The managed PROFINET-Switch supports PROFINET according to Conformance Class B and offers transmission security through ring redundancy as an MRP client.
One of the most important functions of a PROFINET-Switch is the prioritizing of the PROFINET frame traffic in the machine network. The managed switch can differentiate whether the frame is a web query, an FTP file transmission, a media stream, or a PROFINET frame. In the case of a high transmission load, the important frames can thus be prioritized in order to prevent frame losses.
With a GSDML file you can integrate the switch into your automation environment in the usual way.
The supported PROFINET protocols, such as LLPD, DCP, or even diagnosis alarms, can be easily configured and administered.
Technical advantages when using a PROFINET-Switch
- Prioritizing of PROFINET frames
- Assignment of a configuration via the device name
- Neighborhood detection
- Device exchange without programming device
- Ring redundancy
- Each port can be activated or deactivated
- Diagnostic messages for network problems
- Identification and maintenance data
With this variant of the managed PROFINET-Switch, you can connect up to 8 network participants while saving time and money. If you would like to use only one part, we recommend our 4-port managed PROFINET-Switch.
- PROFINET Conformance Class B
- Integration into the automation network with GSDML file
- Quick, simple configuration and diagnosis via PROFINET and web interface
- LLPD, DCP, SNMP, diagnosis alarms
- Media redundancy: MRP client
- Port mirroring
- Network statistics (frames and errors)
- Managed switch with 8 x 100 Mbps RJ45 ports
|Article name||PROFINET Switch 8-port, managed|
|Scope of delivery||PROFINET Switch 8-port, Quick Start Guide, CD with GSDML-File|
|Dimensions (DxWxH)||32,5 x 83,5 x 76,5 mm|
|Weight||Approx. 180 g|
|Protocol||PROFINET IO Device as defined in IEC 61158-6-10|
|Transmission rate||max. 100 Mbps|
|Features||Media Redundancy Protocol (MRP), automatic addressing / topology detection (LLDP, DCP), conformance class B|
|Status indicator||4 LEDs, function status
16 LEDs, Ethernet status
|Voltage supply||24 V DC (18...30 V DC)|
|Current draw||Max. 350 mA with 24 V DC|
|Power dissipation||Max. 2 W|
|Ambient temperature||-40 °C ... +75°C|
|Transport and storage temperature||-40 °C … +85 °C|
|Relative air humidity||95 % r H without condensation|
|UL||UL 61010-1/ UL 61010-2-201|
|Voltage supply||DC 24 V (18 ... 30 V DC, SELV and limited energy circuit)|
|Altitude||Up to 2,000 m|
|Temperature cable rating||87 °C|
|PROFINET-Switch, FAQ||2||180 KB|
|PROFINET-Switch 4/8/16-Port, Quick Start Guide||10||2 MB|
|PROFINET-Switch 4/8/16-port, Manual||1||2 MB||PROFINET-Switch 4/8/16-port, Manual|
|PROFINET-Switch 4/8/16-port, Manual – as of firmware V1.10||4||3 MB||PROFINET-Switch 4/8/16-port, Manual|
|EG Declaration of Conformity||03-2019||83 KB||EG Declaration of Conformity|
|Advantages of a PROFINET-Switch||4||2 MB||Advantages of a PROFINET-Switch|
|Innovatively networking automation - PROFINET and Ethernet-Switches||11-2020||2 MB||Innovatively networking automation - PROFINET and Ethernet-Switches|
|IPSet, OpenSource license terms||25 KB|
|PROFINET switch, 16-port, Open Source License Terms||555 KB||PROFINET switch, 16-port, Open Source License Terms|
|Infrastructure Products, Macros for EPLAN Electric P8*||1||3 MB|
|IPSet||1.04.006||23 MB|| History
|IPSet, IP Set|
|PROFINET-Switch, 4/8/16-port, GSDML file||9-2019||20 KB||PROFINET-Switch, 4/8/16-port, GSDML file|
|PROFINET Switch 8-port, Firmware||V1.10.008||11 MB|| History
- New design of webinterface.
- Minor changes from passed PROFINET Certification V2.34 to consolidate all switch variants to same version.
- Internal switch communication stabilized.
- PROFINET certification completed.
- Any 2 ports can be used for MRP functionality.
|PROFINET Switch 8-port, Firmware|
|PROFINET switch, 8-port, STEP files||2 MB||PROFINET switch, 8-port, STEP files|
Our products contain, among others, open source software. This software is subject to the applicable licensing conditions. We will send you the appropriate licensing conditions, including a copy of the complete licensing text, together with the product. These are also available in our download area of the respective product under www.helmholz.de. We also offer to send you or any third party the complete source code of the applicable open source software as a DVD upon request for a contribution towards costs of 10.00 Euro. This offer is valid for a period of three years as of the delivery of the product.