FLEXtra STAGE PROFINET-Switch FO 10-Port, managed
The FLEXtra STAGE PROFINET-Switch connects the control world with PROFINET according to Conformance Class B and the IT world with up to 1 Gbit Ethernet.
€741.87
FLEXtra STAGE PROFINET-Switch FO 10-Port, managed
The managed FLEXtra STAGE PROFINET switch can be used to network PROFINET components with 100 Mbit as well as Ethernet nodes with up to 1 Gbit. Thus, communication from the control level and the machine or the mixing of Ethernet and PROFINET components in one switch is possible. PROFINET prioritization according to Conformance Class B of the machine components is always guaranteed.
One of the most important functions of a PROFINET switch is the prioritization of PROFINET telegram traffic in the machine network. The managed switch can distinguish whether the telegram is a web request, an FTP file transfer, a media stream, or a PROFINET telegram. In the event of a high transmission load, the important telegrams can thus be prioritized to prevent telegram losses of the machine components. The supported PROFINET protocols, such as LLDP, DCP or diagnostic alarms, can be easily parameterized and managed.
In addition to PROFINET, functions such as SNMP, NTP, VLAN, port mirroring, QoS/CoS mapping and extensive statistics are available for managing the Ethernet network. If required, the configuration can be saved on an SD card or loaded for commissioning.
The practical design with the intelligent arrangement of the Ethernet sockets saves space in the control cabinet. The status LEDs on the top of the FLEXtra PROFINET switch, which are always clearly visible, allow for easy diagnostics even when fully wired.
In addition, the FLEXtra PROFINET switch supports port control via inputs and port status indication via outputs. Bits in the PROFINET-IO image of the switch can be used as inputs and outputs as well as 4 digital inputs and 2 digital outputs with 24V. The assignment and the function of the inputs and outputs can be configured via the GSDML file.
Technical advantages when using a PROFINET-Switch
- Prioritizing of PROFINET frames
- Assignment of a configuration via the device name
- Neighborhood detection
- Device exchange without programming device
- Ring redundancy
- Each port can be activated or deactivated
- Diagnostic messages for network problems
- Identification and maintenance data
In addition, the FLEXtra PROFINET switch supports the control of ports via inputs and the display of port states via outputs. Bits in the PROFINET-IO image of the switch as well as 4 digital inputs and 2 digital outputs with 24V can be used as inputs and outputs. The assignment and the function of the inputs and outputs can be configured via the GSDML file.
- PROFINET Conformance Class B
- Integration into the automation network with GSDML file
- Fast and easy configuration and diagnostics via PROFINET and web interface
- LLDP, DCP, diagnostic alarms
- Media redundancy: MRP client
- SNMP, VLAN, Cos/QoS mapping, NTP, port mirroring
- Network statistics (frames, errors)
- SD memory card for configuration
- Redundant power supply
- Practical design for optimized cable routes
- 10-port Ethernet with up to 1000 Mbit/s
- Can be used in PROFIsafe applications
FLEXtra STAGE PROFINET-Switch FO 10-Port, managed
General
- Order number700-856-8FO21
- NameFLEXtra STAGE PROFINET-Switch FO 10-Port, managed, 100/1000Mbit
- Scope of deliveryPROFINET-Switch FO 10-Port with power supply plug
- Dimensions (D x W x H)78 x 93 x 112 mm
- WeightCa. 420 g
PROFINET/Ethernet interfaces (X1)
- Connection8 x RJ45
- 2 x Fiber Optic (FO) for SFP Transceiver modules, Single mode or Multimode
- integrated Switch
- Transmission rateRJ45: 10/100/1000 Mbps
- SFP: 1000 Mbps
- ProtocolPROFINET IO Device as defined in IEC 61158-6-10
- FeaturesPROFINET Conformance Class B, Media Redundancy (MRP), automatic addressing (DCP), topology detection (LLDP), diagnostic alarms, VLAN, SNMP V2/V3, Port-Mirroring, Port statistics
Status indication
- Function status4 LEDs
- Ethernet status10 LEDs (bi-colored)
Power supply
- Operating voltage2x DC 24 V, 18 − 30 V DC, redundant
- Current drawmax. 370 mA with DC 24 V
- Power dissipationMax. 9,3 W
Ambient conditions
- Ambient temperature-40° C to +75° C
- Transport and storage temperature-20° C to +80° C
- Relative humidity95% without condensation
- Protection ratingIP 20
- Mounting positionAs desired
- ApprovalsCE
FLEXtra STAGE PROFINET-Switch FO 10-Port, managed
| Name | Version | Größe | |
| FLEXtra STAGE PROFINET-Switch Manual | 7 | 2,3 MB | Download |
| FLEXtra STAGE PROFINET-Switch, Quickstart Guide | 4 | 1,05 MB | Download |
| Name | Version | Size | |
| FLEXTRA STAGE PN-Switch GSDML-Files | 10-2023 | 23 KB | Download |
| Name | Version | Size | |
| IPSet | 1.04.016 | 23 MB | Download |
| IPSet, OpenSource license terms | Download |
| Name | Version | Größe | |
| FLEXtra STAGE PROFINET-Switch Firmware | V1.10.016 | 17 MB | Download |
| FLEXtra STAGE PROFINET-Switch Firmware History | V1.10.016 | Download |
| Name | Version | Size | |
| FLEXtra STAGE PROFINET-Switch, STEP-files | 6-2024 | 2 MB | Download |
| EPLAN Data Portal, Helmholz product macros | Download |
| Name | Version | Size | |
| Advantages of a PROFINET-Switch | 4 | 2 MB | Download |
| PROFINET FAQ | 2 | 190 KB | Download |
| Automation and the IT world in a single device | 10-2023 | Download |
| Name | Version | Size | |
| Innovatively networking automation – PROFINET and Ethernet-Switches | 3-2026 | 2 MB | Download |
FLEXtra STAGE PROFINET-Switch FO 10-Port, managed
The managed FLEXtra STAGE PROFINET switch can be used to network PROFINET components with 100 Mbit as well as Ethernet nodes with up to 1 Gbit. Thus, communication from the control level and the machine or the mixing of Ethernet and PROFINET components in one switch is possible. PROFINET prioritization according to Conformance Class B of the machine components is always guaranteed.
