TAP IE 100
Ethernet Test Access Point
TAP IE 100, Ethernet Test Access Point, 10/100 Mbps
The TAP IE 100 enables recording of Ethernet communications at 10 or 100 Mbps without retroactive effect. The Ethernet transmission via the Line RJ45 sockets is sent out on the two monitor sockets as a "copy". With a PC or other diagnostic device the Ethernet telegrams can be logged and analyzed, e.g. with "Wireshark". The practical flat design with the intelligent arrangement of the network connections saves space in the control cabinet.
- Non-reactive recording of Ethernet communication
- Secure and passive decoupling of telegrams
- Monitors all OSI layers starting from layer 2 and mirrors packets of all sizes and types and VLAN traffic
- For 10 or 100Mbit/s
- No influence on Ethernet transmission in case of power failure
| General information | ||
|---|---|---|
| Order number | 700-800-TAP01 | |
| Article name | TAP IE 100, Ethernet Test Access Point 10/100 Mbps | |
| Scope of delivery | TAP IE 100 with power supply plug | |
| Dimensions (DxWxH) | 34,5 x 48 x 75,5 mm (without power supply plug) 43,5 x 48 x 75,5 mm (with power supply plug) | |
| Weight | ca. 95 g | |
| Ethernet interface | ||
| Protocol | 10 Base-T, 100 Base-TX | |
| Transmission rate | 10/100 Mbit/s | |
| Connection | 2 x RJ45 „LINE“ 2 x RJ45 „MON“ (Monitor) | |
| Status indicator | 1 LEDs Power, 2 LEDs Ethernet-Status MON1/2 | |
| Voltage supply | 2x DC 24 V, 18 − 30 V DC | |
| Current draw | max. 0,9 W | |
| Power dissipation | max. 40 mA bei DC 24 V | |
| Ambient conditions | ||
| Ambient temperature | -40 °C ... +75°C | |
| Transport and storage temperature | -40 °C ... +85°C | |
| Relative air humidity | 95 % r H without condensation | |
| Protection rating | IP20 | |
| Mounting position | Any | |
| CE | ||
| RoHS | Yes | |
| REACH | Yes | |
Technical Documentation
| Name | Version | Size | Tags | |
|---|---|---|---|---|
| TAP IE 100, Quick Start Guide | 1 | 333 KB | TAP IE 100, Ethernet Test Access Point, Industrial Ethernet |