with (CEF 3.3538.1848.g1d1fe01 which includes Chromium 70.0.3538.77)
- corrected some typos on settings page
- if there was a "." in the device name while configuring through network, the transfer failed. Now "." are allowed.
- Sometimes an error occured while downloading configration file to the computer
- Sometimes software freezed after Exit
- corrected typo in installation routine
- If "conftool" option was disabled, the configuration process through network didn't finished
- add check for updates function at menu "info"
- Funktion to check for updates added. See Icon "Info" and submenu "Check for updates"
- TLS Cipher given to OpenVPN configuration
- auto-logout from Server when exiting shDIALUP
- The option "Override IE" is now default = FALSE
V 3.7.R1.0 03.02.2017
- shDIALUP freezes after uploading a file
- "I forgot my password" function has been reactivated
- When using the V1 portal, the disconnection did not work properly
- No error message when starting the software
- When closing, an error came up sporadically
- Display error when a dropdown menu is opened and the shDIALUP window is moved fixed
- Sporadically VPN authentification error fixed
- SEARCHoverIP function integrated
V 3.6.R0.0 30.09.2016
- In addition to the server selection V1 also the address of Portal V2 is now selectable
- official release for Win 10
- Error Message when Username is wrong is now in more detail
- Login for Google Auth possible
- Integrate USB-over-IP Function
V3.4 R0.0 13.05.2015
- A second start of the software will now be prevented
- It is now possible to refresh the user interface by clicking the F5 button
- enhance the error message when the installer detects a second instance of shDIALUP
- disbale plugins for the integrated browser to prevent from Adware
- Fix error with white or black screens after login or starting of shDIALUP
- Check the availibility of the TAP-Windows Adapter V9
- Automatic Proxy Settings search could now be disabled
- Proxy settings of the IE were overwritten
V3.1 R0.0 25.07.2014
- The module VCOM LAN2 has been integrated - the virtual COM ports are automatically searched for and assigned
- A newer version of Chromium browser is in use (CeF3)
- Scan and configuring devices directly via LAN is possible now
- Supports Windows 8 32/64
- Automatic discovery of proxy server in the Internet Explorer is now suppressed, so that the loading time of shDIALUP is faster.V2.0 R0.8 25.11.2013
- DNS connection name changed because of performance and connection problemsV2.0 R0.6 01.07.2013
- Integrated Browser improovments
- ini Files will no longer deleted at software updateV2.0 R0.2 13.02.2013
- Troubleshooting: Sporadic re-display of login box after dial-in
- Troubleshooting: Proxy settings are not applied
- Troubleshooting: Termination after login with incorrect login information is now displayed with an error message
- Improvment: Menu buttons located in the network information dialog removedV2.0 R0.1 01.02.2013
- Complete GUI rebuild for better usability
- Some improvements under Windows 7V1.1 R0.5 02.05.2011
- improvement for additional proxy server connections
- OK button text changed to "Go back to taskbar"
- direct connection init after program start can now be activated in the settings menuV1.1 R0.4 07.12.2010
- improvement for proxy server connectionsV1.1 R0.2 02.11.2010
- 1st release - REX 100 Ethernet Router700-875-LTE01REX 100 LTE, 4 x LAN (switch)/1 x LTE modem (EU- & Asia-Version)
REX 100, Firmware 2.2.11 14 MB History Version 2.2.11 (07.04.2022)
***************************************************************************************************************
Bugfix
[MINI-75] - Cellular connections didn´t work while using connect on demand (digital input or Function button)***************************************************************************************************************
Version 2.2.10 (14.03.2022)
***************************************************************************************************************
Optimization
[MINI-74] - DNS-Server negotiation with mobile service provider optimized
[MINI-73] - (2.2.9) Increase timeout for cellular network-test***************************************************************************************************************
Version 2.2.8 (08.12.2021)
***************************************************************************************************************
Bugfix
[MINI-71] - DNS server entries were in wrong order
[MINI-72] - Old assigned DNS server from DHCP weren´t deleted***************************************************************************************************************
Version 2.2.7 (02.09.2021)
***************************************************************************************************************
Bugfix
[MINI-68] - [Bug: MB-897] VPN connection problem after factory reset and configuration
[MINI-69] - [Bug: MB-899] Occasional connection loss of cellular connection which won´t reconnectOptimization
[MINI-54] - Implement new cellular Modem for EU
[MINI-55] - Implement new cellular Modem for AT&T NA***************************************************************************************************************
Version 2.2.5 (13.08.2021)
***************************************************************************************************************
V2.2.3:Bugfix
[MINI-56] - Hard coded WLAN SSID was shown, if no connection was possible
[MINI-58] - WiFi Channel expanded to 1 - 13
[MINI-59] - The input settings of I/O 1 and 2 wasn´t displayed correctly in the Quickstart
[MINI-60] - No WiFi connection if AP set to WPA/WPA2 and Encryption = AutomaticOptimization
[MINI-61] - More information on scanned WiFi APsV2.2.4:
Bug
[MINI-63] - VPN reconnect failed at times when testping failed
[MINI-64] - NTP service didn´t start under certain circumstancesOptimization
[MINI-65] - Debug logging optimized (LUA library messages removed)
[MINI-66] - Logging optimized by adding more information on DHCP processV2.2.5:
Bug
[MINI-67] - Occasionally so WiFi connection to iPhone hotspot and other various APs (No IP address via DHCP)
***************************************************************************************************************Version 2.2.2 (14.06.2021)
***************************************************************************************************************
Optimizations:
[MINI-52], [MINI-53] - Internal system adjustments for simply-connect integration
[MINI-49] - Internal system adjustmentsBugfixes:
[MINI-50] - Quickstart Web-GUI: Wrong display of open Ports Ports 80,443,1194
[MINI-40] - Identical USB-Ident on the USB host connection together with the built-in modemFeatures
[MINI-48] - Integration of Simply-Connect
[MINI-46] - mbCONNECT24 Serverlist update
[MINI-47] - DHCP DNS Servers is used before the DNS from settings. Priority change.
[MINI-43] - Update CI (Logo, Color)
[MINI-45] - Update WLAN application and Hardware compatibility
[MINI-44] - Status API without Login***************************************************************************************************************
Version 2.0.8 (30.04.2020)
***************************************************************************************************************
Bugfixes:
* [MINI-27] - MDH867 optimise Failover WAN/WLAN/GSM
* [MINI-32] - pppd Vulnerability CVE-2020-8597Features:
* [MINI-24] - optimise WLAN with setting: without internet monitoring
* [MINI-29] - Support für Telit Modem LE910NAG V2
* [MINI-34] - Optimise Failover switching time***************************************************************************************************************
Version 2.0.6 (18.11.2019)
***************************************************************************************************************
Bugfix:
[MINI-8] - [Support] BUGS-106 - Problem mit UMTS Modems***************************************************************************************************************
Version 2.0.4
***************************************************************************************************************
Bugfix:
[MINI-9] - Speichergrenze des Speicherbereich "Config" des Flashs wird erreichtFeature:
[MINI-5] - [Feature] FIMA-78 - Unique-Password Funktionalität bereitstellen
[MINI-7] - [Feature] FIMA-43 - Anzeige, wie mbNET verbunden ist (WAN, modem)
[MINI-10] - Abfrage HWVERSION und STAT_INET in communication.sh eingebaut***************************************************************************************************************
Version 2.0.3 (25.07.2019)
***************************************************************************************************************
Bugfix:
- [MINI-2] - fixed CTM with proxyAdd:
- #4046: new WIFI Modul support RALink 5370
***************************************************************************************************************Version 2.0.1 (11.04.2019)
****************************************************************************************************************
Bugfix:
#3953: Email sending was not working
#3957: Failover back from Modem to WAN was not working when Modem was initializing state
#3955: preset Modem connection regardless of configuration
***************************************************************************************************************Version 2.0.0 (01.04.2019)
****************************************************************************************************************
Security:
#3926 : Security update (openvpn, openssl, WEB logout)Bugfix:
#3933 : fix SearchoverIP with Beckhoff, Schneider, Pilz
#3401 : WLAN-Gateway was shown wrong at Quickstart page
#3387 : Fix PROFINET Communication between LAN-Port 4 and LAN-Port 1 to 3
#3339 : Forwarding rules were not deleted with new configuration
#3309 : Data24 download only when device is online
#3308 : wrong Firewall rule for USBOverIP when it was inactive
#3306 : fix kernel oops tty_buffer_request_room
#3295 : Firewall Forwarding: LAN IP's were accepted despite Firewall from WAN>LAN
#3234 : no access via SFTP to USB memory
#3160 : boot process tooks more than 10 minutes when WAN was static IP-Address and no cable plugged in
#2931 : improvement of failover and monitoring
#2828 : WLAN Encryption method was not taken over while setup thru Quickstart
#2781 : Memory overflow with Hardwareversion 0Feature:
#3929 : add SNAT for LAN to WAN
#3928 : add SimpleNAT
#3927 : add Selectable Interface for Firewallrules
#2868 : show MAC-Addresses on Quickstart page
#2717 : delete conntrack Filter each firewall reset
#2516 : add Ignore traffic setting for LAN and local Services
#3310 : Firmwareversion is also shown in syslog now***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Increased the GSM-timeout
#2828: Improved the WLAN firststart
#2840: Improved the re-connection of the devices
#2739: A text document with detailed information will be created after a configuration download to the device fails because of a wrong configuration fileImprovements:
#2680: Masquerading
#2717: Conntrack filter will be flushed after every firewall restart
#2750: Authentication method for proxy users added
SEARCHoverIP function implemented***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Timeout für GSM-Verbindung erhöht
#2828: Firststart Anpassung für WLAN
#2840: Anpassung des Wiederverbindungsaufbaus
#2739: Verhalten bei Fehlerhaften aufspielen der Konfiguration optimiertVerbesserung:
#2680: Masquerading
#2717: Firewall wird nach Neustart gelöscht
#2750: Authentifizierungsmethode beim Proxy Benutzername
SEARCHoverIP Funktion implementiert****************************************************************************************************************
Version 1.8.1 (07.07.2016)
****************************************************************************************************************
Bugfix:
major Bugfix regarding USBoverIP****************************************************************************************************************
Version 1.8.0 (30.06.2016)
****************************************************************************************************************
Bugfix:
#2357: after activating USBoverIP no configtransfer via USB possible
#2358: after activating USBoverIP USB was mounted for SFTP****************************************************************************************************************
Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: Anpassung des Quickstarts
#1914: Anpassungen beim ZeitabgleichVerbesserung:
USBoverIP funktion hinzugefügt
****************************************************************************************************************Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: improved the quickstart
#1914: improved the time-adjustingImprovements:
Included USBoverIP function
************************************************************************************************************************************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS Anzeige war Fehlerhaft
#2205: Übersetzungsfehler Deutsch <> Englisch
#2204: Befehle auf Diagnose Seite konnten nicht ausgeführt werden
#2171: Sicherheitslücke (CVE ID: CVE-1999-0524) geschlossen
#2207: Bei Fehlermeldung am Gerät wurde die falsche IP-Adresse angezeigtVerbesserung:
#2176: Allgemein: Diagnose Seite implementiert
********************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS information was not correct
#2205: Wrong translations German <> English
#2204: Commands on the Diagnostics page couldn´t be executed
#2171: Security vulnerability (CVE ID: CVE-1999-0524) fixed
#2207: After an error message on the device, the wrong IP address was shownImprovements:
#2176: General: Diagnostics page implemented
********************************************************************************************************************************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Verbindung wurde unter bestimmten Umständen selbstständig aufgebaut
#2127 VPN: Monitoring verhinderte Verbingsaufbau
#1660 VPN: VPN Verbindung bei Eingang 1 funktionierte nur sporadisch
#2130 Firewall: NAT Funktionlität optimiertVerbesserung:
Allgemein: Kompatibilität mit WLAN (MDH863) und LTE (MDH862) Geräten****************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Connection has been established in spite of "on demand"
#2127 VPN: Monitoring prevented VPN connection
#1660 VPN: built sporadically a VPN connection at input 1
#2130 Firewall: NAT functionality optimizedImprovements:
General: Compatibility with WiFi (MDH863) and LTE (MDH862) devices****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Anzeigefehler im Quickstart
#1658, #1825, #1525 Allgemein: Anpassen des blinkverhaltens der CON LED
#1436 VPN: SMS Befehl eingefügt
#1306 NTP: Anpassen der Uhrzeit bei deaktiviertem NTP
#1524 Modem: Unterbinden eines PPP Neustarts
#1899, #1837 VPN: Gerät kam nach Verbindungsabbau erneut online****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Displayerror at the Quickstart
#1658, #1825, #1525 Allgemein: Adjusting the CON LED blinking behavior
#1436 VPN: Inserted SMS command
#1306 NTP: Adjust the time if the NTP is disabled
#1524 Modem: Prevent PPP restarts
#1899, #1837 VPN: Device came back online after disconnection****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: Kein Verbindungsaufbau wenn Username bei APN leer
#989 VPN: VPN-Verbindung brach unter bestimmten Umständen ab
#1243 NTP: Keine Verbindung bei blockiertem NTP-Port
#1258 Allgemein: Das connection monitoring war nicht abschaltbarVerbesserungen:
#1117 Firewall: Anpassungen an der Firewall
#1233 Allgemein: Dienste gepatcht****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: No internetconnection if the APN username was empty
#989 VPN: VPN connection got lost in certain cases
#1243 NTP: No connection if NTP port was blocked
#1258 General: Connection monitoring wasn´t defeatableImprovements:
#1117 Firewall: Firewall improvements
#1233 General: Patched some services****************************************************************************************************************
Version 1.2.0 (28.11.2014)
****************************************************************************************************************
Bugfix:
#1021 CTM: Proxy server will be used as testserver whenever internetconnection is via external router (WAN)
#1014 CTM: CTM now uses only IPV4 DNS request
#1000 LAN: now supporting 10MBIT/s devices connected to LAN
#994 CTM: CTM ignored Proxy setting
#993 LAN: switch through Port 3 and 4 was not workingImprovements:
#1027 Web-GUI: Icon Step 3 is now signed as green whenever NTP service was not started before (NTP icon is gray)****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Category: Firmware mbNET.mini
Version: 1.1.2Bugfix:
#896 Modem: With SIM-cards from different providers (o2, E-Plus, Vodafone) the ISP hasn´t given a local IP address. In the logfile the error message "Could not determine local IP address" appeared, consequently the device couldn´t establish an internet connection. This has been fixed in this version.Improvements:
#891 General: Close a security gap
#856 Update: The firmware file will also be accepted in a <Firmwarename>_<Version>.sbs format****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Kategorie: Firmware mbNET.mini
Versionsnummer: 1.1.2Bugfix:
#896 Modem: Bei SIM-Karten von verschiedenen Providern (o2, E-Plus, Vodafone) wurde vom ISP keine lokale IP-Adresse vergeben. Im Logfile erschien die Fehlermeldung "Could not determine local IP address", infolgedessen konnte keine Internetverbindung hergestellt werden. Dies wurde in dieser Version behoben.Verbesserung:
#891 Allgemein: Schließen einer Sicherheitslücke
#856 Update: Die Firmwaredatei wird nun auch im Format <Firmwarename>_<Version>.sbs akzeptiert****************************************************************************************************************
Initial Firmwareversion: 1.1.1
****************************************************************************************************************REX 100, Firmware shDIALUP (Windows 7; Windows 8; Windows 10) 3.9.R0.5 69 MB History =============================================================
(shDIALUP) History of the Versions for router (700-87x-xxxxx)
=============================================================V 3.9.R0.5 08.07.2021
Changelogs:
[DIALUP-23] - [Bug: MB-828] Security fix
[DIALUP-24] - [Bug: MB-829] Security fix
Bugfix:
[DIALUP-8] - [Support] BUGS-130 - Zugriffsverletzung Dialup
[DIALUP-19] - [Test: DIALUP-10] [Support] BUGS-138 - shDIALUP friert ein nach Eingabe eines Benutzers ohne "@"
[DIALUP-20] - [Test: DIALUP-9] [Support] BUGS-132 - OpenVPN.log bei shDIALUP V3.9 R0.2 nicht vorhanden
[DIALUP-21] - [Test: DIALUP-11] [Support] BUGS-181 - addtap.bat verweist auf nicht vorhandene OemWin2k.inf
V 3.9.R0.1 08.08.2019
- new menu "Create Supportinformation" at Info-Button. All Logfiles will be packed in ZIP file
- new menu "Open Data Directory" at Info-Button.It opens the Explorer at your Data Directory File location.
- Check for Updates in INI disabled
- separate Appdata Installation path for all users or single user
- fix HTTP-Proxy connection. (use of OpenVPN 2.3.18 since 2.4.x has community confirmed issue with HTTP-Proxy)
load Chrome DLL libcef.dll from absolute installation path to not conflict with other installations.
- Bluescreen when accessing VCOM. Driver update from V7 to V9.
- new Chromium Version 74.0.3729.131 and CEF4 for internal browser improvements
- fix Auto-Login in shDIALUP
- fix OpenVPN 2.4.5 issue regarding auto-proxy
- Update TAP Driver 9.0.0.21 (Version 9.21.2)
- Default Setting "Override IE automatic proxy search settings" is now FALSE
- Freeze after "Connect after programstart (username and password must be specified in the serverlist)" if Username or Password was not given
- update integrated Browser with (CEF 3.3538.1848.g1d1fe01 which includes Chromium 70.0.3538.77)
- corrected some typos on settings page
- if there was a "." in the device name while configuring through network, the transfer failed. Now "." are allowed.
