================================= (WALL IE) Firmware History ================================= V1.10.212 13.04.2023 Feature: NTP server on LAN Feature: Static leases for DHCP server V1.10.204 20.01.2023 Fix: DNS Hostname is now properly set after a factory reset V1.10.200 27.09.2022 Feature: Support for new hardware version Feature: Downgrade restriction for devices with new hardware version V1.10.100 16.02.2022 Fix: FTP button now disabled when function unavailable Fix: Don't allow simultaneous firmware updates from different connections Fix: Filtering, properly show invalid port and ip range warnings Fix: Filtering, allow adding identical source and destination addresses Fix: Filtering, don't restrict adding 0.0.0.0/0 or 0.0.0.0-255.255.255.255 Fix: Bridge Mode is now using the MAC address of the LAN interface Fix: Syslog now starts earlier to provide start up information Fix: DNS, properly validate hostname Fix: Allow setting date for leap year Feature: FTP helper in NAT Mode for Wan2Lan Feature: Added filtering for Layer 2 protocols in Bridge Mode Other: Align buttons in tables to the right Other: Don't show WAN IP and MAC when in Bridge Mode Other: Small enhancements/fixes V1.10.000 17.12.2020 Feature: FTP helper on Bridge Mode/Wan2Lan Feature: Properly forward DCP frames Feature: DNS server on LAN side Feature: Support new protocol handler ICMP Feature: Get DOMAINof WAN DHCP server Fix: Reload rules when interface/s addr has been changed Fix: Other small bugfixes V1.08.400 20.04.2020 Feature: IP ranges in NAT mode possible Fix: Helmholz logo link on web page is opened in same tab Fix: Possible to use LAN IP address in NAT rule Fix: IP range in NAT, CIDR allows bigger range than 1022 Fix: JS doesn't recognize /0 CIDR as wrong input Fix: IP range in NAT, IP address checking is not good Fix: Interface, JS doesn't recognize invalid netmasks Fix: Packet filter doesn't work in some cases Fix: Wrong error messages NAT edit rule Fix: Possible to add NAT rule containing LAN IP address Fix: Web: edit items, packet filter action is always set to "active" V1.08.202 13.02.2020 - Fix: After importing config file the password does not have to be set again V1.08.200 08.01.2020 - Feature: Implemented copy/edit rule items - Feature: Show tooltips for rule buttons - Feature: Enhance security responses with some critical HTTP/s headers - Feature: Show notices by colorizing line when static route is not reachable by scope link - Fix: Insertion of /31 netmask within packet filtering - Fix: Unable to fetch proper month of the year - Fix: Update official link - Fix: Update wallie logo - Fix: Store linceses in zip instead of bzip - Fix: Don´t resubmit forms on refresh V1.08.100 02.07.2019 - Feature: SNAT feature added - Fix: Changed warning messages for non matching passwords - Fix: Ip Addresses: Octets starting with leading “0” are now declared as invalid address - Fix: All DNS entry are now optional - Fix: DHCP lease time list is cleared after change of interface or dhcp settings - Fix: Multilevel timezone entries are now saved properly when selected - Fix: Syslog remote target identical as WAN or LAN are prohibited now - Fix: Issue when importing config where some settings are not properly set is fixed V1.08.004 21.09.2018 - Feature: it-user allow to change DNS/GATEWAY also - Fix: dhcpd missing export of domain setting - Fix: Remote syslog compatibility settings V1.08.002 19.09.2018 - Feature: Implementation of additional user IT-user and Machine-user with corresponding access rights - Fix: Gateway settings effective when device is in bridge mode - Fix: Static routes on LAN side enabled - Fix: Internal parameter name for reboot functionality corrected - Other: Internal messaging system improved - Other: Minor web page enhancements V1.06.352 14.06.2018 - Fix: Activating Hostname sets WAN IPs to 0.0.0.0 V1.06.200 26.04.2018 - Fix: Issue when adding additional rules with port ranges - Fix: Issue with webserver when clearing syslog entries V1.06.100 05.03.2018 - Fix: Log entry when invalid certificate is uploaded - Fix: Multiple scrollbars when modal dialog is shown - Fix: Firmware upgrade using Edge/IE11 - Fix: Dump config without auth session - Fix: Add tooltip for all port checkbox - Fix: Deeplinks points to valid location - Fix: Port validation within NAPT not triggered - Fix: NAPT, dont allow to use LAN or WAN interface IP - Fix: Dhcp client properly send DHCPRELEASE message when needed - Fix: Dhcp client properly send device hostname - Feature: Show DHCP server leases - Feature: Show/hide DHCP expired leases - Feature: Ip ranges for filtering (for more info read manual) - Feature: Use new color gray/white for button color scheme - Other: Small enhancements/fixes V1.06.000 27.11.2017 - Feature: Implementation of DHCP server on LAN side - Feature: Implementation of DHCP client on WAN side - Feature: Implementation of port ranges within filter - Feature: Implement of hostname used as DHCP option - Fix: User interface: removed tooltips - Fix: User interface: zeros as LAN interface address not allowed - Fix: IE11 not properly follow redirects - Fix: Improvement of overview page by showing more interface infos - Fix: Setting NAT rules only when WAN interface exist - Fix: Removed subnet restriction validator - Other: Smaller issues fixed V1.04.004 17.02.2017 - Fix: Kernel panic on usage of multicast ip addresses - Fix: Error in adding NAT rule where subnets could not be distinguished - Fix: TCP/UDP kernel panic on high network load - Fix: Downgrade to older firmware failed - Fix: Syslog timestamp showed wrong daylight-saving time correction - Fix: Mapping of reserved ports used by WALL IE itself - General: Kernel upgrade from 4.1.6 to 4.9.4 - General: Company name on website changed - General: Company name in default certificated changed V1.04.000 18.11.2016 - Feature: MAC filtering (whitelist/blacklist) on L2/L3 - Feature: Import/Export of configuration file - Feature: Lan to Wan packet filtering - Feature: Web interface access via WAN interface - Feature: ICMP passthrough for both wan and Lan - Feature: Confirmation of factory reset and reboot - Feature: Added icons to buttons - Fix: Added time and date validator - Fix: Limited CIDR range to 30bits - Fix: Reject multi-cast address - Fix: Decline reverts to old input - Fix: Upload path magic is consistent now - Fix: Added time info to dashboard - Web: Minor fixes and enhancements V1.02.000 22.03.2016 - Feature: Set system time using SNTP or manually - Feature: Add default gateway and DNS server configuration - Usability: Redirect from http:// to https:// - Usability: Improve validation of invalid or overlapping rules - Usability: Redirect to login after session timeout and reboot - Usability: List syslog entries in descending order - Usability: Info and error messages do not fade out - Security: Minimum password length of 8 characters - Security: Reject non-IPv4 ethernet frames in bridge mode - TLS: Fix validity period of generated certificate - TLS: Improve validation of exchanged certificate and key - General: Switch to musl libc - General: Automatic reboot after firmware upgrade - Web: Display more hardware information - Switch: Do not forward LLDP frames V1.00.100 30.10.2015 - Fix: Syslog: Do not log unimportant details - FiX: HTTPS Certificate exchange: Validate before using it - Fix: Bridge mode: Changing of IP address not working properly - Fix: Bridge mode: Return 404 for NAT pages when directly accessed - Fix: Web session timeout of 15 minutes - Fix: EEPROM check failed: Answer all requests with error message - Fix problems with some pages in IE