One of the most important functions of a PROFINET switch is the prioritization of PROFINET telegram traffic in the machine network. The managed switch can distinguish whether the telegram is a web request, an FTP file transfer, a media stream, or a PROFINET telegram. In the event of a high transmission load, the important telegrams can thus be prioritized to prevent telegram losses of the machine components. The supported PROFINET protocols, such as LLDP, DCP or diagnostic alarms, can be easily parameterized and managed.
In addition to PROFINET, functions such as SNMP, NTP, VLAN, port mirroring, QoS/CoS mapping and extensive statistics are available for managing the Ethernet network. If required, the configuration can be saved on an SD card or loaded for commissioning.
The practical design with the intelligent arrangement of the Ethernet sockets saves space in the control cabinet. The status LEDs on the top of the FLEXtra PROFINET switch, which are always clearly visible, allow for easy diagnostics even when fully wired.
In addition, the FLEXtra PROFINET switch supports port control via inputs and port status indication via outputs. Bits in the PROFINET-IO image of the switch can be used as inputs and outputs as well as 4 digital inputs and 2 digital outputs with 24V. The assignment and the function of the inputs and outputs can be configured via the GSDML file.
Technical advantages when using a PROFINET-Switch
- Prioritizing of PROFINET frames
- Assignment of a configuration via the device name
- Neighborhood detection
- Device exchange without programming device
- Ring redundancy
- Each port can be activated or deactivated
- Diagnostic messages for network problems
- Identification and maintenance data
In addition, the FLEXtra PROFINET switch supports the control of ports via inputs and the display of port states via outputs. Bits in the PROFINET-IO image of the switch as well as 4 digital inputs and 2 digital outputs with 24V can be used as inputs and outputs. The assignment and the function of the inputs and outputs can be configured via the GSDML file.
- PROFINET Conformance Class B
- Integration into the automation network with GSDML file
- Fast and easy configuration and diagnostics via PROFINET and web interface
- LLDP, DCP, diagnostic alarms
- Media redundancy: MRP client
- SNMP, VLAN, Cos/QoS mapping, NTP, port mirroring
- Network statistics (frames, errors)
- SD memory card for configuration
- Redundant power supply
- Practical design for optimized cable routes
- 10-port Ethernet with up to 1000 Mbit/s
- Can be used in PROFIsafe applications
FLEXtra STAGE PROFINET-Switch FO 10-Port, managed
| Name | Version | Größe | |
| FLEXtra STAGE PROFINET-Switch Manual | 7 | 2,3 MB | Download |
| FLEXtra STAGE PROFINET-Switch, Quickstart Guide | 4 | 1,05 MB | Download |
| Name | Version | Size | |
| FLEXTRA STAGE PN-Switch GSDML-Files | 10-2023 | 23 KB | Download |
| Name | Version | Size | |
| IPSet | 1.04.016 | 23 MB | Download |
| IPSet, OpenSource license terms | Download |
| Name | Version | Größe | |
| FLEXtra STAGE PROFINET-Switch Firmware | V1.10.016 | 17 MB | Download |
| FLEXtra STAGE PROFINET-Switch Firmware History | V1.10.016 | Download |
| Name | Version | Size | |
| FLEXtra STAGE PROFINET-Switch, STEP-files | 6-2024 | 2 MB | Download |
| EPLAN Data Portal, Helmholz product macros | Download |
| Name | Version | Size | |
| Advantages of a PROFINET-Switch | 4 | 2 MB | Download |
| PROFINET FAQ | 2 | 190 KB | Download |
| Automation and the IT world in a single device | 10-2023 | Download |
| Name | Version | Size | |
| Innovatively networking automation – PROFINET and Ethernet-Switches | 3-2026 | 2 MB | Download |