- Sometimes an error occured while downloading configration file to the computer
- Sometimes software freezed after Exit
- corrected typo in installation routine
- If "conftool" option was disabled, the configuration process through network didn't finished
- add check for updates function at menu "info"
- Funktion to check for updates added. See Icon "Info" and submenu "Check for updates"
- TLS Cipher given to OpenVPN configuration
- auto-logout from Server when exiting shDIALUP
- The option "Override IE" is now default = FALSE
V 3.7.R1.0 03.02.2017
- shDIALUP freezes after uploading a file
- "I forgot my password" function has been reactivated
- When using the V1 portal, the disconnection did not work properly
- No error message when starting the software
- When closing, an error came up sporadically
- Display error when a dropdown menu is opened and the shDIALUP window is moved fixed
- Sporadically VPN authentification error fixed
- SEARCHoverIP function integrated
V 3.6.R0.0 30.09.2016
- In addition to the server selection V1 also the address of Portal V2 is now selectable
- official release for Win 10
- Error Message when Username is wrong is now in more detail
- Login for Google Auth possible
- Integrate USB-over-IP Function
V3.4 R0.0 13.05.2015
- A second start of the software will now be prevented
- It is now possible to refresh the user interface by clicking the F5 button
- enhance the error message when the installer detects a second instance of shDIALUP
- disbale plugins for the integrated browser to prevent from Adware
- Fix error with white or black screens after login or starting of shDIALUP
- Check the availibility of the TAP-Windows Adapter V9
- Automatic Proxy Settings search could now be disabled
- Proxy settings of the IE were overwritten
V3.1 R0.0 25.07.2014
- The module VCOM LAN2 has been integrated - the virtual COM ports are automatically searched for and assigned
- A newer version of Chromium browser is in use (CeF3)
- Scan and configuring devices directly via LAN is possible now
- Supports Windows 8 32/64
- Automatic discovery of proxy server in the Internet Explorer is now suppressed, so that the loading time of shDIALUP is faster.V2.0 R0.8 25.11.2013
- DNS connection name changed because of performance and connection problemsV2.0 R0.6 01.07.2013
- Integrated Browser improovments
- ini Files will no longer deleted at software updateV2.0 R0.2 13.02.2013
- Troubleshooting: Sporadic re-display of login box after dial-in
- Troubleshooting: Proxy settings are not applied
- Troubleshooting: Termination after login with incorrect login information is now displayed with an error message
- Improvment: Menu buttons located in the network information dialog removedV2.0 R0.1 01.02.2013
- Complete GUI rebuild for better usability
- Some improvements under Windows 7V1.1 R0.5 02.05.2011
- improvement for additional proxy server connections
- OK button text changed to "Go back to taskbar"
- direct connection init after program start can now be activated in the settings menuV1.1 R0.4 07.12.2010
- improvement for proxy server connectionsV1.1 R0.2 02.11.2010
- 1st release - REX 100 Ethernet Router700-875-WIF01REX 100 WiFi, 4 x LAN (switch)/1 x WiFi interface
REX 100, Firmware 2.2.11 14 MB History Version 2.2.11 (07.04.2022)
***************************************************************************************************************
Bugfix
[MINI-75] - Cellular connections didn´t work while using connect on demand (digital input or Function button)***************************************************************************************************************
Version 2.2.10 (14.03.2022)
***************************************************************************************************************
Optimization
[MINI-74] - DNS-Server negotiation with mobile service provider optimized
[MINI-73] - (2.2.9) Increase timeout for cellular network-test***************************************************************************************************************
Version 2.2.8 (08.12.2021)
***************************************************************************************************************
Bugfix
[MINI-71] - DNS server entries were in wrong order
[MINI-72] - Old assigned DNS server from DHCP weren´t deleted***************************************************************************************************************
Version 2.2.7 (02.09.2021)
***************************************************************************************************************
Bugfix
[MINI-68] - [Bug: MB-897] VPN connection problem after factory reset and configuration
[MINI-69] - [Bug: MB-899] Occasional connection loss of cellular connection which won´t reconnectOptimization
[MINI-54] - Implement new cellular Modem for EU
[MINI-55] - Implement new cellular Modem for AT&T NA***************************************************************************************************************
Version 2.2.5 (13.08.2021)
***************************************************************************************************************
V2.2.3:Bugfix
[MINI-56] - Hard coded WLAN SSID was shown, if no connection was possible
[MINI-58] - WiFi Channel expanded to 1 - 13
[MINI-59] - The input settings of I/O 1 and 2 wasn´t displayed correctly in the Quickstart
[MINI-60] - No WiFi connection if AP set to WPA/WPA2 and Encryption = AutomaticOptimization
[MINI-61] - More information on scanned WiFi APsV2.2.4:
Bug
[MINI-63] - VPN reconnect failed at times when testping failed
[MINI-64] - NTP service didn´t start under certain circumstancesOptimization
[MINI-65] - Debug logging optimized (LUA library messages removed)
[MINI-66] - Logging optimized by adding more information on DHCP processV2.2.5:
Bug
[MINI-67] - Occasionally so WiFi connection to iPhone hotspot and other various APs (No IP address via DHCP)
***************************************************************************************************************Version 2.2.2 (14.06.2021)
***************************************************************************************************************
Optimizations:
[MINI-52], [MINI-53] - Internal system adjustments for simply-connect integration
[MINI-49] - Internal system adjustmentsBugfixes:
[MINI-50] - Quickstart Web-GUI: Wrong display of open Ports Ports 80,443,1194
[MINI-40] - Identical USB-Ident on the USB host connection together with the built-in modemFeatures
[MINI-48] - Integration of Simply-Connect
[MINI-46] - mbCONNECT24 Serverlist update
[MINI-47] - DHCP DNS Servers is used before the DNS from settings. Priority change.
[MINI-43] - Update CI (Logo, Color)
[MINI-45] - Update WLAN application and Hardware compatibility
[MINI-44] - Status API without Login***************************************************************************************************************
Version 2.0.8 (30.04.2020)
***************************************************************************************************************
Bugfixes:
* [MINI-27] - MDH867 optimise Failover WAN/WLAN/GSM
* [MINI-32] - pppd Vulnerability CVE-2020-8597Features:
* [MINI-24] - optimise WLAN with setting: without internet monitoring
* [MINI-29] - Support für Telit Modem LE910NAG V2
* [MINI-34] - Optimise Failover switching time***************************************************************************************************************
Version 2.0.6 (18.11.2019)
***************************************************************************************************************
Bugfix:
[MINI-8] - [Support] BUGS-106 - Problem mit UMTS Modems***************************************************************************************************************
Version 2.0.4
***************************************************************************************************************
Bugfix:
[MINI-9] - Speichergrenze des Speicherbereich "Config" des Flashs wird erreichtFeature:
[MINI-5] - [Feature] FIMA-78 - Unique-Password Funktionalität bereitstellen
[MINI-7] - [Feature] FIMA-43 - Anzeige, wie mbNET verbunden ist (WAN, modem)
[MINI-10] - Abfrage HWVERSION und STAT_INET in communication.sh eingebaut***************************************************************************************************************
Version 2.0.3 (25.07.2019)
***************************************************************************************************************
Bugfix:
- [MINI-2] - fixed CTM with proxyAdd:
- #4046: new WIFI Modul support RALink 5370
***************************************************************************************************************Version 2.0.1 (11.04.2019)
****************************************************************************************************************
Bugfix:
#3953: Email sending was not working
#3957: Failover back from Modem to WAN was not working when Modem was initializing state
#3955: preset Modem connection regardless of configuration
***************************************************************************************************************Version 2.0.0 (01.04.2019)
****************************************************************************************************************
Security:
#3926 : Security update (openvpn, openssl, WEB logout)Bugfix:
#3933 : fix SearchoverIP with Beckhoff, Schneider, Pilz
#3401 : WLAN-Gateway was shown wrong at Quickstart page
#3387 : Fix PROFINET Communication between LAN-Port 4 and LAN-Port 1 to 3
#3339 : Forwarding rules were not deleted with new configuration
#3309 : Data24 download only when device is online
#3308 : wrong Firewall rule for USBOverIP when it was inactive
#3306 : fix kernel oops tty_buffer_request_room
#3295 : Firewall Forwarding: LAN IP's were accepted despite Firewall from WAN>LAN
#3234 : no access via SFTP to USB memory
#3160 : boot process tooks more than 10 minutes when WAN was static IP-Address and no cable plugged in
#2931 : improvement of failover and monitoring
#2828 : WLAN Encryption method was not taken over while setup thru Quickstart
#2781 : Memory overflow with Hardwareversion 0Feature:
#3929 : add SNAT for LAN to WAN
#3928 : add SimpleNAT
#3927 : add Selectable Interface for Firewallrules
#2868 : show MAC-Addresses on Quickstart page
#2717 : delete conntrack Filter each firewall reset
#2516 : add Ignore traffic setting for LAN and local Services
#3310 : Firmwareversion is also shown in syslog now***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Increased the GSM-timeout
#2828: Improved the WLAN firststart
#2840: Improved the re-connection of the devices
#2739: A text document with detailed information will be created after a configuration download to the device fails because of a wrong configuration fileImprovements:
#2680: Masquerading
#2717: Conntrack filter will be flushed after every firewall restart
#2750: Authentication method for proxy users added
SEARCHoverIP function implemented***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Timeout für GSM-Verbindung erhöht
#2828: Firststart Anpassung für WLAN
#2840: Anpassung des Wiederverbindungsaufbaus
#2739: Verhalten bei Fehlerhaften aufspielen der Konfiguration optimiertVerbesserung:
#2680: Masquerading
#2717: Firewall wird nach Neustart gelöscht
#2750: Authentifizierungsmethode beim Proxy Benutzername
SEARCHoverIP Funktion implementiert****************************************************************************************************************
Version 1.8.1 (07.07.2016)
****************************************************************************************************************
Bugfix:
major Bugfix regarding USBoverIP****************************************************************************************************************
Version 1.8.0 (30.06.2016)
****************************************************************************************************************
Bugfix:
#2357: after activating USBoverIP no configtransfer via USB possible
#2358: after activating USBoverIP USB was mounted for SFTP****************************************************************************************************************
Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: Anpassung des Quickstarts
#1914: Anpassungen beim ZeitabgleichVerbesserung:
USBoverIP funktion hinzugefügt
****************************************************************************************************************Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: improved the quickstart
#1914: improved the time-adjustingImprovements:
Included USBoverIP function
************************************************************************************************************************************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS Anzeige war Fehlerhaft
#2205: Übersetzungsfehler Deutsch <> Englisch
#2204: Befehle auf Diagnose Seite konnten nicht ausgeführt werden
#2171: Sicherheitslücke (CVE ID: CVE-1999-0524) geschlossen
#2207: Bei Fehlermeldung am Gerät wurde die falsche IP-Adresse angezeigtVerbesserung:
#2176: Allgemein: Diagnose Seite implementiert
********************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS information was not correct
#2205: Wrong translations German <> English
#2204: Commands on the Diagnostics page couldn´t be executed
#2171: Security vulnerability (CVE ID: CVE-1999-0524) fixed
#2207: After an error message on the device, the wrong IP address was shownImprovements:
#2176: General: Diagnostics page implemented
********************************************************************************************************************************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Verbindung wurde unter bestimmten Umständen selbstständig aufgebaut
#2127 VPN: Monitoring verhinderte Verbingsaufbau
#1660 VPN: VPN Verbindung bei Eingang 1 funktionierte nur sporadisch
#2130 Firewall: NAT Funktionlität optimiertVerbesserung:
Allgemein: Kompatibilität mit WLAN (MDH863) und LTE (MDH862) Geräten****************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Connection has been established in spite of "on demand"
#2127 VPN: Monitoring prevented VPN connection
#1660 VPN: built sporadically a VPN connection at input 1
#2130 Firewall: NAT functionality optimizedImprovements:
General: Compatibility with WiFi (MDH863) and LTE (MDH862) devices****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Anzeigefehler im Quickstart
#1658, #1825, #1525 Allgemein: Anpassen des blinkverhaltens der CON LED
#1436 VPN: SMS Befehl eingefügt
#1306 NTP: Anpassen der Uhrzeit bei deaktiviertem NTP
#1524 Modem: Unterbinden eines PPP Neustarts
#1899, #1837 VPN: Gerät kam nach Verbindungsabbau erneut online****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Displayerror at the Quickstart
#1658, #1825, #1525 Allgemein: Adjusting the CON LED blinking behavior
#1436 VPN: Inserted SMS command
#1306 NTP: Adjust the time if the NTP is disabled
#1524 Modem: Prevent PPP restarts
#1899, #1837 VPN: Device came back online after disconnection****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: Kein Verbindungsaufbau wenn Username bei APN leer
#989 VPN: VPN-Verbindung brach unter bestimmten Umständen ab
#1243 NTP: Keine Verbindung bei blockiertem NTP-Port
#1258 Allgemein: Das connection monitoring war nicht abschaltbarVerbesserungen:
#1117 Firewall: Anpassungen an der Firewall
#1233 Allgemein: Dienste gepatcht****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: No internetconnection if the APN username was empty
#989 VPN: VPN connection got lost in certain cases
#1243 NTP: No connection if NTP port was blocked
#1258 General: Connection monitoring wasn´t defeatableImprovements:
#1117 Firewall: Firewall improvements
#1233 General: Patched some services****************************************************************************************************************
Version 1.2.0 (28.11.2014)
****************************************************************************************************************
Bugfix:
#1021 CTM: Proxy server will be used as testserver whenever internetconnection is via external router (WAN)
#1014 CTM: CTM now uses only IPV4 DNS request
#1000 LAN: now supporting 10MBIT/s devices connected to LAN
#994 CTM: CTM ignored Proxy setting
#993 LAN: switch through Port 3 and 4 was not workingImprovements:
#1027 Web-GUI: Icon Step 3 is now signed as green whenever NTP service was not started before (NTP icon is gray)****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Category: Firmware mbNET.mini
Version: 1.1.2Bugfix:
#896 Modem: With SIM-cards from different providers (o2, E-Plus, Vodafone) the ISP hasn´t given a local IP address. In the logfile the error message "Could not determine local IP address" appeared, consequently the device couldn´t establish an internet connection. This has been fixed in this version.Improvements:
#891 General: Close a security gap
#856 Update: The firmware file will also be accepted in a <Firmwarename>_<Version>.sbs format****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Kategorie: Firmware mbNET.mini
Versionsnummer: 1.1.2Bugfix:
#896 Modem: Bei SIM-Karten von verschiedenen Providern (o2, E-Plus, Vodafone) wurde vom ISP keine lokale IP-Adresse vergeben. Im Logfile erschien die Fehlermeldung "Could not determine local IP address", infolgedessen konnte keine Internetverbindung hergestellt werden. Dies wurde in dieser Version behoben.Verbesserung:
#891 Allgemein: Schließen einer Sicherheitslücke
#856 Update: Die Firmwaredatei wird nun auch im Format <Firmwarename>_<Version>.sbs akzeptiert****************************************************************************************************************
Initial Firmwareversion: 1.1.1
****************************************************************************************************************REX 100, Firmware shDIALUP (Windows 7; Windows 8; Windows 10) 3.9.R0.5 69 MB History =============================================================
(shDIALUP) History of the Versions for router (700-87x-xxxxx)
=============================================================V 3.9.R0.5 08.07.2021
Changelogs:
[DIALUP-23] - [Bug: MB-828] Security fix
[DIALUP-24] - [Bug: MB-829] Security fix
Bugfix:
[DIALUP-8] - [Support] BUGS-130 - Zugriffsverletzung Dialup
[DIALUP-19] - [Test: DIALUP-10] [Support] BUGS-138 - shDIALUP friert ein nach Eingabe eines Benutzers ohne "@"
[DIALUP-20] - [Test: DIALUP-9] [Support] BUGS-132 - OpenVPN.log bei shDIALUP V3.9 R0.2 nicht vorhanden
[DIALUP-21] - [Test: DIALUP-11] [Support] BUGS-181 - addtap.bat verweist auf nicht vorhandene OemWin2k.inf
V 3.9.R0.1 08.08.2019
- new menu "Create Supportinformation" at Info-Button. All Logfiles will be packed in ZIP file
- new menu "Open Data Directory" at Info-Button.It opens the Explorer at your Data Directory File location.
- Check for Updates in INI disabled
- separate Appdata Installation path for all users or single user
- fix HTTP-Proxy connection. (use of OpenVPN 2.3.18 since 2.4.x has community confirmed issue with HTTP-Proxy)
load Chrome DLL libcef.dll from absolute installation path to not conflict with other installations.
- Bluescreen when accessing VCOM. Driver update from V7 to V9.
- new Chromium Version 74.0.3729.131 and CEF4 for internal browser improvements
- fix Auto-Login in shDIALUP
- fix OpenVPN 2.4.5 issue regarding auto-proxy
- Update TAP Driver 9.0.0.21 (Version 9.21.2)
- Default Setting "Override IE automatic proxy search settings" is now FALSE
- Freeze after "Connect after programstart (username and password must be specified in the serverlist)" if Username or Password was not given
- update integrated Browser with (CEF 3.3538.1848.g1d1fe01 which includes Chromium 70.0.3538.77)
- corrected some typos on settings page
- if there was a "." in the device name while configuring through network, the transfer failed. Now "." are allowed.
