Counter, 32 Bit
1x 24V, 500 kHz

Counter, 32 Bit

Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that therefore need to be pre-processed.

Features

Reset selection
€207.82 *
  • Order number: 600-300-7AA01
Description Technical Specifications Download
Description
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals... more
Close menu
Counter, 32 Bit 1x 24V, 500 kHz

The counter module detects the edges of 24 V signals as pulses. The impulses can be counted or converted into a frequency, rotational speed, or period. The counter module features an additional 24 V input and a 24 V output for a direct response to start pulses and to quick system state changes.

Capturing modes

Pulse & direction
Rotary encoder with single evaluation
Rotary encoder with double evaluation
Rotary encoder with quadruple evaluation

Counting methods

Continuous counting
Once-only counting
Periodic counting

Measuring mode

Frequency measurement
Rotational speed measurement
Period measurement

Programmable input

PLC input
Approval (HW gate)
Synchronization
Periodic synchronization
Latch
Latch & retrigger
Can be inverted

Programmable output

PLC output
Count >= Reference value
Count <= Reference value
Count = Reference value
Can apply a substitute value at STOP

Note: Individual modules cannot be combined with the IO systems of other manufacturers.

  • 32-bit counter
  • Up to 500 KHz (4-fold evaluation)
  • Accommodates 24 V incremental encoders and proximity sensors
  • Filters: 10 kHz | 50 kHz | 100 kHz | 500 kHz
  • All inputs can be inverted
  • Limits for counter and measured readings
  • Hysteresis for input
  • Pulse duration for output
  • Refresh rate / averaging time for measuring mode
  • 8 bytes of input data (count and status)
  • 8 bytes of output data (preset count and commands)