FLEXtra PROFINET-Switch

FLEXtra PROFINET-Switch 16-Port,  10/100/1000Mbps
FLEXtra PROFINET-Switch 16-Port,  10/100/1000MbpsFLEXtra PROFINET-Switch 16-Port,  10/100/1000Mbps
FLEXtra PROFINET-Switch 16-Port,  10/100/1000Mbps
FLEXtra PROFINET-Switch 16-Port,  10/100/1000Mbps
FLEXtra PROFINET-Switch 16-Port,  10/100/1000Mbps

16-Port, managed, 10/100/1000Mbps

The FLEXtra PROFINET-Switch connects the control world with PROFINET according to Conformance Class B and the IT world with up to 1GBit Ethernet.

The managed FLEXtra PROFINET switch 16 port can be used to network PROFINET components with 100 Mbps as well as Ethernet nodes with up to 1000 Mbps. Thus, communication from the control level and the machine or the mixing of Ethernet and PROFINET components in one switch is possible. PROFINET prioritization according to Conformance Class B of the machine components is always guaranteed.
One of the most important functions of a PROFINET switch is the prioritization of PROFINET telegram traffic in the machine network. The managed switch can distinguish whether the telegram is a web request, an FTP file transfer, a media stream, or a PROFINET telegram. In the event of a high transmission load, the important telegrams can thus be prioritized to prevent telegram losses of the machine components. The supported PROFINET protocols, such as LLDP, DCP or diagnostic alarms, can be easily parameterized and managed.
In addition to PROFINET, functions such as SNMP, NTP, VLAN, port mirroring, QoS/CoS mapping and extensive statistics are available for managing the Ethernet network. If required, the configuration can be saved on an SD card or loaded for commissioning.
The practical design with the intelligent arrangement of the Ethernet sockets saves space in the control cabinet. The status LEDs on the top of the FLEXtra PROFINET switch, which are always clearly visible, allow for easy diagnostics even when fully wired.
In addition, the FLEXtra PROFINET switch supports port control via inputs and port status indication via outputs. Bits in the PROFINET-IO image of the switch can be used as inputs and outputs as well as 4 digital inputs and 2 digital outputs with 24V. The assignment and the function of the inputs and outputs can be configured via the GSDML file.

Technical advantages when using a PROFINET-Switch

  • Prioritizing of PROFINET frames
  • Assignment of a configuration via the device name
  • Neighborhood detection
  • Device exchange without programming device
  • Ring redundancy
  • Each port can be activated or deactivated
  • Diagnostic messages for network problems
  • Identification and maintenance data

  • PROFINET Conformance Class B (100 Mbps)
  • Integration into the automation network with GSDML file
  • Fast and easy configuration and diagnostics via PROFINET and web interface
  • LLDP, DCP, diagnostic alarms
  • Media redundancy: MRP client
  • SNMP, VLAN, Cos/QoS mapping, NTP, port mirroring
  • Network statistics (frames, errors)
  • SD memory card for configuration
  • Redundant power supply
  • Practical design for optimized cable routes
  • 16-port Ethernet with up to 1000 Mbps
Download PDF datasheet
General information
Order number700-855-16P01
Article nameFLEXtra PROFINET-Switch 16-Port, managed, 10/100/1000Mbps
Scope of deliveryFLEXtra PROFINET-Switch 16-Port with power supply plug
Dimensions (DxWxH)78 x 125 x 111 mm
WeightApprox. 550 g
PROFINET interface
Number16
ProtocolPROFINET IO Device as defined in IEC 61158-6-10
Physical layerEthernet
Transmission ratePROFINET: 100 Mbps
Ethernet: 10/100/1000 Mbps
Connection16 x RJ45 socket
integrated switchYes
FeaturesPROFINET Conformance Class B
Media Redundancy (MRP)
automatic addressing (DCP)
topology detection (LLDP)
diagnostic alarms
Digitale Ein/AusgängeInputs: 4, type 3 according to DIN EN 61131-2
Outputs: 2, 500mA 24V DC, with electronic fuse
Status indicator4 LEDs function status, 16 LEDs Ethernet-Status (two-colored)
Voltage supply2x DC 24 V, 18 − 30 V DC, redundant
Current drawmax. 400 mA with DC 24 V
Power dissipationMax. 9,6 W
Mounting positionAny
CE
RoHSYes
REACHYes

Videos

Advantages of the PN-Switch compared to a classic switch

Technical Documentation

 NameVersionSizeTags
PROFINET-Switch, FAQ 2 180 KB
Advantages of a PROFINET-Switch 4 2 MBAdvantages of a PROFINET-Switch
FLEXtra PROFINET-Switch 16-Port, Quick Start Guide 2 685 KBFLEXtra PROFINET-Switch 16-Port, Quick Start Guide
FLEXtra PROFINET-Switch 16-port, Manual 1 2 MBFLEXtra PROFINET-Switch 16-port, Manual

Flyers

 NameVersionSizeTags
FLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device 06-2021 1 MBFLEXtra-PROFINET-Switch – Connect the Automation and IT worlds with just one device
Innovatively networking automation - PROFINET and Ethernet-Switches 04-2021 2 MBInnovatively networking automation - PROFINET and Ethernet-Switches

License Agreements

 NameVersionSizeTags
IPSet, OpenSource license terms 25 KB

Software

 NameVersionSizeTags
FLEXtra PROFINET-Switch 16-Port, GSDML File 20210820 8 KBFLEXtra PROFINET-Switch 16-Port, GSDML File
FLEXtra PROFINET-Switch 16-port, Firmware V1.06.002 13 MB History

Planning Tools

 NameVersionSizeTags
FLEXtra PROFINET-Switch, 16-port, STEP files 19 MBFLEXtra PROFINET-Switch, 16-port, STEP files
FLEXtra PROFINET-Switch 16-Port, STEP files 31 MBFLEXtra PROFINET-Switch 16-Port, STEP files
Spam-Schutz

Our products contain, among others, open source software. This software is subject to the applicable licensing conditions. We will send you the appropriate licensing conditions, including a copy of the complete licensing text, together with the product. These are also available in our download area of the respective product under www.helmholz.de. We also offer to send you or any third party the complete source code of the applicable open source software as a DVD upon request for a contribution towards costs of 10.00 Euro. This offer is valid for a period of three years as of the delivery of the product.