- Sometimes an error occured while downloading configration file to the computer
- Sometimes software freezed after Exit
- corrected typo in installation routine
- If "conftool" option was disabled, the configuration process through network didn't finished
- add check for updates function at menu "info"
- Funktion to check for updates added. See Icon "Info" and submenu "Check for updates"
- TLS Cipher given to OpenVPN configuration
- auto-logout from Server when exiting shDIALUP
- The option "Override IE" is now default = FALSE
V 3.7.R1.0 03.02.2017
- shDIALUP freezes after uploading a file
- "I forgot my password" function has been reactivated
- When using the V1 portal, the disconnection did not work properly
- No error message when starting the software
- When closing, an error came up sporadically
- Display error when a dropdown menu is opened and the shDIALUP window is moved fixed
- Sporadically VPN authentification error fixed
- SEARCHoverIP function integrated
V 3.6.R0.0 30.09.2016
- In addition to the server selection V1 also the address of Portal V2 is now selectable
- official release for Win 10
- Error Message when Username is wrong is now in more detail
- Login for Google Auth possible
- Integrate USB-over-IP Function
V3.4 R0.0 13.05.2015
- A second start of the software will now be prevented
- It is now possible to refresh the user interface by clicking the F5 button
- enhance the error message when the installer detects a second instance of shDIALUP
- disbale plugins for the integrated browser to prevent from Adware
- Fix error with white or black screens after login or starting of shDIALUP
- Check the availibility of the TAP-Windows Adapter V9
- Automatic Proxy Settings search could now be disabled
- Proxy settings of the IE were overwritten
V3.1 R0.0 25.07.2014
- The module VCOM LAN2 has been integrated - the virtual COM ports are automatically searched for and assigned
- A newer version of Chromium browser is in use (CeF3)
- Scan and configuring devices directly via LAN is possible now
- Supports Windows 8 32/64
- Automatic discovery of proxy server in the Internet Explorer is now suppressed, so that the loading time of shDIALUP is faster.V2.0 R0.8 25.11.2013
- DNS connection name changed because of performance and connection problemsV2.0 R0.6 01.07.2013
- Integrated Browser improovments
- ini Files will no longer deleted at software updateV2.0 R0.2 13.02.2013
- Troubleshooting: Sporadic re-display of login box after dial-in
- Troubleshooting: Proxy settings are not applied
- Troubleshooting: Termination after login with incorrect login information is now displayed with an error message
- Improvment: Menu buttons located in the network information dialog removedV2.0 R0.1 01.02.2013
- Complete GUI rebuild for better usability
- Some improvements under Windows 7V1.1 R0.5 02.05.2011
- improvement for additional proxy server connections
- OK button text changed to "Go back to taskbar"
- direct connection init after program start can now be activated in the settings menuV1.1 R0.4 07.12.2010
- improvement for proxy server connectionsV1.1 R0.2 02.11.2010
- 1st release - REX 300, Ethernet Router700-872-MDM02REX 300 WAN+analog Modem, PROFIBUS/MPI, serial interface
REX 300, Firmware (for devices with order numbers ending in 02) 3.7.0 12 MB History ====================================================================
(REX 300 Firmware for devices with order numbers ending in 02) History of Versions
====================================================================V3.7.0 (01.12.2016)
Bugfix:
LUA menu wasn´t displayed correct via web2go
DHCP: Even if the client doesn´t send a hostname, the IP-address will be listed in the Status > DHCP Server menu
Improvements:
Conntrack filter will be flushed after every firewall restart
"Ignore interal traffic" and "Ignore traffic on LAN" function when using an "on demand" connection implemented
A text document with detailed information will be created on the USB stick after a configuration download to the device fails because of a corrupted file
HTTP requests to monitoring SMS-status implemented
SEARCHoverIP function implemented
V3.6.0 (18.08.2015)
Bugfix:
- General: Revised the MPI-/Profibuscommunication with TIA V13
- General: Reading the firmware version from the device fails under certain circumstances
- NTP: Double start of NTP is prevented
- Modem: Set new timeout for establishing the connection
- Modem: Default DNS-Server customized
- Web-Gui: Redirect after activating HTTPS or changing the HTTP port isn´t working
- Web-GUI: Display error in the quickstart
- Config: Configuration from a false devicetype was taken over
- Firststart: After First-Start the device name wasn´t taken over
- Logs: Logmessages weren´t complete sometimes
New function:
- General: Changed the starting order of the services
- Web-Gui: Added French language
- Proxy: Defined authentication methods for proxy
Improvements:
- Modem: Added APN for Global SIM
- Web-Gui: Customizing of all the warnings/messages
- NTP: If the NTP server could not be reached, the time will be updated via CTM
- Quickstart: If DHCP is selected on Quickstart and a WAN IP address was given which is in the same range as the LAN IP address, a warning message appears
V3.4.1 (19.02.2015)
Bugfix:
- Security update (Shellshock)
- OpenVPN: Upgrade to V2.3.6 (CVE-2014-8104)
- WEB: deactivate SSLv3 in HTTPS Webserver (Poodle!)
- I/O Manager: Zipped logfiles were sporadically filled with zero.
- I/O-Manager: The logging of the I/O-Manager was interrupted, if the time of the router was updated in the meantime (NTP update as well)
- General: Textual corrections on the english GUI
New function:
- CTM: Router is downloading the configuration from the portal automatically
- Quickstartpage, Quick-start optimized
- SMS command to load a configuration from USB-stick (CFG RESTORE [filename])
- Internet-SMS: It is possible to send an "Alarmmanager" SMS trough the myREX24 portal (SMS licences are necessary)
Improvements:
- Log: Removed unnecessary Log-outputs after the LAN-IP address has been changed
- Mail: Mails send via external mailserver were optimimzed
- System: Added Timezone India to System menu
- Modem: If there is a failure at the SIM-card for five times, the gsm-modem will restart automatically
- Firewall: Passive FTP connections from LAN to WAN weren´t supported. The firewall is supporting the package MLSD now and is recognizing a passive FTP connection even if the firewall status is on maximum.
- Modemcommunication optimized
- During a firmwareupdate, a reboot because of failover is disabled
- From now on a firmware update is only possible with an encrypted file
- I/O Manager: Parameter "Max archive period time [h]" is supported now
- Network: The WAN interface is set to DHCP after factory reset
V3.1.1 25.06.2013
- Modem: Expansion of configuration via HTTP request
- Internet: Failover: Parameter "Modem restart" added
- Internet: Failover: WAN with DHCP improoved
- Internet: Failover: Modem initialization improoved
- Wizard: Problem with google chrome and firefox browser solved
- Internet: Failover: If the WAN-interface is usable again, the device will switch from modem back to WAN interface (ping function is necessary)
- Internet: GSM: Username and Password will be assigned every time. If no username and password is set, dummy values will be assigned. Improoves compatibility with GSM providers
- Toolbox: Function added
- LUA: LUA interpreter added
V3.0.10 31.07.2012
- OpenVPN: WAN and DHCP Client function was improved
V3.0.9 10.06.2012
- Router is now configurable via http request
- IPSec: Replay Window function deactivated. This improves comatibility
- Improvements for failover function
- I/O Manager bug (logging and archiving function) fixed
V3.0.8 17.04.2012
- device restart after firewall change is not necessary
- firewall entries are handled correctly
- USB detection improved
- IPSec: Aggressive Mode added
- I/O-Manager: Restart button for the service in diagnostic menu added
- I/O-Manager: Messages from data logger will be shown
- I/O-Manager: All tag addresses will be added with big letters
V3.0.7 04.04.2012
- inactive firewall fixed
V3.0.6 22.02.2012
- Error fix I/O Manager
V3.0.5 16.02.2012
- Error fix internet connection by GSM modem
V3.0.4 10.02.2012
- 1st releaseREX Ethernet Router, shDIALUP 3.7 R1.0 34 MB - REX 300, Ethernet Router700-873-WAN02REX 300, WAN, PROFIBUS/MPI, serial port
REX 300, Firmware (for devices with order numbers ending in 02) 3.7.0 12 MB History ====================================================================
(REX 300 Firmware for devices with order numbers ending in 02) History of Versions
====================================================================V3.7.0 (01.12.2016)
Bugfix:
LUA menu wasn´t displayed correct via web2go
DHCP: Even if the client doesn´t send a hostname, the IP-address will be listed in the Status > DHCP Server menu
Improvements:
Conntrack filter will be flushed after every firewall restart
"Ignore interal traffic" and "Ignore traffic on LAN" function when using an "on demand" connection implemented
A text document with detailed information will be created on the USB stick after a configuration download to the device fails because of a corrupted file
HTTP requests to monitoring SMS-status implemented
SEARCHoverIP function implemented
V3.6.0 (18.08.2015)
Bugfix:
- General: Revised the MPI-/Profibuscommunication with TIA V13
- General: Reading the firmware version from the device fails under certain circumstances
- NTP: Double start of NTP is prevented
- Modem: Set new timeout for establishing the connection
- Modem: Default DNS-Server customized
- Web-Gui: Redirect after activating HTTPS or changing the HTTP port isn´t working
- Web-GUI: Display error in the quickstart
- Config: Configuration from a false devicetype was taken over
- Firststart: After First-Start the device name wasn´t taken over
- Logs: Logmessages weren´t complete sometimes
New function:
- General: Changed the starting order of the services
- Web-Gui: Added French language
- Proxy: Defined authentication methods for proxy
Improvements:
- Modem: Added APN for Global SIM
- Web-Gui: Customizing of all the warnings/messages
- NTP: If the NTP server could not be reached, the time will be updated via CTM
- Quickstart: If DHCP is selected on Quickstart and a WAN IP address was given which is in the same range as the LAN IP address, a warning message appears
V3.4.1 (19.02.2015)
Bugfix:
- Security update (Shellshock)
- OpenVPN: Upgrade to V2.3.6 (CVE-2014-8104)
- WEB: deactivate SSLv3 in HTTPS Webserver (Poodle!)
- I/O Manager: Zipped logfiles were sporadically filled with zero.
- I/O-Manager: The logging of the I/O-Manager was interrupted, if the time of the router was updated in the meantime (NTP update as well)
- General: Textual corrections on the english GUI
New function:
- CTM: Router is downloading the configuration from the portal automatically
- Quickstartpage, Quick-start optimized
- SMS command to load a configuration from USB-stick (CFG RESTORE [filename])
- Internet-SMS: It is possible to send an "Alarmmanager" SMS trough the myREX24 portal (SMS licences are necessary)
Improvements:
- Log: Removed unnecessary Log-outputs after the LAN-IP address has been changed
- Mail: Mails send via external mailserver were optimimzed
- System: Added Timezone India to System menu
- Modem: If there is a failure at the SIM-card for five times, the gsm-modem will restart automatically
- Firewall: Passive FTP connections from LAN to WAN weren´t supported. The firewall is supporting the package MLSD now and is recognizing a passive FTP connection even if the firewall status is on maximum.
- Modemcommunication optimized
- During a firmwareupdate, a reboot because of failover is disabled
- From now on a firmware update is only possible with an encrypted file
- I/O Manager: Parameter "Max archive period time [h]" is supported now
- Network: The WAN interface is set to DHCP after factory reset
V3.1.1 25.06.2013
- Modem: Expansion of configuration via HTTP request
- Internet: Failover: Parameter "Modem restart" added
- Internet: Failover: WAN with DHCP improoved
- Internet: Failover: Modem initialization improoved
- Wizard: Problem with google chrome and firefox browser solved
- Internet: Failover: If the WAN-interface is usable again, the device will switch from modem back to WAN interface (ping function is necessary)
- Internet: GSM: Username and Password will be assigned every time. If no username and password is set, dummy values will be assigned. Improoves compatibility with GSM providers
- Toolbox: Function added
- LUA: LUA interpreter added
V3.0.10 31.07.2012
- OpenVPN: WAN and DHCP Client function was improved
V3.0.9 10.06.2012
- Router is now configurable via http request
- IPSec: Replay Window function deactivated. This improves comatibility
- Improvements for failover function
- I/O Manager bug (logging and archiving function) fixed
V3.0.8 17.04.2012
- device restart after firewall change is not necessary
- firewall entries are handled correctly
- USB detection improved
- IPSec: Aggressive Mode added
- I/O-Manager: Restart button for the service in diagnostic menu added
- I/O-Manager: Messages from data logger will be shown
- I/O-Manager: All tag addresses will be added with big letters
V3.0.7 04.04.2012
- inactive firewall fixed
V3.0.6 22.02.2012
- Error fix I/O Manager
V3.0.5 16.02.2012
- Error fix internet connection by GSM modem
V3.0.4 10.02.2012
- 1st releaseREX Ethernet Router, shDIALUP 3.7 R1.0 34 MB - REX 300, Ethernet Router700-874-UMT02REX 300 eco UMTS
REX 300, Firmware (for devices with order numbers ending in 02) 3.7.0 12 MB History ====================================================================
(REX 300 Firmware for devices with order numbers ending in 02) History of Versions
====================================================================V3.7.0 (01.12.2016)
Bugfix:
LUA menu wasn´t displayed correct via web2go
DHCP: Even if the client doesn´t send a hostname, the IP-address will be listed in the Status > DHCP Server menu
Improvements:
Conntrack filter will be flushed after every firewall restart
"Ignore interal traffic" and "Ignore traffic on LAN" function when using an "on demand" connection implemented
A text document with detailed information will be created on the USB stick after a configuration download to the device fails because of a corrupted file
HTTP requests to monitoring SMS-status implemented
SEARCHoverIP function implemented
V3.6.0 (18.08.2015)
Bugfix:
- General: Revised the MPI-/Profibuscommunication with TIA V13
- General: Reading the firmware version from the device fails under certain circumstances
- NTP: Double start of NTP is prevented
- Modem: Set new timeout for establishing the connection
- Modem: Default DNS-Server customized
- Web-Gui: Redirect after activating HTTPS or changing the HTTP port isn´t working
- Web-GUI: Display error in the quickstart
- Config: Configuration from a false devicetype was taken over
- Firststart: After First-Start the device name wasn´t taken over
- Logs: Logmessages weren´t complete sometimes
New function:
- General: Changed the starting order of the services
- Web-Gui: Added French language
- Proxy: Defined authentication methods for proxy
Improvements:
- Modem: Added APN for Global SIM
- Web-Gui: Customizing of all the warnings/messages
- NTP: If the NTP server could not be reached, the time will be updated via CTM
- Quickstart: If DHCP is selected on Quickstart and a WAN IP address was given which is in the same range as the LAN IP address, a warning message appears
V3.4.1 (19.02.2015)
Bugfix:
- Security update (Shellshock)
- OpenVPN: Upgrade to V2.3.6 (CVE-2014-8104)
- WEB: deactivate SSLv3 in HTTPS Webserver (Poodle!)
- I/O Manager: Zipped logfiles were sporadically filled with zero.
- I/O-Manager: The logging of the I/O-Manager was interrupted, if the time of the router was updated in the meantime (NTP update as well)
- General: Textual corrections on the english GUI
New function:
- CTM: Router is downloading the configuration from the portal automatically
- Quickstartpage, Quick-start optimized
- SMS command to load a configuration from USB-stick (CFG RESTORE [filename])
- Internet-SMS: It is possible to send an "Alarmmanager" SMS trough the myREX24 portal (SMS licences are necessary)
Improvements:
- Log: Removed unnecessary Log-outputs after the LAN-IP address has been changed
- Mail: Mails send via external mailserver were optimimzed
- System: Added Timezone India to System menu
- Modem: If there is a failure at the SIM-card for five times, the gsm-modem will restart automatically
- Firewall: Passive FTP connections from LAN to WAN weren´t supported. The firewall is supporting the package MLSD now and is recognizing a passive FTP connection even if the firewall status is on maximum.
