Ethernet Test Access Point
The TAP IE 100 enables recording of Ethernet communications at 10 or 100 Mbps without retroactive effect.
€249.00
Ethernet Test Access Point
The Ethernet transmission via the Line RJ45 sockets is sent out on the two monitor sockets as a "copy". With a PC or other diagnostic device the Ethernet telegrams can be logged and analyzed, e.g. with "Wireshark". The practical flat design with the intelligent arrangement of the network connections saves space in the control cabinet.
- Non-reactive recording of Ethernet communication
- Secure and passive decoupling of telegrams
- Monitors all OSI layers starting from layer 2 and mirrors packets of all sizes and types and VLAN traffic
- For 10 or 100Mbit/s
- No influence on Ethernet transmission in case of power failure
Ethernet Test Access Point
General information
- Order number700-800-TAP01
- Article nameTAP IE 100, Ethernet Test Access Point 10/100 Mbps
- Scope of deliveryTAP IE 100 with power supply plug
- Dimensions (DxWxH)34,5 x 48 x 75,5 mm (without power supply plug)
- Weightca. 95 g
Ethernet interface
- Connection2 x RJ45 „LINE“
- 2 x RJ45 „MON“ (Monitor)
- Protocol10 Base-T, 100 Base-TX
- Transmission rate10/100 Mbit/s
Status indication
- Power indication1 LEDs
- Ethernet status2 LEDs
Power supply
- Voltage supply2x DC 24 V, 18 − 30 V DC
- Current drawmax. 0,9 W
- Power dissipationmax. 40 mA bei DC 24 V
Ambient conditions
- Ambient temperature-40 °C ... +75°C
- Transport and storage temperature-40 °C ... +85°C
- Relative air humidity95 % r H without condensation
- Protection ratingIP20
- Mounting positionAny
- ApprovalsCE
Ethernet Test Access Point
| Name | Version | Size |
| TAP IE 100, Quick Start Guide | 1 | 333 KB |
| Name | Version | Size |
| Diagnosis TAP IE 100, STEP-File | 10 MB |
Ethernet Test Access Point
The Ethernet transmission via the Line RJ45 sockets is sent out on the two monitor sockets as a "copy". With a PC or other diagnostic device the Ethernet telegrams can be logged and analyzed, e.g. with "Wireshark". The practical flat design with the intelligent arrangement of the network connections saves space in the control cabinet.
- Non-reactive recording of Ethernet communication
- Secure and passive decoupling of telegrams
- Monitors all OSI layers starting from layer 2 and mirrors packets of all sizes and types and VLAN traffic
- For 10 or 100Mbit/s
- No influence on Ethernet transmission in case of power failure
Ethernet Test Access Point
General information
- Order number700-800-TAP01
- Article nameTAP IE 100, Ethernet Test Access Point 10/100 Mbps
- Scope of deliveryTAP IE 100 with power supply plug
- Dimensions (DxWxH)34,5 x 48 x 75,5 mm (without power supply plug)
- Weightca. 95 g
Ethernet interface
- Connection2 x RJ45 „LINE“
- 2 x RJ45 „MON“ (Monitor)
- Protocol10 Base-T, 100 Base-TX
- Transmission rate10/100 Mbit/s
Status indication
- Power indication1 LEDs
- Ethernet status2 LEDs
Power supply
- Voltage supply2x DC 24 V, 18 − 30 V DC
- Current drawmax. 0,9 W
- Power dissipationmax. 40 mA bei DC 24 V
Ambient conditions
- Ambient temperature-40 °C ... +75°C
- Transport and storage temperature-40 °C ... +85°C
- Relative air humidity95 % r H without condensation
- Protection ratingIP20
- Mounting positionAny
- ApprovalsCE
Ethernet Test Access Point
| Name | Version | Size |
| TAP IE 100, Quick Start Guide | 1 | 333 KB |
| Name | Version | Size |
| Diagnosis TAP IE 100, STEP-File | 10 MB |
