CAN-Bridge
The CAN bridge makes it possible to connect two CAN networks of the same type or of different types.
- Order number: 700-660-2AA01
It can be used as a message repeater to expand network distances, as well as to connect different CAN networks together. By transmit the messages is immaterially whether the CAN networks have different transfer rates or the messages those are a part of different higher protocols, such as CANopen® and a proprietary protocol.
A flexibly adjustable filtering logic can accept freely selectable identifiers and transfer them to the other network.
The CAN messages are forwarded to the respective other CAN network according to the store-forward principle and sent out again.
With the CAN bridge, the CAN networks are physically decoupled (electrical isolation) and the bus load is reduced on both CAN networks. The CAN bridge allows a flexible design of the network topology
- Enlargement of the network scope
- Connect different CAN networks (different transmission rates / messages, those are part of different higher protocols)
- Physical disconnection (electrical isolation)
- Reduced bus load on both CAN networks
- Automatic detection of transmission rates
- Easy configuration mode
- For use with CAN 2.0A & 2.0B, CANopen®, DeviceNet, SAE J1939
- DIN rail mounting
General information
- Order number700-660-2AA01
- Article nameCAN bridge, 2 x CAN bus interfaces
- Scope of deliveryCAN bridge, manual, software, USB programming cable
- Dimensions (DxWxH)31 x 74 x 75 mm
- WeightApprox. 130 g
- Status indicator5 LEDs
- Voltage supply24 V DC, 18–30 V DC
CAN interface
- Number2
- TypeISO/DIN 11898-2 CAN High-speed physical layer
- Transmission rate10 kbps ... 1 Mbps
- ProtocolCAN 2.0A (11 bit)/ CAN 2.0B (29 bit) Layer 2, transparent
- ConnectionConnector, SUB-D, 9-pin
- Featuresautomatic detection of transmission rate or fixed setting
Configuration interface
- TypeUSB 1.1
- ConnectionMini USB socket
Current draw
- Current draw typical35 mA
- Current draw maximal60 mA
Ambient conditions
- Ambient temperature-25 °C … +60°C
- Transport and storage temperature-25 °C … +75 °C
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
Name | Version | Size |
CAN Bridge, Manual | 1 | 522 KB |
EU Declaration of Confirmity | 05-2019 | 70 KB |
Name | Version | Size |
CAN-BridgeParam | 2 | 23 MB |
CAN-Bridge, Firmware History | 136 B |
Name | Version | Size |
CAN-Bridge, USB Driver | 2.12.24 | 1,014 KB |
Name | Version | Size |
CAN-Bridge, STEP-files | 2 MB | |
CAN-Bridge, macros for EPLAN | 1 MB |