- Modemcommunication optimized
- During a firmwareupdate, a reboot because of failover is disabled
- From now on a firmware update is only possible with an encrypted file
- I/O Manager: Parameter "Max archive period time [h]" is supported now
- Network: The WAN interface is set to DHCP after factory reset
V3.1.1 25.06.2013
- Modem: Expansion of configuration via HTTP request
- Internet: Failover: Parameter "Modem restart" added
- Internet: Failover: WAN with DHCP improoved
- Internet: Failover: Modem initialization improoved
- Wizard: Problem with google chrome and firefox browser solved
- Internet: Failover: If the WAN-interface is usable again, the device will switch from modem back to WAN interface (ping function is necessary)
- Internet: GSM: Username and Password will be assigned every time. If no username and password is set, dummy values will be assigned. Improoves compatibility with GSM providers
- Toolbox: Function added
- LUA: LUA interpreter added
V3.0.10 31.07.2012
- OpenVPN: WAN and DHCP Client function was improved
V3.0.9 10.06.2012
- Router is now configurable via http request
- IPSec: Replay Window function deactivated. This improves comatibility
- Improvements for failover function
- I/O Manager bug (logging and archiving function) fixed
V3.0.8 17.04.2012
- device restart after firewall change is not necessary
- firewall entries are handled correctly
- USB detection improved
- IPSec: Aggressive Mode added
- I/O-Manager: Restart button for the service in diagnostic menu added
- I/O-Manager: Messages from data logger will be shown
- I/O-Manager: All tag addresses will be added with big letters
V3.0.7 04.04.2012
- inactive firewall fixed
V3.0.6 22.02.2012
- Error fix I/O Manager
V3.0.5 16.02.2012
- Error fix internet connection by GSM modem
V3.0.4 10.02.2012
- 1st releaseREX Ethernet Router, shDIALUP 3.7 R1.0 34 MB - SSW7-TS700-751-8VK21MPI Adapter with teleservice function
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SSW7-TS, Firmware-History 1 KB - SSW7-TS PRO700-770-8MD41MPI/PROFIBUS adapter with Modem analog
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SSW7-TS (PRO), USB Driver XP/Vista/Windows 7 (32 + 64 Bit) 2.12.24 1,014 KB can300, sas341, can400, sas340, ssw-7, dp/dp-koppler, can-bridge - WALL IE700-860-WAL01WALL IE – Industrial NAT Gateway/Firewall
WALL IE, Firmware V1.10.200 8 MB History =================================
(WALL IE) Firmware History
=================================
V1.10.200 27.09.2022
Feature: Support for new hardware version
Feature: Downgrade restriction for devices with new hardware version
V1.10.100 16.02.2022
Fix: FTP button now disabled when function unavailable
Fix: Don't allow simultaneous firmware updates from different connections
Fix: Filtering, properly show invalid port and ip range warnings
Fix: Filtering, allow adding identical source and destination addresses
Fix: Filtering, don't restrict adding 0.0.0.0/0 or 0.0.0.0-255.255.255.255
Fix: Bridge Mode is now using the MAC address of the LAN interface
Fix: Syslog now starts earlier to provide start up information
Fix: DNS, properly validate hostname
Fix: Allow setting date for leap year
Feature: FTP helper in NAT Mode for Wan2Lan
Feature: Added filtering for Layer 2 protocols in Bridge Mode
Other: Align buttons in tables to the right
Other: Don't show WAN IP and MAC when in Bridge Mode
Other: Small enhancements/fixes
V1.10.000 17.12.2020
Feature: FTP helper on Bridge Mode/Wan2Lan
Feature: Properly forward DCP frames
Feature: DNS server on LAN side
Feature: Support new protocol handler ICMP
Feature: Get DOMAINof WAN DHCP server
Fix: Reload rules when interface/s addr has been changed
Fix: Other small bugfixes
V1.08.400 20.04.2020
Feature: IP ranges in NAT mode possible
Fix: Helmholz logo link on web page is opened in same tab
Fix: Possible to use LAN IP address in NAT rule
Fix: IP range in NAT, CIDR allows bigger range than 1022
Fix: JS doesn't recognize /0 CIDR as wrong input
Fix: IP range in NAT, IP address checking is not good
Fix: Interface, JS doesn't recognize invalid netmasks
Fix: Packet filter doesn't work in some cases
Fix: Wrong error messages NAT edit rule
Fix: Possible to add NAT rule containing LAN IP address
Fix: Web: edit items, packet filter action is always set to "active"
V1.08.202 13.02.2020
- Fix: After importing config file the password does not have to be set again
V1.08.200 08.01.2020
- Feature: Implemented copy/edit rule items
- Feature: Show tooltips for rule buttons
- Feature: Enhance security responses with some critical HTTP/s headers
- Feature: Show notices by colorizing line when static route is not reachable by scope link
- Fix: Insertion of /31 netmask within packet filtering
- Fix: Unable to fetch proper month of the year
- Fix: Update official link
- Fix: Update wallie logo
- Fix: Store linceses in zip instead of bzip
- Fix: Don´t resubmit forms on refresh
V1.08.100 02.07.2019
- Feature: SNAT feature added
- Fix: Changed warning messages for non matching passwords
- Fix: Ip Addresses: Octets starting with leading “0” are now declared as invalid address
- Fix: All DNS entry are now optional
- Fix: DHCP lease time list is cleared after change of interface or dhcp settings
- Fix: Multilevel timezone entries are now saved properly when selected
- Fix: Syslog remote target identical as WAN or LAN are prohibited now
- Fix: Issue when importing config where some settings are not properly set is fixed
V1.08.004 21.09.2018
- Feature: it-user allow to change DNS/GATEWAY also
- Fix: dhcpd missing export of domain setting
- Fix: Remote syslog compatibility settings
V1.08.002 19.09.2018
- Feature: Implementation of additional user IT-user and Machine-user with corresponding access rights
- Fix: Gateway settings effective when device is in bridge mode
- Fix: Static routes on LAN side enabled
- Fix: Internal parameter name for reboot functionality corrected
- Other: Internal messaging system improved
- Other: Minor web page enhancements
V1.06.352 14.06.2018
- Fix: Activating Hostname sets WAN IPs to 0.0.0.0
V1.06.200 26.04.2018
- Fix: Issue when adding additional rules with port ranges
- Fix: Issue with webserver when clearing syslog entries
V1.06.100 05.03.2018
- Fix: Log entry when invalid certificate is uploaded
- Fix: Multiple scrollbars when modal dialog is shown
- Fix: Firmware upgrade using Edge/IE11
- Fix: Dump config without auth session
- Fix: Add tooltip for all port checkbox
- Fix: Deeplinks points to valid location
- Fix: Port validation within NAPT not triggered
- Fix: NAPT, dont allow to use LAN or WAN interface IP
- Fix: Dhcp client properly send DHCPRELEASE message when needed
- Fix: Dhcp client properly send device hostname
- Feature: Show DHCP server leases
- Feature: Show/hide DHCP expired leases
- Feature: Ip ranges for filtering (for more info read manual)
- Feature: Use new color gray/white for button color scheme
- Other: Small enhancements/fixes
V1.06.000 27.11.2017
- Feature: Implementation of DHCP server on LAN side
- Feature: Implementation of DHCP client on WAN side
- Feature: Implementation of port ranges within filter
- Feature: Implement of hostname used as DHCP option
- Fix: User interface: removed tooltips
- Fix: User interface: zeros as LAN interface address not allowed
- Fix: IE11 not properly follow redirects
- Fix: Improvement of overview page by showing more interface infos
- Fix: Setting NAT rules only when WAN interface exist
- Fix: Removed subnet restriction validator
- Other: Smaller issues fixed
V1.04.004 17.02.2017
- Fix: Kernel panic on usage of multicast ip addresses
- Fix: Error in adding NAT rule where subnets could not be distinguished
- Fix: TCP/UDP kernel panic on high network load
- Fix: Downgrade to older firmware failed
- Fix: Syslog timestamp showed wrong daylight-saving time correction
- Fix: Mapping of reserved ports used by WALL IE itself
- General: Kernel upgrade from 4.1.6 to 4.9.4
- General: Company name on website changed
- General: Company name in default certificated changed
V1.04.000 18.11.2016
- Feature: MAC filtering (whitelist/blacklist) on L2/L3
- Feature: Import/Export of configuration file
- Feature: Lan to Wan packet filtering
- Feature: Web interface access via WAN interface
- Feature: ICMP passthrough for both wan and Lan
- Feature: Confirmation of factory reset and reboot
- Feature: Added icons to buttons
- Fix: Added time and date validator
- Fix: Limited CIDR range to 30bits
- Fix: Reject multi-cast address
- Fix: Decline reverts to old input
- Fix: Upload path magic is consistent now
- Fix: Added time info to dashboard
- Web: Minor fixes and enhancements
V1.02.000 22.03.2016
- Feature: Set system time using SNTP or manually
- Feature: Add default gateway and DNS server configuration
- Usability: Redirect from http:// to https://
- Usability: Improve validation of invalid or overlapping rules
- Usability: Redirect to login after session timeout and reboot
- Usability: List syslog entries in descending order
- Usability: Info and error messages do not fade out
- Security: Minimum password length of 8 characters
- Security: Reject non-IPv4 ethernet frames in bridge mode
- TLS: Fix validity period of generated certificate
- TLS: Improve validation of exchanged certificate and key
- General: Switch to musl libc
- General: Automatic reboot after firmware upgrade
- Web: Display more hardware information
- Switch: Do not forward LLDP frames
V1.00.100 30.10.2015
- Fix: Syslog: Do not log unimportant details
- FiX: HTTPS Certificate exchange: Validate before using it
- Fix: Bridge mode: Changing of IP address not working properly
- Fix: Bridge mode: Return 404 for NAT pages when directly accessed
- Fix: Web session timeout of 15 minutes
- Fix: EEPROM check failed: Answer all requests with error message
- Fix problems with some pages in IEWALLIE, Wall IE, Wallie Infrastructure Products, Macros for EPLAN Electric P8* 1 3 MB - PROFINET-Switch700-850-4PS014-port, managed
Infrastructure Products, Macros for EPLAN Electric P8* 1 3 MB IPSet 1.04.016 23 MB History =================================
(IPSet ) Release history
=================================V1.04.016 12.08.2021
- Framework update - v1.04.002V1.04.014 09.08.2021
- Fix: manufacturer data not fetched if device is in supernet of the network interface card
- Fix: Issue with not fetching SNMP data after a failed I&M0 requestV1.04.012 11.06.2021
- Fix: Crash when loading no-existing WinPcap
- Feature: console switch for language
- Button "Flash" changed to "Flash LED"V1.04.010 28.04.2021
- Fix: Crash when checking gateway addressV1.04.008 27.04.2021
- Manufucturer name and contact information
- Unreacheable device I&M0 data warning removed
- Smaller bug-fixesV1.04.006 03.02.2021
- Manufucturer description information
- Right-click context menu
- Fix for opening web interface for device not featuring tls connectionIPSet, IP Set PROFINET-Switch, 4/8/16-port, GSDML file 9-2019 20 KB PROFINET-Switch, 4/8/16-port, GSDML file PROFINET Switch 4-port, Firmware V1.10.018 11 MB History ====================================
History PROFINET-Switch 4, 8 and 16-Port, managed
====================================V1.10.018 13.09.2022
- Fix hotlinks on web interface
- Fix issue with TLS certificate dataV1.10.016 25.08.2022
- Fix factory default reset bug
- Fix LLDP issue in 4-port PN-switchV1.10.014 08.08.2022
- Prevent downgrade to versions prior to V1.10.014 for devices with new NAND flash
- Fix bug with timezone setting when using NTPV1.10.012 11.02.2022
- Internal improvements of switch communication
- Bug fixesV1.10.008 07.07.2020
- New design of webinterface.
- Improved dialog of firmware update functionality.
- Minor general improvements.
- Licence information updated.V1.08.110 24.09.2019:
- Minor changes from passed PROFINET Certification V2.34 to consolidate all switch variants to same version.
- Identification of HW version on 4 port switch variant fixed.
- User notification of first login added when selected password exceeds 20 characters.
- Adapted licence file for OEM partners.
- Added ID for ip 67 variant of 8 port switch for firmware update functionality.
- Increased brightness of leds for ip 67 variant of 8 port switch.
- Issue on connectivity and function of port mirroring for 16 port variant fixed.V1.08.004 27.05.2019:
- Internal switch communication stabilized.
- All LEDs are turned on shortly after powering the switch for function check.
- Firmware adapted PROFINET-Switch 8-Port IP67.V1.06.024 25.01.2019:
- PROFINET certification completed.
- General improvements.V1.06.020 15.11.2018:
- Any 2 ports can be used for MRP functionality.
- MRP functionality improved.
- Secure webserver access with TLS encryption (only https access).
- Factory default password is serial number of device.
- SSH, Telnet and CLI removed (improved security).
- I&M0-3 data is stored persistent.
- Automatic restart after firmware update.
- Improved event logging.
- Broadcast/Multicast storm protection activated.
- Corrections in SNMP data.
- Corrections in NTP/SNTP functionality.
- General improvement for stability
- Functionality according to PROFINET specification 2.34.PROFINET Switch 4-port, Firmware - PROFINET-Switch700-850-8PS018-port, managed
Infrastructure Products, Macros for EPLAN Electric P8* 1 3 MB IPSet 1.04.016 23 MB History =================================
(IPSet ) Release history
=================================V1.04.016 12.08.2021
- Framework update - v1.04.002V1.04.014 09.08.2021
- Fix: manufacturer data not fetched if device is in supernet of the network interface card
- Fix: Issue with not fetching SNMP data after a failed I&M0 requestV1.04.012 11.06.2021
- Fix: Crash when loading no-existing WinPcap
- Feature: console switch for language
- Button "Flash" changed to "Flash LED"V1.04.010 28.04.2021
- Fix: Crash when checking gateway addressV1.04.008 27.04.2021
- Manufucturer name and contact information
- Unreacheable device I&M0 data warning removed
- Smaller bug-fixesV1.04.006 03.02.2021
- Manufucturer description information
- Right-click context menu
- Fix for opening web interface for device not featuring tls connectionIPSet, IP Set PROFINET-Switch, 4/8/16-port, GSDML file 9-2019 20 KB PROFINET-Switch, 4/8/16-port, GSDML file PROFINET Switch 8-port, Firmware V1.10.018 11 MB History ====================================
History PROFINET-Switch 4, 8 and 16-Port, managed
====================================V1.10.018 13.09.2022
- Fix hotlinks on web interface
- Fix issue with TLS certificate dataV1.10.016 25.08.2022
- Fix factory default reset bug
- Fix LLDP issue in 4-port PN-switchV1.10.014 08.08.2022
- Prevent downgrade to versions prior to V1.10.014 for devices with new NAND flash
- Fix bug with timezone setting when using NTPV1.10.012 11.02.2022
- Internal improvements of switch communication
- Bug fixesV1.10.008 07.07.2020
- New design of webinterface.
- Improved dialog of firmware update functionality.
- Minor general improvements.
- Licence information updated.V1.08.110 24.09.2019:
- Minor changes from passed PROFINET Certification V2.34 to consolidate all switch variants to same version.
- Identification of HW version on 4 port switch variant fixed.
- User notification of first login added when selected password exceeds 20 characters.
- Adapted licence file for OEM partners.
- Added ID for ip 67 variant of 8 port switch for firmware update functionality.
- Increased brightness of leds for ip 67 variant of 8 port switch.
- Issue on connectivity and function of port mirroring for 16 port variant fixed.V1.08.004 27.05.2019:
- Internal switch communication stabilized.
- All LEDs are turned on shortly after powering the switch for function check.
- Firmware adapted PROFINET-Switch 8-Port IP67.V1.06.024 25.01.2019:
- PROFINET certification completed.
- General improvements.V1.06.020 15.11.2018:
- Any 2 ports can be used for MRP functionality.
- MRP functionality improved.
- Secure webserver access with TLS encryption (only https access).
- Factory default password is serial number of device.
- SSH, Telnet and CLI removed (improved security).
- I&M0-3 data is stored persistent.
- Automatic restart after firmware update.
- Improved event logging.
- Broadcast/Multicast storm protection activated.
- Corrections in SNMP data.
- Corrections in NTP/SNTP functionality.
