PN/PN Coupler V1
Product out of production!
Replacement model PN/PN Coupler V2.
With the PN/PN Coupler, a simple and uncomplicated connection of two separate PROFINET networks is possible. The PN/PN Coupler enables data transmission between two PROFINET controllers. A PROFINET IO device is on both PROFINET network sides. Received input data on one of the network sides is made available as output data to the other network side. The IO data transfer takes place live and as quickly as possible without additional handling blocks.
The maximum size of the transmitted IO data is 1024 bytes. Up to 16 slots for IO modules of 1 byte and up to 128 bytes are available. The incorporation into the PLC engineering tool is made possible by a GSDML file; special configuration software isn’t necessary.
- Very compact design for DIN rail mounting
- Exchange of up to 1024 bytes of I / O data
- Redundant power supply
- Galvanic separation of the nets
- Configuration only with GSDML file, no further software required
- No influence on the opposite side in case of failure of the bus system
- PROFINET transmission rate 100 Mbps
|Article name||PN/PN Coupler V1|
|Scope of delivery||PN/PN Coupler, Quick Start Guide and CD with GSDML file|
|Dimensions (DxWxH)||35 x 58 x 72 mm|
|Weight||Approx. 135 g|
|Number||2 with 2 ports each|
|Protocol||PROFINET IO Device as defined in IEC 61158-6-10|
|Transmission rate||100 Mbps full duplex|
|I/O image size||max. 1024 bytes|
|Features||Media redundancy (MRP client), automatic addressing, topology detection (LLDP, DCP), diagnosis alarms, conformance class B|
|Voltage supply||24 V DC (18 - 28 V DC)|
|Current draw||max. 210 mA|
|Ambient temperature||0 °C to 60 °C|
|Transport and storage temperature||-20 °C to 80 °C|
|Protection rating||IP 20|
|PN/PN Coupler V1, Quick Start Guide||3||4 MB||PN/PN Coupler V1, Quick Start Guide|
|Easy connection of fieldbus networks – with Helmholz PROFINET gateways||09-2020||1 MB||Easy connection of fieldbus networks – with Helmholz PROFINET gateways|
|PN/PN Coupler, license terms||314 KB||PN/PN Coupler, license terms|
|PN/PN Coupler, GSDML file||20200908||8 KB||PN/PN Coupler, GSDML file|
|IPSet||1.04.006||23 MB|| History
|IPSet, IP Set|
|PN/PN Coupler, Firmware for 700-158-3PN01 (V1)||V1.00.124||5 MB|| History
- Fix: Racecondition solved that could lead to I/O data not being updated.
- Fix: Sporadic termination of AR
- Security fix: Removed telnet from device.
- Issues with not accessible network interface X2 resolved.
- Pin configuration of supply voltage monitoring fixed.
- Correction of MRP functionality.
- Initial release.
|PN/PN Coupler, macros for EPLAN||9 MB||PN/PN Coupler, macros for EPLAN|
|PN/PN Coupler, STEP files||2 MB||PN/PN Coupler, STEP files|
Our products contain, among others, open source software. This software is subject to the applicable licensing conditions. We will send you the appropriate licensing conditions, including a copy of the complete licensing text, together with the product. These are also available in our download area of the respective product under www.helmholz.de. We also offer to send you or any third party the complete source code of the applicable open source software as a DVD upon request for a contribution towards costs of 10.00 Euro. This offer is valid for a period of three years as of the delivery of the product.