PROFINET Coupler
PN / EtherNetIP
Machines and systems can be linked with fieldbus couplers. This makes data exchange between different control worlds possible. A complex CPU-to-CPU communication can be omitted. Depending on the fieldbus, the integration takes place via device description files such as GSD, GSDML or EDS.
With the PN/EtherNetIP Coupler, a simple and uncomplicated connection of a PROFINET machine to an EtherNet/IP machine is possible. The PN/EtherNetIP Coupler allows data transmission between a PROFINET controller and an EtherNet/IP PLC.
Received input data on one side of the network are made available as output data on the other side of the network to the PLC. The I/O data exchange takes place live and as fast as possible without further handling blocks.
The maximum size of the transferable I/O data is 1024 bytes. Up to 3 input and 3 output assemblies can be configured on the EtherNet/IP network side. Up to 300 slots are available for I/O modules.
The integration into the PLC engineering tool is made possible by a GSDML file, an extra configuration software is not necessary. The configuration of the I/O data to be exchanged is performed in the Siemens engineering tool. An EDS file matching the configuration can then be downloaded from the website by the PN/EtherNetIP Coupler and used to configure the EtherNet/IP PLC.
- Very compact design for DIN rail mounting
- Redundant power supply
- Galvanic isolation of the networks
- Up to 1024 Byte input/output data
- 300 configurable slots for PROFINET IO data
- 3 input and 3 output assemblies
- Configuration just with GSDML file, no further software necessary
- EDS file downloadable
- Diagnostics website
- MQTT Publisher on both network sides (PROFINET & Ethernet/IP)
General information
- Order number700-160-3EN02
- Article namePN/EtherNetIP Coupler
- Scope of deliveryPN/EtherNetIP Coupler with power supply plug
- Dimensions (DxWxH)32.5 x 58.5 x 76 mm mm
- WeightApprox. 135 g
PROFINET interface (X1)
- Number1
- Connection2 x RJ45, integrated switch
- ProtocolPROFINET IO Device as defined in IEC 61158-6-10
- Transmission rate100 Mbps full duplex
- I/O image sizemax. 1024 bytes of input and output data
- Featuresmedia redundancy(MRP-Client),
- automatic addressing,
- Topologieerkennung (LLDP, DCP),
- diagnosis alarms
- PROFINET conformance class B
EtherNet/IP interface (X2)
- Number1
- Connection2x RJ45, integrated switch
- ProtocolEtherNet/IP
- implicit messaging (Transport Class 1)
- explicit messaging (Transport Class 3)
- Transmission rate10/100 Mbit/s, full-/half duplex
- I/O image size3x input assemblies + 3x output assemblies
- together maximum 1024 bytes data
- Number of the assemblies adjustable
Status indicator
- Function indicator9 LEDs
- Ethernet status8 LEDs
Power supply
- Operating voltage24 V DC (18 - 28 V DC)
- Current drawmax. 140 mA
- Power dissipationmax. 3.4 W
Ambient conditions
- Ambient temperature0 °C to 60 °C
- Transport and storage temperature-20 °C to 80 °C
- Relative air humidity95% non-condensing
- Protection ratingIP 20
- Mounting positionas desired
- ApprovalsCE, UL
UL
- ULUL 61010-1 / UL 61010-2-201
- Surrounding Air TemperatureDC 24 V (18 ... 28 VDC, SELV and limited energy circuit)
- Pollution degree2
- AltitudeUp to 2000m
- Temperature cable rating87 °C
| Name | Version | Size |
| PN/EthernetIP Coupler, Quick Start Guide | 4 | 788 KB |
| PN/EthernetIP Coupler, PROFINET-Certificate | 82 KB | |
| EU Declaration of Confirmity | 04-2020 | 53 KB |
| Name | Version | Size |
| Easy connection of fieldbus networks – with Helmholz PROFINET gateways | 10-2023 | 1 MB |
| Name | Version | Size |
| PN/EtherNetIP Coupler, GSDML file | 20220518 | 11 KB |
| PN/EtherNetIP Coupler, Firmware | V1.04.006 | 12 MB |
| Name | Version | Size |
| PN/EtherNetIP Coupler, STEP files | 13 MB |
The Direct Line to Your Supporter.
Do you need help with your Helmholz product? The Technical Support Team offers you exactly the support you need.
Submit your support request online and we will connect you with an expert.