- General improvement for stability
- Functionality according to PROFINET specification 2.34.PROFINET Switch 8-port, Firmware - TB20-C, bus coupler600-180-1AA11PROFINET IO
TB20, GSDML file for PROFINET Bus Coupler (from firmware version 1.02, please update your firmware) 20190319 45 KB TB20, GSDML file for PROFINET Bus Coupler (from firmware version 1.02, please update your firmware) IPSet 1.04.016 23 MB History =================================
(IPSet ) Release history
=================================V1.04.016 12.08.2021
- Framework update - v1.04.002V1.04.014 09.08.2021
- Fix: manufacturer data not fetched if device is in supernet of the network interface card
- Fix: Issue with not fetching SNMP data after a failed I&M0 requestV1.04.012 11.06.2021
- Fix: Crash when loading no-existing WinPcap
- Feature: console switch for language
- Button "Flash" changed to "Flash LED"V1.04.010 28.04.2021
- Fix: Crash when checking gateway addressV1.04.008 27.04.2021
- Manufucturer name and contact information
- Unreacheable device I&M0 data warning removed
- Smaller bug-fixesV1.04.006 03.02.2021
- Manufucturer description information
- Right-click context menu
- Fix for opening web interface for device not featuring tls connectionIPSet, IP Set TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - TB20-C, Bus coupler600-151-1AA11PROFIBUS-DP
TB20, GSD file for PROFIBUS-DP Bus Coupler 1.48 75 KB TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - TB20-C, bus coupler600-160-1AA11CANopen Slave
TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - TB20-C, Bus coupler600-170-1AA11ModbusTCP
TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - TB20-C, bus coupler600-175-1AA11EtherNet/IP
TB20, EDS file for EtherNet/IP Bus Coupler 1.1 3 KB TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - TB20-C, bus coupler600-165-1AA11DeviceNet Slave
TB20, EDS file for DeviceNet Bus Coupler 1.0 4 KB TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - PN/CAN-Gateway700-672-PNC01PROFINET/CANopen Slave
IPSet 1.04.016 23 MB History =================================
(IPSet ) Release history
=================================V1.04.016 12.08.2021
- Framework update - v1.04.002V1.04.014 09.08.2021
- Fix: manufacturer data not fetched if device is in supernet of the network interface card
- Fix: Issue with not fetching SNMP data after a failed I&M0 requestV1.04.012 11.06.2021
- Fix: Crash when loading no-existing WinPcap
- Feature: console switch for language
- Button "Flash" changed to "Flash LED"V1.04.010 28.04.2021
- Fix: Crash when checking gateway addressV1.04.008 27.04.2021
- Manufucturer name and contact information
- Unreacheable device I&M0 data warning removed
- Smaller bug-fixesV1.04.006 03.02.2021
- Manufucturer description information
- Right-click context menu
- Fix for opening web interface for device not featuring tls connectionIPSet, IP Set PN/CAN-Gateway CANopen® Slave, GSDML file 20190429 9 KB PN/CAN-Gateway CANopen® Slave, GSDML file PN/CAN-Gateway CANopen® Slave, Firmware History 543 B PN/CAN-Gateway CANopen® Slave, Firmware History PN/CAN-Gateway CANopen® Slave, EDS file V10 3 KB PN/CAN-Gateway CANopen® Slave, EDS file PN/CAN-Gateway CANopen® Slave, EDS-DCF Uploader V1.02.002 23 MB PN/CAN-Gateway CANopen® Slave, EDS-DCF Uploader - PN/CAN-Gateway700-671-PNC01PROFINET/CAN Layer 2
IPSet 1.04.016 23 MB History =================================
(IPSet ) Release history
=================================V1.04.016 12.08.2021
- Framework update - v1.04.002V1.04.014 09.08.2021
- Fix: manufacturer data not fetched if device is in supernet of the network interface card
- Fix: Issue with not fetching SNMP data after a failed I&M0 requestV1.04.012 11.06.2021
- Fix: Crash when loading no-existing WinPcap
- Feature: console switch for language
- Button "Flash" changed to "Flash LED"V1.04.010 28.04.2021
- Fix: Crash when checking gateway addressV1.04.008 27.04.2021
- Manufucturer name and contact information
- Unreacheable device I&M0 data warning removed
- Smaller bug-fixesV1.04.006 03.02.2021
- Manufucturer description information
- Right-click context menu
- Fix for opening web interface for device not featuring tls connectionIPSet, IP Set PN/CAN-Gateway CAN Layer 2, GSDML file 20200406 16 KB PN/CAN-Gateway CAN Layer 2, GSDML file PN/CAN Gateway CAN Layer 2, Firmware history 1 KB PN/CAN Gateway CAN Layer 2, Firmware history - NETLink PRO700-884-MPI21NETLink PRO Compact
NETLink, Firmware History 2.74 9 KB NETLink, Firmware History SHTools, for Windows 7/8/10 32/64 Bit 3.89 FW7 6 MB History ========================
(SHTools) History
========================
v3.89 fw7
- Update Firmware for NETLink PRO v2.74 Compact
- Update Firmware for NETLink USB v2.74 Compact
v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware for NETLink PRO v2.66 Family
- Update Firmware for NETLink PRO v2.66 Compact
- Update Firmware for NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware for NETLink PRO v2.64 Family
- Update Firmware for NETLink PRO v2.64 Compact
v3.89 fw2
- Update licence text
v3.89 fw1
- Update Firmware for NETLink PRO v2.62 Family
- Update Firmware for NETLink PRO v2.62 Compact
v3.89
- delete Adobe PDF Viewer from source
- insert direct OS Call for view PDF
- Update Firmware for NETLink PRO v2.60 Family
- Update Firmware for NETLink PRO v2.60 Compact
v3.88 fw4
- Update software certifikat for this product
v3.88 fw3
- Update Firmware for DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware for NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware for PAS 153 v1.70
v3.88
- Validate of TCP/IP in dialog
- modify menu for artikel number / text
- Update Firmware for NETLink PRO v2.54 Family
- Update Firmware for NETLink PRO v2.54 Compact
- Update Firmware for NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware for PAS 153 v1.66
v3.87 fw2
- Update Firmware for PAS 153 v1.66
- Update Firmware for SAS 340
- Update Firmware for SAS 341
v3.87 fw1
- Update Firmware for SSW7-TS PRO v4.10
v3.87
- direct update over TCP/IP
- Update Firmware for SSW7-PC v3.40
- Update Firmware for SSW7-RK512 v2.09
- Update Firmware for SSW7-TS PRO v4.08
- Update Firmware for NETLink PRO v2.52 Family
- Update Firmware for NETLink PRO v2.52 Compact
- Update Firmware for NETLink USB v2.52 Compact
v3.86
- Modifications for GSM Modems
v3.85
- Modifications for OEM capabilities
v3.84 fw1
- Rights for Setup are checked for User
- Update Firmware for NETLink USB v2.50 Compact/Family
- Update Firmware for NETLink PRO v2.50 Compact/Family
v3.84
- add product choise at startup
- remote update over GSM for SSW7 products disabled
v3.83 fw1
- Update Firmware for NETLink USB v1.61
- Update Firmware for NETLink PRO v1.61
v3.83
- Update Firmware for PAS 153 v1.64
- Update Firmware for SAS 341 v1.17
- Modification for handling INI in Win7
v3.82
- Fixpack for artikel choise
- Update Firmware for NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware for NETLink PRO Compact v2.37
- Update Firmware for NETLink PRO Family v2.37
v3.81
- Update Firmware for SAS 340
- Update Firmware for SAS 341
- include Update Support for DP/DP-Koppler
- include Info about GSM Modems
v3.80 fw1
- Update Bootloader for NETLink USB Compact
v3.80
- Setup Timeout for NETLink USB over INI
- supported now Driver DriverX and WinUsb
- Update Firmware for EIB 300 v1.02
- Update Firmware for NETLink USB Compact v2.36
- Update Firmware for NETLink USB v2 v2.36
- Update Firmware for NETLink PRO Compact v2.36
- Update Firmware for NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware for NETLink USB Compact
- Update Firmware for NETLink PRO Compact
- Update Firmware for NETLink PRO Family
v3.72 fw2
- Update Firmware for EIB 300 v1.01
v3.72 fw1
- Update Firmware for SSW7-TS PRO v4.07
only for internal test
v3.72
- Update Firmware for SSW7-HMI
- Update Firmware for NETLink USB
- Update Firmware for NETLink PRO Compact
- Update Firmware for NETLink PRO Family
- Modification for FTDI Diagnostic
- Modification for PAS 153 viBlu
v3.71
- Update Firmware for NETLink USB and PRO Classic for new Flash-Chip's
- Modification of text of information
- Modification of save procedure for SSW7-RK512 v1
v3.70 fw8
- Update Firmware for SAS 340
v3.70 fw7
- Update Firmware for NETLink PRO Compact
v3.70 fw6
- Update Firmware for NETLink PRO Family
v3.70 fw5
- Update Firmware for SSW7-HMI
v3.70 fw4
- Update Firmware for NETLink PRO Family
- Update Firmware for SAS 340/341
v3.70
- set country code for analog modems
- support a new type of GSM modem
- finding the actual position after TCP update
- Update Firmware for NETLink PRO Family
- Update Firmware for SSW7-PC/TS
- Update Firmware for SSW7-HMI
- Update Firmware for SAS 340
v3.67
- products with FTDI-chipset in inserted in menue for info and update
- Update Firmware for NETLink PRO Family V2.20
- Update Firmware for NETLink USB Family V2.20
- Update Firmware for NETLink USB Compact V2.20
v3.66
- modification of the internal product table
v3.65
- Termination of multiple searches for interfaces in one session is possible by the user, now
- Menü upgrade for NETLink PRO Family
- Menü upgrade for NETLink USB Family
- "NETLink WLAN" affiliated in the "NETLink PRO Family"
- Update Firmware for NETLink PRO Family v2.15
- Update Firmware for NETLink USB v1.57
- Update Firmware for SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware for NETLink WLAN v2.14
v3.64 fw04
- Update Firmware for NETLink WLAN v2.13
v3.64 fw03
- Update Firmware for NETLink PRO v1.56
- Update Firmware for NETLink WLAN v2.12
- Update Firmware for SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware for SSW7 family v3.28 (not PRO variant)
- Timeout for distant update routine adapted
v3.63
- Dialog for reset rassword for NETLink
- Update Firmware for NETLink PRO v1.54
- Update Firmware for SSW7-TS PRO v4.04
- Update Firmware for SSW7-TS v3.27
v3.62
- update Firmware for NETLink PRO v1.53 and SSW7-TS PRO v4.02
v3.61
- possibility to save the station name in SSW5/Lan adapter without changing the IP parameter
v3.60
- modified dialog for MDM300
- set country code for MDM300 directly
- added for RK512 v2.07 (more stable startup and operation)
- added for SSW7-TS PRO v4.01
v3.54
- added dialog for MDM300
- added dialog for SSW7-TS PRO
- insert menu for MDM300 und SSW7-TS PRO
v3.53
- New firmware for NETLink PRO v1.52
- revised view for für reachable partner
v3.52a
- New firmware for NETLink PRO v1.51
v3.52
- selection of the interface search revised
v3.51a
- New firmware for NETLink PRO v1.50
v3.51
- the parameterization function of the NETLink was advanced for the UDP-protocol
- dialog settings advanced
- the serial interface control can be switched on or off
- extended mode for serial interface search
- the dialog for the SSW5/Lan adapter was extended so that the device can be found in the network with an explicit name
v3.50b
- New firmware for SSW7 PC / TS v3.25
v3.50
- New selection menu for products
- New selection menu for interfaces
- Enable/Disable menus during update
- MDM300 products now included
- Interface monitoring activated
- Diagnostics for NETLink PRO
- Configuration dialog for NETLink PRO
- New update mechanism for NETLink family
- New firmware/Bios for NETLink v1.42
v3.21
- VISTA compatibility
- User help during startup phase
- Additions to SSW5/LAN parameter dialog
v3.20
- Additions to password functionality
- SMS transmission dialog for TS300 corrected
v3.19
- MSN init/management for ISDN expanded
- Dial-up procedure for Remote adapted
- Path structures for binary files extended
v3.18
- Display for build version integrated into "Beta"
- Improvements when reading INI with RK512 without BCC
- Writing back parameters to adapter corrected
- Control bits for TS300 now modem independent
- Logical sequences of control paths for TS300 adapted
v3.17
- Control for TS300 converted from modem to control instructions
- Adaptations as part of automatic check QSv3.34
- Serial interface is now always re-initialized before attempting to store the parameters in the adapter
- LOG functions for diagnostics with NETLink PRO included
v3.16
- Exclude functions for serial interface search integrated
- SMS transmission dialog for TS300
v3.15
- Serial interface management updated
- RK512 installed without BCC
- Distinguish between different models during modem controlSHTools, for Windows 7/8/10 32/64 Bit - NETLink PRO700-881-MPI21NETLink PRO PoE
NETLink, Firmware History 2.74 9 KB NETLink, Firmware History SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit - NETLink USB Compact700-892-MPI21NETLink USB Compact
SHTools, for Windows 7/8/10 32/64 Bit 3.89 FW7 6 MB History ========================
(SHTools) History
========================
v3.89 fw7
- Update Firmware for NETLink PRO v2.74 Compact
- Update Firmware for NETLink USB v2.74 Compact
v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware for NETLink PRO v2.66 Family
- Update Firmware for NETLink PRO v2.66 Compact
- Update Firmware for NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware for NETLink PRO v2.64 Family
- Update Firmware for NETLink PRO v2.64 Compact
v3.89 fw2
- Update licence text
v3.89 fw1
- Update Firmware for NETLink PRO v2.62 Family
- Update Firmware for NETLink PRO v2.62 Compact
v3.89
- delete Adobe PDF Viewer from source
- insert direct OS Call for view PDF
- Update Firmware for NETLink PRO v2.60 Family
- Update Firmware for NETLink PRO v2.60 Compact
v3.88 fw4
- Update software certifikat for this product
v3.88 fw3
- Update Firmware for DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware for NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware for PAS 153 v1.70
v3.88
- Validate of TCP/IP in dialog
- modify menu for artikel number / text
- Update Firmware for NETLink PRO v2.54 Family
- Update Firmware for NETLink PRO v2.54 Compact
- Update Firmware for NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware for PAS 153 v1.66
v3.87 fw2
- Update Firmware for PAS 153 v1.66
- Update Firmware for SAS 340
- Update Firmware for SAS 341
v3.87 fw1
- Update Firmware for SSW7-TS PRO v4.10
v3.87
- direct update over TCP/IP
- Update Firmware for SSW7-PC v3.40
- Update Firmware for SSW7-RK512 v2.09
- Update Firmware for SSW7-TS PRO v4.08
- Update Firmware for NETLink PRO v2.52 Family
- Update Firmware for NETLink PRO v2.52 Compact
- Update Firmware for NETLink USB v2.52 Compact
v3.86
- Modifications for GSM Modems
v3.85
- Modifications for OEM capabilities
v3.84 fw1
- Rights for Setup are checked for User
- Update Firmware for NETLink USB v2.50 Compact/Family
- Update Firmware for NETLink PRO v2.50 Compact/Family
v3.84
- add product choise at startup
- remote update over GSM for SSW7 products disabled
v3.83 fw1
- Update Firmware for NETLink USB v1.61
- Update Firmware for NETLink PRO v1.61
v3.83
- Update Firmware for PAS 153 v1.64
- Update Firmware for SAS 341 v1.17
- Modification for handling INI in Win7
v3.82
- Fixpack for artikel choise
- Update Firmware for NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware for NETLink PRO Compact v2.37
- Update Firmware for NETLink PRO Family v2.37
v3.81
- Update Firmware for SAS 340
- Update Firmware for SAS 341
- include Update Support for DP/DP-Koppler
- include Info about GSM Modems
v3.80 fw1
- Update Bootloader for NETLink USB Compact
v3.80
- Setup Timeout for NETLink USB over INI
- supported now Driver DriverX and WinUsb
- Update Firmware for EIB 300 v1.02
- Update Firmware for NETLink USB Compact v2.36
- Update Firmware for NETLink USB v2 v2.36
- Update Firmware for NETLink PRO Compact v2.36
- Update Firmware for NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware for NETLink USB Compact
- Update Firmware for NETLink PRO Compact
- Update Firmware for NETLink PRO Family
v3.72 fw2
- Update Firmware for EIB 300 v1.01
v3.72 fw1
- Update Firmware for SSW7-TS PRO v4.07
only for internal test
v3.72
- Update Firmware for SSW7-HMI
- Update Firmware for NETLink USB
- Update Firmware for NETLink PRO Compact
- Update Firmware for NETLink PRO Family
- Modification for FTDI Diagnostic
- Modification for PAS 153 viBlu
v3.71
- Update Firmware for NETLink USB and PRO Classic for new Flash-Chip's
- Modification of text of information
- Modification of save procedure for SSW7-RK512 v1
v3.70 fw8
- Update Firmware for SAS 340
v3.70 fw7
- Update Firmware for NETLink PRO Compact
v3.70 fw6
- Update Firmware for NETLink PRO Family
v3.70 fw5
- Update Firmware for SSW7-HMI
v3.70 fw4
- Update Firmware for NETLink PRO Family
- Update Firmware for SAS 340/341
v3.70
- set country code for analog modems
- support a new type of GSM modem
- finding the actual position after TCP update
- Update Firmware for NETLink PRO Family
- Update Firmware for SSW7-PC/TS
- Update Firmware for SSW7-HMI
- Update Firmware for SAS 340
v3.67
- products with FTDI-chipset in inserted in menue for info and update
- Update Firmware for NETLink PRO Family V2.20
- Update Firmware for NETLink USB Family V2.20
- Update Firmware for NETLink USB Compact V2.20
v3.66
- modification of the internal product table
v3.65
- Termination of multiple searches for interfaces in one session is possible by the user, now
- Menü upgrade for NETLink PRO Family
- Menü upgrade for NETLink USB Family
- "NETLink WLAN" affiliated in the "NETLink PRO Family"
- Update Firmware for NETLink PRO Family v2.15
- Update Firmware for NETLink USB v1.57
- Update Firmware for SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware for NETLink WLAN v2.14
v3.64 fw04
- Update Firmware for NETLink WLAN v2.13
v3.64 fw03
- Update Firmware for NETLink PRO v1.56
- Update Firmware for NETLink WLAN v2.12
- Update Firmware for SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware for SSW7 family v3.28 (not PRO variant)
- Timeout for distant update routine adapted
v3.63
- Dialog for reset rassword for NETLink
- Update Firmware for NETLink PRO v1.54
- Update Firmware for SSW7-TS PRO v4.04
- Update Firmware for SSW7-TS v3.27
v3.62
- update Firmware for NETLink PRO v1.53 and SSW7-TS PRO v4.02
v3.61
- possibility to save the station name in SSW5/Lan adapter without changing the IP parameter
v3.60
- modified dialog for MDM300
- set country code for MDM300 directly
- added for RK512 v2.07 (more stable startup and operation)
- added for SSW7-TS PRO v4.01
v3.54
- added dialog for MDM300
- added dialog for SSW7-TS PRO
- insert menu for MDM300 und SSW7-TS PRO
v3.53
- New firmware for NETLink PRO v1.52
- revised view for für reachable partner
v3.52a
- New firmware for NETLink PRO v1.51
v3.52
- selection of the interface search revised
v3.51a
- New firmware for NETLink PRO v1.50
v3.51
- the parameterization function of the NETLink was advanced for the UDP-protocol
- dialog settings advanced
- the serial interface control can be switched on or off
- extended mode for serial interface search
- the dialog for the SSW5/Lan adapter was extended so that the device can be found in the network with an explicit name
v3.50b
- New firmware for SSW7 PC / TS v3.25
v3.50
- New selection menu for products
- New selection menu for interfaces
- Enable/Disable menus during update
- MDM300 products now included
- Interface monitoring activated
- Diagnostics for NETLink PRO
- Configuration dialog for NETLink PRO
- New update mechanism for NETLink family
- New firmware/Bios for NETLink v1.42
v3.21
- VISTA compatibility
- User help during startup phase
- Additions to SSW5/LAN parameter dialog
v3.20
- Additions to password functionality
- SMS transmission dialog for TS300 corrected
v3.19
- MSN init/management for ISDN expanded
- Dial-up procedure for Remote adapted
- Path structures for binary files extended
v3.18
- Display for build version integrated into "Beta"
- Improvements when reading INI with RK512 without BCC
- Writing back parameters to adapter corrected
- Control bits for TS300 now modem independent
- Logical sequences of control paths for TS300 adapted
v3.17
- Control for TS300 converted from modem to control instructions
- Adaptations as part of automatic check QSv3.34
- Serial interface is now always re-initialized before attempting to store the parameters in the adapter
- LOG functions for diagnostics with NETLink PRO included
v3.16
- Exclude functions for serial interface search integrated
- SMS transmission dialog for TS300
v3.15
- Serial interface management updated
- RK512 installed without BCC
- Distinguish between different models during modem controlSHTools, for Windows 7/8/10 32/64 Bit - DP/DP-Koppler700-158-0AD02DP/DP coupler
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit - DP/CAN Coupler700-650-CAN01CANopen Layer 2
- DP/CAN Coupler700-651-CAN01Layer 2
- CAN 300 PRO700-600-CAN12CAN 300 PRO
CanParam, Setup 4.66 9 MB History =============================
(CANParam) History of the Versions
=============================V4.66 27.05.2019
- USB access in Windows 10 for CAN 300 PRO and CAN 400
- Index bug for bit rate settings fixed
- missing CANopen master state added for the debug screenV4.62 05.08.2016
- local project loading bug fixed
V4.60 25.02.2015
- added parameterization for the layer 2 block communication
- removed parameterization for user-specific bit rates
V4.58 10.12.2012
- Bug with the project info fixed.
