NETLink®

The devices of the NETLink® family serve the purpose of programming, configuring, and visualizing S7 PLCs.

NETLink® PRO PoE, PROFIBUS Ethernet Gateway

NETLink® PRO PoE, PROFIBUS-Ethernet-Gateway
NETLink® PRO PoE, PROFIBUS-Ethernet-Gateway

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices.
The integrated web interface offers parameterization, diagnostic, and security features, and for functional enhancements, the user can use our free diagnostic software SHTools to, for example, automatically perform firmware updates. The latest version is available for download.

It draws its supply voltage through the CPU of the automation device, or optionally via externally supplied DC 24 V, or a CAT5 network cable using a PoE power supply unit.
The NETLink® PRO PoE enables the implementation of TCP/IP on the MPI/PPI/PROFIBUS with up to 32 simultaneously open connection channels. With the switchable single-master operation, passive bus participants can be addressed. The integration of SCADA, HMI, and OPC applications is possible via the widely used ISO on TCP (RFC 1006) protocol.
The applications are automatically detected and forwarded by the NETLink® PRO PoE.

  • RFC 1006 (ISO on TCP)
  • CPU-to-CPU communication (with S7-300* and S7-400*)
  • Support for all common S7 engineering tools
  • Dynamic address assignment using DHCP
  • Security functions for securing TCP/IP access
  • Switchable PLC write protection
  • Up to 16 TCP connections
  • Up to 32 MPI/PROFIBUS connections
  • Easy configuration via web interface
  • Variables can be monitored in a browser window
  • Support for slave configuration
  • Electrical isolation for MPI/PPI/PROFIBUS
  • MPI/PPI/PROFIBUS from 9.6 kbps to 12 Mbps
  • For S7-200*, S7-300*, S7-400*
  • Powered Device (PD) as defined in IEEE 802.3af (POE) and 802.3at (POE+)

Download PDF datasheet
General information
Order number 700-881-MPI21
Article name NETLink® PRO PoE
Scope of delivery NETLink® PRO PoE , 3m Ethernet cable, Quick Start Guide, CD with software, and manual
Dimensions (DxWxH) 102 x 54 x 30 mm
Weight Approx. 180 g
Communication interface
Number 1
Type 10 Base-T
100 Base-TX
Transmission rate 10/100 Mbps autom. detection
Physical layer Ethernet
Protocol FDL, RFC 1006
Connection RJ45
MPI/PPI/PROFIBUS interface
Number 1
Type RS485, isolated
Transmission rate max. 12 Mbps autom. detection
Connection SUB-D male connector, 9-pin. with PG interface and repeater
Status indicator 3 LEDs, 2 of them bi-color
Voltage supply 24 V DC, 18–30 V DC
Current draw Max. 150 mA with DC 24 V
Ambient conditions
Ambient temperature 0 °C ... +60°C
Transport and storage temperature -20 °C … +80 °C
Relative air humidity 95 % r H without condensation
Pollution degree 2
Protection rating IP20
Certifications CE
CE
RoHS Yes
REACH Yes

Software

 Name Version Size History
SHTools, for Windows 7/8/10 32/64 Bit 3.89 FW3 6 MB

Drivers

 Name Version Size History
NETLink-S7-NET Driver, for Windows 7/8/10 32/64 Bit 3.5.0.1 11 MB

S7-200, S7-300, and S7-400 are registered trademarks of Siemens AG.