- Slaves and SDOs can be copied now.
- Layer 2 script length problem fixed.
- Separate button for read/write of SDOs in the CANopen tools.
- Problem during the PDO allocation anlysis fixed.
V4.56 12.01.2012
- Fixed the project save problem with same SDOs at multiple slaves.
- Restart handling in the debug screen improved.
V4.54 03.11.2011
- After the creation of a new Slaves from an EDS file default COB IDs to the activated PDOs will be allocated.
- The adding of COM interfaces from the INI file has been fixed.
- Text assignment have been corrected.
V4.52 24.08.2011
- language chaning bugfixed
V4.51 18.08.2011
- problem with INI-saving bugfixed
V4.50 05.08.2011
- directory structures changed for Windows 7 compatibility (global and local administration)
- project save problem with the Sub/SDO names fixed
- automatic PDO I/O positioning assigments revised
- automatic expansion of the I/O image always demands user acknowledgement now
- problems in the "slave PDO allocation" window bugfixed
V4.22 22.07.2010
- EDS parser problem during the reading of PDO information is fixed.
- The firmware CAN 300 PRO v4.24 is included
V4.20 03.05.2010
- new features:
- CANopen projects
- PDO I/O area added to the project overview
- slaves can be added together with information from the EDS file
- automatic allocation of device IDs for added slaves
- number of usable PDOs increased from 4 to 8 PDOs/direction
- direct assignment of the PDO position in the projected I/O area
- COB ID is changeable now
- the Inhibit Time can be configured now
- overview of the activated PDOs added
- subindicies for the SDOs can be en- or disabled
- during project upload only the configuration of activated PDOs and SDOs is transmitted to the CAN 300 PRO
- CANopen tools:
- PDO properties in the slaves mapping details extended with COB ID, Transmission Type, Inhibit Time
- 'Copy to Clipboard' function added
- size of the CANopen tools window and size of the PDO allocation area is now changeable
- generally:
- A performance screen added to the debug screen
- revision of the debug handling
- certain COM ports which are not automatically detected by CANParam can now be added with the help of the ini file
- bug fixes:
- transmission bug during upload of large projects fixed
- bug with projects from CANParam v4.00 or older fixed
- connection bug with CAN 400 (1 and 2 channels) fixed
V4.14 23.11.2009
- CANTools SDO Transmission completed if the data type is "not identify data type"
- Connectivity problems of the CAN300 on FTDI - serial adaptern an 1 channel CAN400 products
- "Reset after failure" added to slaves
- direct PDO number allocation to the PDO objects
V4.10 07.07.2009
- CANTools advanced with SDO transmission and slave mapping
- stabilizing of the module handling
- FW Update for "CAN300 PRO" to "CAN300 PRO slave" advanced
- direct Projektupload from file added
- Debug Screen for CAN300 PRO slave added
V4.02 27.03.2009
- Identifiacation of CAN-USB modules in the interface box
- Bug during removal of a slave fixed
- Now 127 slaves can be added to a project
- Adding slaves with ID > 127 from project file prohibited
- Device detection bug in Debug Screen fixed
V4.01 16.03.2009
- Slave scanning bug fixed
- "About Us" window with firmware information updated
- Menu entries and info messages revised
V4.00 12.03.2009
- CAN300 PRO as a new module added
- CAN300 PRO Layer 2 and CANopen project planning and debugging added
- CAN400 debugging revised and real-time switching added
- Short cuts for menu functions added
V3.21 28.10.2008
- Bug in the script RUN->STOP (timer stopping) fixed
- Bit timing in the CAN300 project revised
- Improved device identification and handling of the CAN400 modules.
V3.20 20.05.2008
- Now given binary path and project path from ini file is used
- Improved device detection
- Bug at changing of devices fixed
- Improved device handling by modularizing of the software structure
- New functions added to the Debug Screen
- Improved update mode handling
- Now Windows Vista compatible
- New documentation integratedCanParam, Setup CAN 300 PRO, Firmware History 3 KB - CAN 400700-640-CAN21CAN 400-2, with 2 CAN interfaces
CanParam, Setup 4.66 9 MB History =============================
(CANParam) History of the Versions
=============================V4.66 27.05.2019
- USB access in Windows 10 for CAN 300 PRO and CAN 400
- Index bug for bit rate settings fixed
- missing CANopen master state added for the debug screenV4.62 05.08.2016
- local project loading bug fixed
V4.60 25.02.2015
- added parameterization for the layer 2 block communication
- removed parameterization for user-specific bit rates
V4.58 10.12.2012
- Bug with the project info fixed.
- Slaves and SDOs can be copied now.
- Layer 2 script length problem fixed.
- Separate button for read/write of SDOs in the CANopen tools.
- Problem during the PDO allocation anlysis fixed.
V4.56 12.01.2012
- Fixed the project save problem with same SDOs at multiple slaves.
- Restart handling in the debug screen improved.
V4.54 03.11.2011
- After the creation of a new Slaves from an EDS file default COB IDs to the activated PDOs will be allocated.
- The adding of COM interfaces from the INI file has been fixed.
- Text assignment have been corrected.
V4.52 24.08.2011
- language chaning bugfixed
V4.51 18.08.2011
- problem with INI-saving bugfixed
V4.50 05.08.2011
- directory structures changed for Windows 7 compatibility (global and local administration)
- project save problem with the Sub/SDO names fixed
- automatic PDO I/O positioning assigments revised
- automatic expansion of the I/O image always demands user acknowledgement now
- problems in the "slave PDO allocation" window bugfixed
V4.22 22.07.2010
- EDS parser problem during the reading of PDO information is fixed.
- The firmware CAN 300 PRO v4.24 is included
V4.20 03.05.2010
- new features:
- CANopen projects
- PDO I/O area added to the project overview
- slaves can be added together with information from the EDS file
- automatic allocation of device IDs for added slaves
- number of usable PDOs increased from 4 to 8 PDOs/direction
- direct assignment of the PDO position in the projected I/O area
- COB ID is changeable now
- the Inhibit Time can be configured now
- overview of the activated PDOs added
- subindicies for the SDOs can be en- or disabled
- during project upload only the configuration of activated PDOs and SDOs is transmitted to the CAN 300 PRO
- CANopen tools:
- PDO properties in the slaves mapping details extended with COB ID, Transmission Type, Inhibit Time
- 'Copy to Clipboard' function added
- size of the CANopen tools window and size of the PDO allocation area is now changeable
- generally:
- A performance screen added to the debug screen
- revision of the debug handling
- certain COM ports which are not automatically detected by CANParam can now be added with the help of the ini file
- bug fixes:
- transmission bug during upload of large projects fixed
- bug with projects from CANParam v4.00 or older fixed
- connection bug with CAN 400 (1 and 2 channels) fixed
V4.14 23.11.2009
- CANTools SDO Transmission completed if the data type is "not identify data type"
- Connectivity problems of the CAN300 on FTDI - serial adaptern an 1 channel CAN400 products
- "Reset after failure" added to slaves
- direct PDO number allocation to the PDO objects
V4.10 07.07.2009
- CANTools advanced with SDO transmission and slave mapping
- stabilizing of the module handling
- FW Update for "CAN300 PRO" to "CAN300 PRO slave" advanced
- direct Projektupload from file added
- Debug Screen for CAN300 PRO slave added
V4.02 27.03.2009
- Identifiacation of CAN-USB modules in the interface box
- Bug during removal of a slave fixed
- Now 127 slaves can be added to a project
- Adding slaves with ID > 127 from project file prohibited
- Device detection bug in Debug Screen fixed
V4.01 16.03.2009
- Slave scanning bug fixed
- "About Us" window with firmware information updated
- Menu entries and info messages revised
V4.00 12.03.2009
- CAN300 PRO as a new module added
- CAN300 PRO Layer 2 and CANopen project planning and debugging added
- CAN400 debugging revised and real-time switching added
- Short cuts for menu functions added
V3.21 28.10.2008
- Bug in the script RUN->STOP (timer stopping) fixed
- Bit timing in the CAN300 project revised
- Improved device identification and handling of the CAN400 modules.
V3.20 20.05.2008
- Now given binary path and project path from ini file is used
- Improved device detection
- Bug at changing of devices fixed
- Improved device handling by modularizing of the software structure
- New functions added to the Debug Screen
- Improved update mode handling
- Now Windows Vista compatible
- New documentation integratedCanParam, Setup CAN 400, Firmware History 670 B - CAN-Bridge700-660-2AA01CAN bridge, 2 x CAN bus interfaces
CAN-BridgeParam 2 23 MB CAN-Bridge, Firmware History 136 B - SAS 340-1700-340-1CH021 x RS422/RS485
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SAS 340/341, Firmware History 1 KB - SAS 340-2700-340-2AH022 x RS232, 2 x USB
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SAS 340/341, Firmware History 1 KB - SSW5/LAN, S5 Ethernet converter700-750-LAN13SSW5/LAN, S5 Ethernet converter
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SSW5/LAN, Setup VCOM, for Windows Vista, 7, Server 2008R2 32/64-Bit 2.0 1 MB SSW5/LAN, Setup VCOM, für Windows Vista, 7, Server 2008R2 32/64-Bit, History 2 KB - SSW5/USB S5-USB-Programmierkabel700-750-0US133 m
SSW5/USB, Setup VCOM, for Windows Vista, 7, Server 2008R2 32/64-Bit 2.0 1 MB History ======================================
SSW5/USB Setup VCOM History of the versions
======================================
Version 2.0.2.0 [Sep 23, 2013]
- Now available for Windows Vista, 7, Server 2008R2.
- Now also available for 64-Bit-OSes.
Version 1.0.8.2 [Nov 10, 2008]
- Some text corrections.
Version 1.0.8.0 [Jul 7, 2008]
- The search function improved.
- The result list of the search contains now the name of the adaptor, if there is any.
Version 1.0.6.0 [Oct 1, 2007]
- Fixed a problem saving the settings for the first time.
Version 1.0.4.0 [Sep 28, 2007]
- Optimized the communication.
Version 1.0.2.0 [Aug 13, 2007]
- Fixed problem on transferring large blocks to old CPUs.
Version 1.0.0.0 [Jul 18, 2007]
- First version. - SSW5/USB S5-USB-Programmierkabel700-750-1US135 m
SSW5/USB, Setup VCOM, for Windows Vista, 7, Server 2008R2 32/64-Bit 2.0 1 MB History ======================================
SSW5/USB Setup VCOM History of the versions
======================================
Version 2.0.2.0 [Sep 23, 2013]
- Now available for Windows Vista, 7, Server 2008R2.
- Now also available for 64-Bit-OSes.
Version 1.0.8.2 [Nov 10, 2008]
- Some text corrections.
Version 1.0.8.0 [Jul 7, 2008]
- The search function improved.
- The result list of the search contains now the name of the adaptor, if there is any.
Version 1.0.6.0 [Oct 1, 2007]
- Fixed a problem saving the settings for the first time.
Version 1.0.4.0 [Sep 28, 2007]
- Optimized the communication.
Version 1.0.2.0 [Aug 13, 2007]
- Fixed problem on transferring large blocks to old CPUs.
Version 1.0.0.0 [Jul 18, 2007]
- First version. - SSW7, MPI programming adapter700-751-1VK21RS232
- SSW7-USB, MPI programming adapter USB700-755-1VK21SSW7-USB, MPI programming adapter USB
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit Changelog: Firmware, SSW7 and SSW7-USB 676 B - SSW7-RK512, MPI-Adapter mit RK512-Protokoll700-751-5VK21SSW7-RK512, MPI adapter
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SSW7-RK512, Firmware-History 397 B - SSW7-RK512, MPI-Adapter mit RK512-Protokoll700-752-5VK21SSW7-RK512, MPI adapter with RS422 interface
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SSW7-RK512, Firmware-History 397 B - SSW7-HMI, MPI adapter with HMI protocoll700-751-9VK21SSW7-HMI, MPI adapter with HMI protocol
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit Changelog: SSW7-HMI, Firmware-History 394 B - SAS 341-1700-341-1CH021 x RS422/RS485
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SAS 340/341, Firmware History 1 KB - SAS 341-2700-341-2AH022 x RS232, 2 x USB
SHTools, für Windows 7/8/10 32/64 Bit 3.89 FW6 6 MB History ========================
(SHTools) Versionsgeschichte
========================v3.89 fw6
- Update Firmware for NETLink PRO v2.70 Family
- Update Firmware for NETLink PRO v2.70 Compact
- Update Firmware for NETLink USB v2.70 Compact
v3.89 fw5
- Update Firmware for NETLink PRO v2.68 Family
- Update Firmware for NETLink PRO v2.68 Compact
- Update Firmware for NETLink USB v2.68 Compact
v3.89 fw4
- Update Firmware für NETLink PRO v2.66 Family
- Update Firmware für NETLink PRO v2.66 Compact
- Update Firmware für NETLink USB v2.66 Compact
v3.89 fw3
- Update Firmware für NETLink PRO v2.64 Family
- Update Firmware für NETLink USB v2.64 Compact
v3.89 fw2
- Update Lizenztexte
v3.89 fw1
- Update Firmware für NETLink PRO v2.62 Family
- Update Firmware für NETLink PRO v2.62 Compact
v3.89
- Adobe PDF Viewer aus Source gelöscht
- eingebaut direkter Aufruf an das Betriebssystem für PDF Anzeige
- Update Firmware für NETLink PRO v2.60 Family
- Update Firmware für NETLink PRO v2.60 Compact
v3.88 fw4
- Software Zertifikat für dieses Programm erneuert
v3.88 fw3
- Update Firmware für DP/DP-Koppler v1.40
v3.88 fw2
- Update Firmware für NETLink USB v2.56 Compact
v3.88 fw1
- Fixup Firmware für PAS 153 v1.70
v3.88
- Validierung von TCP/IP im Dialog
- Menuanpassungen für Artikelbezeichnungen
- Update Firmware für NETLink PRO v2.54 Family
- Update Firmware für NETLink PRO v2.54 Compact
- Update Firmware für NETLink USB v2.54 Compact
v3.87 fw3
- Fixup Firmware für PAS 153 v1.66
v3.87 fw2
- Update Firmware für PAS 153 v1.66
- Update Firmware für SAS 340
- Update Firmware für SAS 341
v3.87 fw1
- Update Firmware für SSW7-TS PRO v4.10
v3.87
- Fernupdate Option für TCP/IP
- Update Firmware für SSW7-PC v3.40
- Update Firmware für SSW7-RK512 v2.09
- Update Firmware für SSW7-TS PRO v4.08
- Update Firmware für NETLink PRO v2.52 Family
- Update Firmware für NETLink PRO v2.52 Compact
- Update Firmware für NETLink USB v2.52 Compact
v3.86
- Modifikationen für GSM Modems
v3.85
- Modifikationen für OEM Fähigkeiten
v3.84 fw1
- Rechte bei Setup für User werden überprüft
- Update Firmware NETLink USB v2.50 Compact/Family
- Update Firmware NETLink PRO v2.50 Compact/Family
v3.84
- Produktauswahl beim Start hinzugefügt
- Remote Update über GSM bei SSW7 Produkten disabled
v3.83 fw1
- Update Firmware für NETLink USB v1.61
- Update Firmware für NETLink PRO v1.61
v3.83
- Update Firmware für PAS 153 v1.64
- Update Firmware für SAS 341 v1.17
- Modification für INI-Behandlung unter Win7
v3.82
- Fixpack für Artikel-Root Auswahl
- Update Firmware für NETLink USB Compact v2.37
v3.81 fw1
- Update Firmware für NETLink PRO Compact v2.37
- Update Firmware für NETLink PRO Family v2.37
v3.81
- Update Firmware für SAS 340
- Update Firmware für SAS 341
- Einfügen: Update Support für DP/DP-Koppler
- Einfügen: Info über GSM Modems
v3.80 fw1
- Update Bootloader für NETLink USB Compact
v3.80
- Timeout für NETLink USB einstellbar über INI
- unterstützt jetzt Treiber DriverX und WinUsb
- Update Firmware für EIB 300 v1.02
- Update Firmware für NETLink USB Compact v2.36
- Update Firmware für NETLink USB v2 v2.36
- Update Firmware für NETLink PRO Compact v2.36
- Update Firmware für NETLink PRO Family v2.36
v3.72 fw3
- Update Firmware für NETLink USB Compact
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
v3.72 fw2
- Update Firmware für EIB 300 v1.01
v3.72 fw1
- Anpassungen Firmware für SSW7-TS PRO v4.07
Nur für interne Prüfungen
v3.72
- Update Firmware für SSW7-HMI
- Update Firmware für NETLink USB
- Update Firmware für NETLink PRO Compact
- Update Firmware für NETLink PRO Family
- Anpassungen für FTDI Diagnose
- Anpassungen für PAS 153 viBlu
v3.71
- Update Firmware für NETLink USB und PRO Classic wegen neuer Flash-Chip's
- Anpassungen von Texten im Infobereich
- Anpassungen der Speicherroutine für SSW7-RK512 v1
v3.70 fw8
- Update Firmware für SAS 340
v3.70 fw7
- Update Firmware für NETLink PRO Compact
v3.70 fw6
- Update Firmware für NETLink PRO Family
v3.70 fw5
- Update Firmware für SSW7-HMI
v3.70 fw4
- Update Firmware für NETLink PRO Family
- Update Firmware für SAS 340/341
v3.70
- setzen des Ländercode bei analogen Modems
- Erkennung des neuen Modem-Type bei GSM
- Auswahl-Positionierung nach Update bei TCP koorigiert
- Update Firmware für NETLink PRO Family
- Update Firmware für SSW7-PC/TS
- Update Firmware für SSW7-HMI
- Update Firmware für SAS 340
v3.67
- Produkte mit FTDI-Chipset in Menüliste für Info und Update aufgenommen
- Update Firmware für NETLink PRO Family V2.20
- Update Firmware für NETLink USB Family V2.20
- Update Firmware für NETLink USB Compact V2.20
v3.66
- interne Produkttabellen angepasst
v3.65
- Mehrmaliges suchen von Schnittstellen während einer Sitzung kann jetzt vom Benutzer abgebrochen werden
- Menü erweitert für NETLink PRO Family
- Menü erweitert für NETLink USB Family
- "NETLink WLAN" wurde in die "NETLink PRO Family" aufgenommen
- Update Firmware für NETLink PRO Family v2.15
- Update Firmware für NETLink USB v1.57
- Update Firmware für SSW7-TS PRO v4.05
v3.64 fw05
- Update Firmware für NETLink WLAN v2.14
v3.64 fw04
- Update Firmware für NETLink WLAN v2.13
v3.64 fw03
- Update Firmware für NETLink PRO v1.56
- Update Firmware für NETLink WLAN v2.12
- Update Firmware für SSW7-RK512 v2.08
v3.64 fw01
- Update Firmware für SSW7 Familie v3.28 (nicht PRO Variante)
- Timeout bei Fernupdateroutine angepasst
v3.63
- Dialog für Reset Passwort für NETLink
- Update Firmware für NETLink PRO v1.54
- Update Firmware für SSW7-TS PRO v4.04
- Update Firmware für SSW7-TS v3.27
v3.62
- Update Firmware für NETLink PRO v1.53 und SSW7-TS PRO v4.02
v3.61
- Stationsname beim SSW5-Lan kann gespeichert werden ohne das die IP-Parameter geändert werden
v3.60
- Dialoge für MDM300 modifiziert
- Ländercode kann jetzt beim MDM300 direkt gesetzt werden
- für RK512 v2.07 hinzugefügt (stabileres Anlauf- und Betriebsverhalten)
- für SSW7-TS PRO v4.01 hinzugefügt
v3.54
- Dialoge für MDM300 hinzugefügt
- Dialoge für SSW7-TS PRO hinzugefügt
- Menü für MDM300 und SSW7-TS PRO erweitert
v3.53
- für NETLink PRO wurde Firmware v1.52 hinzugefügt
- verbesserte Anzeige für erreichbare Teilnehmer
v3.52a
- für NETLink PRO wurde Firmware v1.51 hinzugefügt
v3.52
- Anwahl der Schnittstellen Suchmethode überarbeitet
v3.51a
- für NETLink PRO wurde Firmware v1.50 hinzugefügt
v3.51
- die Funktion NETLink Parametrieren wurde so umgebaut das sie nicht mehr über das TCP- sondern nur über das UDP-Protokoll funktioniert, dadurch kann man einen NETLink der "irgendwo" ist wieder so reparieren das er für die Anwendung z.B: Explorer mit WEB-Frontend zur Verfügung steht
- Dialog Einstellung erweitert
- die serielle Schnittstellenüberwachung kann jetzt über den Dialog ein-/ausgeschaltet werden
- für die Suche der seriellen Schnittstellen kann jetzt ein erweiterter Modus angewählt werden
- es kann zusätzlich eine serielle Schnittstelle fest vorgegeben werden, diese wird aber dann nur angezeigt wenn ein erfolgreiches Öffnen auch möglich war
- der Dialog für den SSW5/Lan Adapter wurde erweitert, sodass man jetzt dem Adapter einen eindeutigen Namen geben kann mit dem er im Netzwerk gesucht werden kann
v3.50b
- neue Firmware für SSW7 PC / TS v3.25
v3.50
- neues Auswahlmenü für Produkte
- neues Auswahlmenü für Schnittstellen
- Enable/Disable Auswahlmenü's während Update
- MDM300 Produkte neu ausgenommen
- Schnittstellenüberwachung aktiviert
- Diagnose für NETLink PRO
- Konfigurations-Dialog für NETLink PRO
- neuer Updatemechanismus für NETLink family
- neue Firmware/Bios für NETLink v1.42
v3.21
- VISTA Kompatiblität
- Benutzerhilfe während der StartUp-Phase
- SSW5/Lan Parameterdialog ergänzt
v3.20
- Passwortfunktionalität ergänzt
- SMS-Versand Dialog für TS300 korrigiert
v3.19
- MSN Init/Verwaltung für ISDN erweitert
- Anwahlverfahren bei Remote angepasst
- Pfadstrukturen für Binärdatein erweitert
v3.18
- Anzeige der Buildversion bei "Beta" eingebaut
- Verbesserung beim Lesen der INI in Bezug auf RK512 ohne BCC
- Zurückschreiben der Parameter in den Adapter korrigiert
- Steuerbits beim TS300 jetzt modemunabhängig
- logische Abläufe bei den Steuerwegen für TS300 angepasst
v3.17
- Steuerung für TS300 von Modem- auf Steuerbefehle umgestellt
- Anpassungen im Zusammenhang mit der automatischen Prüfung QSv3.34
- serielle Schnittstelle wird jetzt immer neu initialisiert bevor versucht wird die Parameter in den Adapter zu speichern
- LOG-Funktionen für Diagnose mit NETLink PRO eingebaut
v3.16
- Excludefunktion für die serielle Schnittstellesuche eingebaut
- SMS-Versand Dialog für TS300
v3.15
- serielle Schnittstellen-Verwaltung erneuert
- RK512 ohne BCC eingebaut
- bei der Modemsteuerung die verschiedenen Modelle unterscheidenSHTools, für Windows 7/8/10 32/64 Bit SAS 340/341, Firmware History 1 KB - TB20 ToolBoxXXX-XXX-XXXXXTB20 ToolBox
TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - TB20-C, bus coupler600-185-1AA11EtherCAT
TB20, ESI File for EtherCAT bus coupler 1.06.004 74 KB TB20, ESI File for EtherCAT bus coupler TB20-ToolBox V2 Setup V2.10.008 29 MB History =================================
(TB20-Toolbox ) Firmware history
=================================V2.10.008 30.03.2022
- New TB20 Ethernet/IP coupler firmware V1.12.004
- Updated Windows CDC drivers 1.34V2.10.006 02.02.2021
- New TB20 PROFINET coupler firmware V1.70.002
- Minor bug fixes
V2.10.004 12.11.2020
- Ethernet diagnostics for the Ethernet/IP coupler
- New TB20 Ethernet/IP coupler firmware V1.12.000
- Documentation print now contains image of the system with dimensioning
- Minor bug fixes
V2.10.002 09.09.2020
- Ethernet diagnostics for the modbus coupler
- New TB20 Modbus coupler firmware V1.10.002
- Minor bug fixes
V2.08.004 12.08.2020
- New TB20 Modbus coupler firmware V1.06.000
V2.08.002 12.05.2020
- Issue fixed: Projekt export generated empty file.
V2.08.000 28.04.2020
- New TB20 ECAT coupler firmware V1.06.004
- New TB20 EtherNet/IP coupler firmware V1.10.000
- New TB20 CANopen coupler firmware V1.16.000
- Performance improvement
- Issue fixed: Elements of gui corrected
- New function: Update functionality for TB20 coprocessors prepared
V 2.06.000 07.11.2019
- New TB20 PROFIBUS coupler firmware V1.36.000
- New TB20 PROFINET coupler firmware V1.70.000 with PROFINET coprocessor FW V1.6.2.5
- New function: Simultaneous update of PROFINET coupler firmware and of PROFINET coprocessor integrated
- Issue fixed: Displaying a notification message if a coupler can´t be updated due to incompatible firmwareTB20-ToolBox, TB20, Toolbox - Screensharing130-644-TEAMVScreensharing tool Teamviewer
- myREX24 V2 Free-AccountmyREX24 V2 Free-AccountmyREX24 V2 Free-Account
shDIALUP (Windows 7; Windows 8; Windows 10) 3.9.R0.5 69 MB History =============================================================
(shDIALUP) History of the Versions for router (700-87x-xxxxx)
=============================================================V 3.9.R0.5 08.07.2021
Changelogs:
[DIALUP-23] - [Bug: MB-828] Security fix
[DIALUP-24] - [Bug: MB-829] Security fix
Bugfix:
[DIALUP-8] - [Support] BUGS-130 - Zugriffsverletzung Dialup
[DIALUP-19] - [Test: DIALUP-10] [Support] BUGS-138 - shDIALUP friert ein nach Eingabe eines Benutzers ohne "@"
[DIALUP-20] - [Test: DIALUP-9] [Support] BUGS-132 - OpenVPN.log bei shDIALUP V3.9 R0.2 nicht vorhanden
[DIALUP-21] - [Test: DIALUP-11] [Support] BUGS-181 - addtap.bat verweist auf nicht vorhandene OemWin2k.inf
V 3.9.R0.1 08.08.2019
- new menu "Create Supportinformation" at Info-Button. All Logfiles will be packed in ZIP file
- new menu "Open Data Directory" at Info-Button.It opens the Explorer at your Data Directory File location.
- Check for Updates in INI disabled
- separate Appdata Installation path for all users or single user
- fix HTTP-Proxy connection. (use of OpenVPN 2.3.18 since 2.4.x has community confirmed issue with HTTP-Proxy)
load Chrome DLL libcef.dll from absolute installation path to not conflict with other installations.
- Bluescreen when accessing VCOM. Driver update from V7 to V9.
- new Chromium Version 74.0.3729.131 and CEF4 for internal browser improvements
- fix Auto-Login in shDIALUP
- fix OpenVPN 2.4.5 issue regarding auto-proxy
- Update TAP Driver 9.0.0.21 (Version 9.21.2)
- Default Setting "Override IE automatic proxy search settings" is now FALSE
- Freeze after "Connect after programstart (username and password must be specified in the serverlist)" if Username or Password was not given
- update integrated Browser with (CEF 3.3538.1848.g1d1fe01 which includes Chromium 70.0.3538.77)
- corrected some typos on settings page
- if there was a "." in the device name while configuring through network, the transfer failed. Now "." are allowed.
- Sometimes an error occured while downloading configration file to the computer
- Sometimes software freezed after Exit
- corrected typo in installation routine
- If "conftool" option was disabled, the configuration process through network didn't finished
- add check for updates function at menu "info"
- Funktion to check for updates added. See Icon "Info" and submenu "Check for updates"
- TLS Cipher given to OpenVPN configuration
- auto-logout from Server when exiting shDIALUP
- The option "Override IE" is now default = FALSE
V 3.7.R1.0 03.02.2017
- shDIALUP freezes after uploading a file
- "I forgot my password" function has been reactivated
- When using the V1 portal, the disconnection did not work properly
- No error message when starting the software
- When closing, an error came up sporadically
- Display error when a dropdown menu is opened and the shDIALUP window is moved fixed
- Sporadically VPN authentification error fixed
- SEARCHoverIP function integrated
V 3.6.R0.0 30.09.2016
- In addition to the server selection V1 also the address of Portal V2 is now selectable
- official release for Win 10
- Error Message when Username is wrong is now in more detail
- Login for Google Auth possible
- Integrate USB-over-IP Function
V3.4 R0.0 13.05.2015
- A second start of the software will now be prevented
- It is now possible to refresh the user interface by clicking the F5 button
- enhance the error message when the installer detects a second instance of shDIALUP
- disbale plugins for the integrated browser to prevent from Adware
- Fix error with white or black screens after login or starting of shDIALUP
- Check the availibility of the TAP-Windows Adapter V9
- Automatic Proxy Settings search could now be disabled
- Proxy settings of the IE were overwritten
V3.1 R0.0 25.07.2014
- The module VCOM LAN2 has been integrated - the virtual COM ports are automatically searched for and assigned
- A newer version of Chromium browser is in use (CeF3)
- Scan and configuring devices directly via LAN is possible now
- Supports Windows 8 32/64
- Automatic discovery of proxy server in the Internet Explorer is now suppressed, so that the loading time of shDIALUP is faster.V2.0 R0.8 25.11.2013
- DNS connection name changed because of performance and connection problemsV2.0 R0.6 01.07.2013
- Integrated Browser improovments
- ini Files will no longer deleted at software updateV2.0 R0.2 13.02.2013
- Troubleshooting: Sporadic re-display of login box after dial-in
- Troubleshooting: Proxy settings are not applied
- Troubleshooting: Termination after login with incorrect login information is now displayed with an error message
- Improvment: Menu buttons located in the network information dialog removedV2.0 R0.1 01.02.2013
- Complete GUI rebuild for better usability
- Some improvements under Windows 7V1.1 R0.5 02.05.2011
- improvement for additional proxy server connections
- OK button text changed to "Go back to taskbar"
- direct connection init after program start can now be activated in the settings menuV1.1 R0.4 07.12.2010
- improvement for proxy server connectionsV1.1 R0.2 02.11.2010
- 1st releaseREX 100, Firmware 2.2.11 14 MB History Version 2.2.11 (07.04.2022)
***************************************************************************************************************
Bugfix
[MINI-75] - Cellular connections didn´t work while using connect on demand (digital input or Function button)***************************************************************************************************************
Version 2.2.10 (14.03.2022)
***************************************************************************************************************
Optimization
[MINI-74] - DNS-Server negotiation with mobile service provider optimized
[MINI-73] - (2.2.9) Increase timeout for cellular network-test***************************************************************************************************************
Version 2.2.8 (08.12.2021)
***************************************************************************************************************
Bugfix
[MINI-71] - DNS server entries were in wrong order
[MINI-72] - Old assigned DNS server from DHCP weren´t deleted***************************************************************************************************************
Version 2.2.7 (02.09.2021)
***************************************************************************************************************
Bugfix
[MINI-68] - [Bug: MB-897] VPN connection problem after factory reset and configuration
[MINI-69] - [Bug: MB-899] Occasional connection loss of cellular connection which won´t reconnectOptimization
[MINI-54] - Implement new cellular Modem for EU
[MINI-55] - Implement new cellular Modem for AT&T NA***************************************************************************************************************
Version 2.2.5 (13.08.2021)
***************************************************************************************************************
V2.2.3:Bugfix
[MINI-56] - Hard coded WLAN SSID was shown, if no connection was possible
[MINI-58] - WiFi Channel expanded to 1 - 13
[MINI-59] - The input settings of I/O 1 and 2 wasn´t displayed correctly in the Quickstart
[MINI-60] - No WiFi connection if AP set to WPA/WPA2 and Encryption = AutomaticOptimization
[MINI-61] - More information on scanned WiFi APsV2.2.4:
Bug
[MINI-63] - VPN reconnect failed at times when testping failed
[MINI-64] - NTP service didn´t start under certain circumstancesOptimization
[MINI-65] - Debug logging optimized (LUA library messages removed)
[MINI-66] - Logging optimized by adding more information on DHCP processV2.2.5:
Bug
[MINI-67] - Occasionally so WiFi connection to iPhone hotspot and other various APs (No IP address via DHCP)
***************************************************************************************************************Version 2.2.2 (14.06.2021)
***************************************************************************************************************
Optimizations:
[MINI-52], [MINI-53] - Internal system adjustments for simply-connect integration
[MINI-49] - Internal system adjustmentsBugfixes:
[MINI-50] - Quickstart Web-GUI: Wrong display of open Ports Ports 80,443,1194
[MINI-40] - Identical USB-Ident on the USB host connection together with the built-in modemFeatures
[MINI-48] - Integration of Simply-Connect
[MINI-46] - mbCONNECT24 Serverlist update
[MINI-47] - DHCP DNS Servers is used before the DNS from settings. Priority change.
[MINI-43] - Update CI (Logo, Color)
[MINI-45] - Update WLAN application and Hardware compatibility
[MINI-44] - Status API without Login***************************************************************************************************************
Version 2.0.8 (30.04.2020)
***************************************************************************************************************
Bugfixes:
* [MINI-27] - MDH867 optimise Failover WAN/WLAN/GSM
* [MINI-32] - pppd Vulnerability CVE-2020-8597Features:
* [MINI-24] - optimise WLAN with setting: without internet monitoring
* [MINI-29] - Support für Telit Modem LE910NAG V2
* [MINI-34] - Optimise Failover switching time***************************************************************************************************************
Version 2.0.6 (18.11.2019)
***************************************************************************************************************
Bugfix:
[MINI-8] - [Support] BUGS-106 - Problem mit UMTS Modems***************************************************************************************************************
Version 2.0.4
***************************************************************************************************************
Bugfix:
[MINI-9] - Speichergrenze des Speicherbereich "Config" des Flashs wird erreichtFeature:
[MINI-5] - [Feature] FIMA-78 - Unique-Password Funktionalität bereitstellen
[MINI-7] - [Feature] FIMA-43 - Anzeige, wie mbNET verbunden ist (WAN, modem)
[MINI-10] - Abfrage HWVERSION und STAT_INET in communication.sh eingebaut***************************************************************************************************************
Version 2.0.3 (25.07.2019)
***************************************************************************************************************
Bugfix:
- [MINI-2] - fixed CTM with proxyAdd:
- #4046: new WIFI Modul support RALink 5370
***************************************************************************************************************Version 2.0.1 (11.04.2019)
****************************************************************************************************************
Bugfix:
#3953: Email sending was not working
#3957: Failover back from Modem to WAN was not working when Modem was initializing state
#3955: preset Modem connection regardless of configuration
***************************************************************************************************************Version 2.0.0 (01.04.2019)
****************************************************************************************************************
Security:
#3926 : Security update (openvpn, openssl, WEB logout)Bugfix:
#3933 : fix SearchoverIP with Beckhoff, Schneider, Pilz
#3401 : WLAN-Gateway was shown wrong at Quickstart page
#3387 : Fix PROFINET Communication between LAN-Port 4 and LAN-Port 1 to 3
#3339 : Forwarding rules were not deleted with new configuration
#3309 : Data24 download only when device is online
#3308 : wrong Firewall rule for USBOverIP when it was inactive
#3306 : fix kernel oops tty_buffer_request_room
#3295 : Firewall Forwarding: LAN IP's were accepted despite Firewall from WAN>LAN
#3234 : no access via SFTP to USB memory
#3160 : boot process tooks more than 10 minutes when WAN was static IP-Address and no cable plugged in
#2931 : improvement of failover and monitoring
#2828 : WLAN Encryption method was not taken over while setup thru Quickstart
#2781 : Memory overflow with Hardwareversion 0Feature:
#3929 : add SNAT for LAN to WAN
#3928 : add SimpleNAT
#3927 : add Selectable Interface for Firewallrules
#2868 : show MAC-Addresses on Quickstart page
#2717 : delete conntrack Filter each firewall reset
#2516 : add Ignore traffic setting for LAN and local Services
#3310 : Firmwareversion is also shown in syslog now***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Increased the GSM-timeout
#2828: Improved the WLAN firststart
#2840: Improved the re-connection of the devices
#2739: A text document with detailed information will be created after a configuration download to the device fails because of a wrong configuration fileImprovements:
#2680: Masquerading
#2717: Conntrack filter will be flushed after every firewall restart
#2750: Authentication method for proxy users added
SEARCHoverIP function implemented***************************************************************************************************************
Version 1.9.0 (29.11.2016)
****************************************************************************************************************
Bugfix:
#2835: Timeout für GSM-Verbindung erhöht
#2828: Firststart Anpassung für WLAN
#2840: Anpassung des Wiederverbindungsaufbaus
#2739: Verhalten bei Fehlerhaften aufspielen der Konfiguration optimiertVerbesserung:
#2680: Masquerading
#2717: Firewall wird nach Neustart gelöscht
#2750: Authentifizierungsmethode beim Proxy Benutzername
SEARCHoverIP Funktion implementiert****************************************************************************************************************
Version 1.8.1 (07.07.2016)
****************************************************************************************************************
Bugfix:
major Bugfix regarding USBoverIP****************************************************************************************************************
Version 1.8.0 (30.06.2016)
****************************************************************************************************************
Bugfix:
#2357: after activating USBoverIP no configtransfer via USB possible
#2358: after activating USBoverIP USB was mounted for SFTP****************************************************************************************************************
Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: Anpassung des Quickstarts
#1914: Anpassungen beim ZeitabgleichVerbesserung:
USBoverIP funktion hinzugefügt
****************************************************************************************************************Version 1.7.0 (21.04.2016)
****************************************************************************************************************
Bugfix:
#2173: improved the quickstart
#1914: improved the time-adjustingImprovements:
Included USBoverIP function
************************************************************************************************************************************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS Anzeige war Fehlerhaft
#2205: Übersetzungsfehler Deutsch <> Englisch
#2204: Befehle auf Diagnose Seite konnten nicht ausgeführt werden
#2171: Sicherheitslücke (CVE ID: CVE-1999-0524) geschlossen
#2207: Bei Fehlermeldung am Gerät wurde die falsche IP-Adresse angezeigtVerbesserung:
#2176: Allgemein: Diagnose Seite implementiert
********************************************************************************************************************************************************************************************************************************
Version 1.6.0 (29.03.2016)
****************************************************************************************************************
Bugfix:
#2206: DNS information was not correct
#2205: Wrong translations German <> English
#2204: Commands on the Diagnostics page couldn´t be executed
#2171: Security vulnerability (CVE ID: CVE-1999-0524) fixed
#2207: After an error message on the device, the wrong IP address was shownImprovements:
#2176: General: Diagnostics page implemented
********************************************************************************************************************************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Verbindung wurde unter bestimmten Umständen selbstständig aufgebaut
#2127 VPN: Monitoring verhinderte Verbingsaufbau
#1660 VPN: VPN Verbindung bei Eingang 1 funktionierte nur sporadisch
#2130 Firewall: NAT Funktionlität optimiertVerbesserung:
Allgemein: Kompatibilität mit WLAN (MDH863) und LTE (MDH862) Geräten****************************************************************************************************************
Version 1.5.0 (08.02.2016)
****************************************************************************************************************
Bugfix:
#2128 VPN: Connection has been established in spite of "on demand"
#2127 VPN: Monitoring prevented VPN connection
#1660 VPN: built sporadically a VPN connection at input 1
#2130 Firewall: NAT functionality optimizedImprovements:
General: Compatibility with WiFi (MDH863) and LTE (MDH862) devices****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Anzeigefehler im Quickstart
#1658, #1825, #1525 Allgemein: Anpassen des blinkverhaltens der CON LED
#1436 VPN: SMS Befehl eingefügt
#1306 NTP: Anpassen der Uhrzeit bei deaktiviertem NTP
#1524 Modem: Unterbinden eines PPP Neustarts
#1899, #1837 VPN: Gerät kam nach Verbindungsabbau erneut online****************************************************************************************************************
Version 1.4.0 (18.08.2015)
****************************************************************************************************************
Bugfix:
#1819, #1286, #1039 Web-GUI: Displayerror at the Quickstart
#1658, #1825, #1525 Allgemein: Adjusting the CON LED blinking behavior
#1436 VPN: Inserted SMS command
#1306 NTP: Adjust the time if the NTP is disabled
#1524 Modem: Prevent PPP restarts
#1899, #1837 VPN: Device came back online after disconnection****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: Kein Verbindungsaufbau wenn Username bei APN leer
#989 VPN: VPN-Verbindung brach unter bestimmten Umständen ab
#1243 NTP: Keine Verbindung bei blockiertem NTP-Port
#1258 Allgemein: Das connection monitoring war nicht abschaltbarVerbesserungen:
#1117 Firewall: Anpassungen an der Firewall
#1233 Allgemein: Dienste gepatcht****************************************************************************************************************
Version 1.3.0 (01.04.2015)
****************************************************************************************************************
Bugfix:
#1116 Modem: No internetconnection if the APN username was empty
#989 VPN: VPN connection got lost in certain cases
#1243 NTP: No connection if NTP port was blocked
#1258 General: Connection monitoring wasn´t defeatableImprovements:
#1117 Firewall: Firewall improvements
#1233 General: Patched some services****************************************************************************************************************
Version 1.2.0 (28.11.2014)
****************************************************************************************************************
Bugfix:
#1021 CTM: Proxy server will be used as testserver whenever internetconnection is via external router (WAN)
#1014 CTM: CTM now uses only IPV4 DNS request
#1000 LAN: now supporting 10MBIT/s devices connected to LAN
#994 CTM: CTM ignored Proxy setting
#993 LAN: switch through Port 3 and 4 was not workingImprovements:
#1027 Web-GUI: Icon Step 3 is now signed as green whenever NTP service was not started before (NTP icon is gray)****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Category: Firmware mbNET.mini
Version: 1.1.2Bugfix:
#896 Modem: With SIM-cards from different providers (o2, E-Plus, Vodafone) the ISP hasn´t given a local IP address. In the logfile the error message "Could not determine local IP address" appeared, consequently the device couldn´t establish an internet connection. This has been fixed in this version.Improvements:
#891 General: Close a security gap
#856 Update: The firmware file will also be accepted in a <Firmwarename>_<Version>.sbs format****************************************************************************************************************
Version 1.1.2 (22.09.2014)
****************************************************************************************************************
Kategorie: Firmware mbNET.mini
Versionsnummer: 1.1.2Bugfix:
#896 Modem: Bei SIM-Karten von verschiedenen Providern (o2, E-Plus, Vodafone) wurde vom ISP keine lokale IP-Adresse vergeben. Im Logfile erschien die Fehlermeldung "Could not determine local IP address", infolgedessen konnte keine Internetverbindung hergestellt werden. Dies wurde in dieser Version behoben.Verbesserung:
#891 Allgemein: Schließen einer Sicherheitslücke
#856 Update: Die Firmwaredatei wird nun auch im Format <Firmwarename>_<Version>.sbs akzeptiert****************************************************************************************************************
Initial Firmwareversion: 1.1.1
****************************************************************************************************************REX 100, Firmware REX 2x0, Firmware 7.2.3 18 MB History REX200/250 Changelog
Version Changes
7-2-3 Bug
[NERO-304] - Firmware update not possible on certain hardware due to invalid hardware-compatibility-check7-2-2 Bug
[NERO-300] - Docker Hub API updated from V1 to V2
[NERO-303] - SIM card initialization process optimized after soft reboot7.2.1
[NERO-298] - [Bug: MB-1022] Set hostname permanent even after a reboot
[NERO-299] - [Bug: MB-1023] Failure during Modem start if there is an empty SIM Tray inserted in the primary SIM Socket7.2.0
Bugfixes
[NERO-271] - [Bug: MB-881] It is no longer necessary to restart the device after adding a host entry.
[NERO-289] - [Bug: MB-995] On demand VPN connection to portal is disconnected if local device time is changed while connecting
[NERO-290] - [Bug: MB-978] If time synchronisation fails, the local time of the router is adjusted
[NERO-293] - An unconfigured device cannot open the CC-Online Help
[NERO-297] - Device does not start after firmware updateImprovements
[NERO-255] - Do not restart modem when switching SIM socket
[NERO-273] - Hardening firmware update and configuration import
[NERO-278] - [Verbesserung: MB-763] Some serial settings were not displayed correctly when reopened
[NERO-280] - [Verbesserung: MB-948] A REX should only use IPv4 for OpenVPN communication
[NERO-281] - [Verbesserung: MB-984] Some useful information has been added to the web interface
[NERO-294] - [Verbesserung: MB-1006] Adaptation of channels for OEM devicesFeature
[NERO-115] - [Feature] FIMA-198 - Migration API for V1 portal was improved
[NERO-268] - [Feature: MB-888] Display MNC/MCC number of SIM card
[NERO-284] - [Feature: MB-513] Store device diagnose information locally on USB stick
[NERO-286] - [Feature: MB-556] Log analyzer added on the status page of the device
[NERO-287] - [Feature: MB-886] Preparation for a backup server address in the OpenVPN configuration
[NERO-288] - [Feature: MB-983] Integrate Wake-on-LAN into REX
[NERO-292] - [Feature: MB-1003] Display the uptime of the device on the web interface
[NERO-295] - Add OpenVPN HMAC as option7.1.5
[NERO-291] - [Bug: MB-998] FTP Traffic masquerade through VPN connection (necessary for active FTP server)7.1.4
[NERO-275] - [Bug: MB-959] API raise 500 Internal Server Error7.1.3
Bugfixes
[NERO-269] - [Bug: MB-895] [EXTERNE MAIL] Sporadic loss of PROFIBUS connection
[NERO-270] - [Bug: MB-922] IPsec routing between networks not possible
[NERO-272] - [Bug: MB-573] Make the action "SMS" in alarmmanagement not selectable for devices without modem
[NERO-274] - [Bug: MB-951] sending an SMS with a space in the number can cause the modem to crashImprovements
[NERO-182] - [Support] BUGS-344 - WiFi Quickstart page shows green tick without active WiFi connection7.1.2
[NERO-266] - Slow Data SIM cards led to network problems7.1.1
[NERO-263] - [Bug: MB-902] - Change quickstart permission flag to be compatible with V1 portal
[NERO-264] - [Bug: MB-903] - Update OEM Favicon7.1.0
[NERO-125] - [BUGS-262] - REX does not terminate VPN connection after preset time
[NERO-227] - Applying device configuration via shDIALUP over network ends in an error
[NERO-221] - [Verbesserung: MB-759] - No output for TCPDUMP on Status/Diagnose page on web interface
[NERO-217] - Mosquitto service must be restarted if device API settings have been changed
[NERO-218] - Stop SIMPLY.connect service if USB drive with firmware or configuration is plugged in
[NERO-236] - Broken error message when creating new user with non-matching passwords
[NERO-243] - Changing a user name on device does not work
[NERO-250] - Config partition can be overfilled with backups, which can lead to problems on device
[NERO-251] - Fix upload of own HTTPS certificate for webserver
[NERO-257] - CTM cannot be switched between active and inactive reliably on web interfaceFeatures
[NERO-134] - Mount USB flash drive into NodeRed Container
[NERO-210] - [Feature: MB-519] - Separated user management on device for access on Flows and Dashboards
[NERO-127] - Recreate docker images for NodeRed and Portainer on device WebUI
[NERO-8] - Implement automatic forwarding after changing the LAN IP address of deviceImprovements
[NERO-256] - Revise WebUI appearance for improved usability: Consolidated colors, style and design
[NERO-223] - [Verbesserung: MB-826] - Adapt server list for first start process on device
[NERO-228] - [Verbesserung: MB-822] - The specification of multiple ports in forwarding rules does not work correctly
[NERO-232] - Improve behavior of diagnose actions on web interface and fix timeout problem
[NERO-253] - [Verbesserung: MB-851] - The admin user on a REX device must not be able to be deleted
[NERO-229] - Ignore port settings for ICMP firewall rules on web interface
[NERO-233] - Session handling refactoring for improved security
[NERO-234] - Update JQuery to version 3.6.0
[NERO-237] - Redirect to Quickstart form /login if user is already logged in
[NERO-238] - Force reload of js/css for every new firmware release
[NERO-244] - Remove NodeRed HTTP option for improved security
[NERO-247] - Fix tab scrolling on web interface
[NERO-252] - Update OpenVPN version
[NERO-254] - Avoid mosquitto password generation when starting or stopping Data24
7.0.4
[NERO-258] - Add HW5 compatibility7.0.3
[NERO-245] - [MB-843] - Increase Timeout for SIM communication (Drillisch)7.0.2
[NERO-220] - [Verbesserung: MB-760] OpenVPN setting "Remote maintenance active at: Digital input X (High)" is hidden
[NERO-215] - Portainer.io fix sporadic starting problems7.0.0:
Bugfixes
[NERO-171] - [BUGS-321] - Sporadically failing online connection when plc is connected via USB
[NERO-197] - [MB-757] - Send iSMS triggered from inputs
[NERO-192] - OpenVPN Web-GUI changes regarding key switch
[NERO-193] - Send extra initialization commands to Modem from web-GUI
[NERO-196] - [MB-616] - Write syslog to SD Card fixedFeature
[NERO_168] - [Feature: FIMA-161] - Automatically choose VPN Port between 1194,443,80 if configured
[NERO-177] - [BUGS-338] - Add timezone for Sakhalin (UTC+11)Improvements
[NERO-191] - Update Linux Kernel version of firmware to Version 5.4 LTS
[NERO-202] - Revision of the update process for future firmware versions
[NERO-205] - Update dnsmasq to version 2.836-2-5
Bugfixes
[NERO-126] - [Support] BUGS-234 - fix sporadic modem interrupts
[NERO-163] - [Support] BUGS-296 - Tags for I/O-Manager cannot be deleted on the device interface
[NERO-166] - [Support] BUGS-320 - Cyclic error message for crond in device log: "no such file or directory"
[NERO-167] - [Support] BUGS-298 - Created tags for I/O Manager are not displayed on diagnose site
[NERO-172] - [Support] BUGS-332 - In case of failover (WAN -> modem) the router does not reconnect via WAN, even if Internet via WAN is available again
[NERO-176] - [Support] BUGS-333 - Online e-Mail not readable
[NERO-187] - Rework IoT Firewall rules
[NERO-188] - Set back "connected Users" if OpenVPN connection breaks
[NERO-174] - Adapt timings for modem start-upFeature
[NERO-137] - [Feature] FIMA-164 - Allow special characters (UNICODE) in SMS sent by device6-2-4
Bugfixes
[NERO-76] - EDGE rework Backup-Key functionality
[NERO-81] - [Support] BUGS-155 - LUA script started even if it was disabled
[NERO-83] - TCPDUMP on the diagnosis page in the quick start had no result
[NERO-111] - "Local set time" on web interface was not taken over to device
[NERO-112] - [Support] BUGS-228 - Updating firmware via TFTP menu on the web page didn´t work propely
[NERO-116] - USB-over-IP: Connection to USB devices couldn´t be established sporadically
[NERO-124] - [Support] BUGS-260 - Hide WAN menu in the quickstart at devices without WAN
[NERO-133] - pppd service optimized in the case of an error
[NERO-140] - [Support] BUGS-284 - Component on LAN couldn´t connect to internet in some cases
[NERO-145] - Situation with Failover if WAN plugged but there is no internet connection optimized
[NERO-147] - After synchronization, modem devices sporadically stayed offline if an additional WAN cable with DHCP is connected
[NERO-161] - IoT firewall rules reworkedFeature
[NERO-95] - Make the subject line of alarm emails customizable
[NERO-146] - Protect portainer with Login screen
[NERO-148] - [Feature] FIMA-230 - Connect WIFI to hidden networks6-2-3
Bugfix
[NERO-128] - RKH235: the serial MPI/PROFIBUS menu was hidden on local Web-GUI
[NERO-130] - Fix pppd Vulnerability CVE-2020-8597
[NERO-131] - CTM takes longer because of dockermanagement firewall settings6-2-1
Bugfixes
[NERO-117] - [Support] BUGS-242 - Cannot connect to Device web-gui via web2go6-2-0
Bugfixes
[NERO-53] - Ignore traffic on LAN blocks internet access on connected PC
[NERO-97] - Alarm management: configuring internet SMS as alarm is not possible on device webinterface
[NERO-99] - [Support] BUGS-91 - Failover doesn't work when internet on WAN fails because of internet problems
[NERO-101] - WAN routes are not created on device webinterface
[NERO-103] - Device cannot connect to internet via wifi, when there is a WAN cable plugged in
[NERO-104] - Simply connect stops working, when a