Counter, 32 Bit
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that therefore need to be pre-processed.
€207.82
Counter, 32 Bit
The counter module detects the edges of 24 V signals as pulses. The impulses can be counted or converted into a frequency, rotational speed, or period. The counter module features an additional 24 V input and a 24 V output for a direct response to start pulses and to quick system state changes.
Capturing modes
Pulse & direction
Rotary encoder with single evaluation
Rotary encoder with double evaluation
Rotary encoder with quadruple evaluation
Counting methods
Continuous counting
Once-only counting
Periodic counting
Measuring mode
Frequency measurement
Rotational speed measurement
Period measurement
Programmable input
PLC input
Approval (HW gate)
Synchronization
Periodic synchronization
Latch
Latch & retrigger
Can be inverted
Programmable output
PLC output
Count >= Reference value
Count <= Reference value
Count = Reference value
Can apply a substitute value at STOP
Note: Individual modules cannot be combined with the IO systems of other manufacturers.
- 32-bit counter
- Up to 500 KHz (4-fold evaluation)
- Accommodates 24 V incremental encoders and proximity sensors
- Filters: 10 kHz | 50 kHz | 100 kHz | 500 kHz
- All inputs can be inverted
- Limits for counter and measured readings
- Hysteresis for input
- Pulse duration for output
- Refresh rate / averaging time for measuring mode
- 8 bytes of input data (count and status)
- 8 bytes of output data (preset count and commands)
Counter, 32 Bit
General information
- Order number600-300-7AA01
- Article name1x Counter 24 V, 500 KHz, 32 bit
- Scope of delivery1x Counter 24 V, 500 KHz, 32 bit
- Dimensions (DxWxH)110 x 14 x 73 mm
- WeightApprox. 70 g
- Input voltage24 V DC
- Power dissipation0.8 W
- Input characteristic curveType 2, EN 61131-2
- Short-circuit protectionElectronic
- Parameter configuration length16 bytes
- Number of counters1
- Counter bit depth32 bits
- ounting frequency per channelMax. 500 kHz (for 4x evaluation)
- Hot-swap capableYes
Electrical isolation
- from the backplane busYes
- Between the channelsNo
Current draw
- ExternalMax. 10 mA + load
- InternalMax. 86 mA
Output current
- Rated value500 mA
- Leakage currentMax. 0.5 A
Ambient conditions
- Ambient temperature0 °C … +60 °C
- Transport and storage temperature-20 °C … +80 °C
- Relative air humidity95 % r H without condensation
- Protection ratingIP 20
- CertificationsCE, UL
UL
- Surrounding Air Temperature0 °C … +60°C
- Pollution degree2
CE
- Noise immunityDIN EN 61000-6-2 “EMC Immunity”
- Interference emissionDIN EN 61000-6-4 “EMC Emission”
- Vibration and shock resistanceDIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
Counter, 32 Bit
| Name | Version | Size |
| TB20, Manual Counter 24 V | 3 | 8 MB |
| Name | Version | Size |
| Flyer, TB20 IO-system for numerous applications | 08-2022 | 6 MB |
| Name | Version | Size |
| 1x Zähler 24 V, 500 KHz, 32 Bit, STEP Files | 3 MB |
Counter, 32 Bit
The counter module detects the edges of 24 V signals as pulses. The impulses can be counted or converted into a frequency, rotational speed, or period. The counter module features an additional 24 V input and a 24 V output for a direct response to start pulses and to quick system state changes.
Capturing modes
Pulse & direction
Rotary encoder with single evaluation
Rotary encoder with double evaluation
Rotary encoder with quadruple evaluation
Counting methods
Continuous counting
Once-only counting
Periodic counting
Measuring mode
Frequency measurement
Rotational speed measurement
Period measurement
Programmable input
PLC input
Approval (HW gate)
Synchronization
Periodic synchronization
Latch
Latch & retrigger
Can be inverted
Programmable output
PLC output
Count >= Reference value
Count <= Reference value
Count = Reference value
Can apply a substitute value at STOP
Note: Individual modules cannot be combined with the IO systems of other manufacturers.
- 32-bit counter
- Up to 500 KHz (4-fold evaluation)
- Accommodates 24 V incremental encoders and proximity sensors
- Filters: 10 kHz | 50 kHz | 100 kHz | 500 kHz
- All inputs can be inverted
- Limits for counter and measured readings
- Hysteresis for input
- Pulse duration for output
- Refresh rate / averaging time for measuring mode
- 8 bytes of input data (count and status)
- 8 bytes of output data (preset count and commands)
Counter, 32 Bit
General information
- Order number600-300-7AA01
- Article name1x Counter 24 V, 500 KHz, 32 bit
- Scope of delivery1x Counter 24 V, 500 KHz, 32 bit
- Dimensions (DxWxH)110 x 14 x 73 mm
- WeightApprox. 70 g
- Input voltage24 V DC
- Power dissipation0.8 W
- Input characteristic curveType 2, EN 61131-2
- Short-circuit protectionElectronic
- Parameter configuration length16 bytes
- Number of counters1
- Counter bit depth32 bits
- ounting frequency per channelMax. 500 kHz (for 4x evaluation)
- Hot-swap capableYes
Electrical isolation
- from the backplane busYes
- Between the channelsNo
Current draw
- ExternalMax. 10 mA + load
- InternalMax. 86 mA
Output current
- Rated value500 mA
- Leakage currentMax. 0.5 A
Ambient conditions
- Ambient temperature0 °C … +60 °C
- Transport and storage temperature-20 °C … +80 °C
- Relative air humidity95 % r H without condensation
- Protection ratingIP 20
- CertificationsCE, UL
UL
- Surrounding Air Temperature0 °C … +60°C
- Pollution degree2
CE
- Noise immunityDIN EN 61000-6-2 “EMC Immunity”
- Interference emissionDIN EN 61000-6-4 “EMC Emission”
- Vibration and shock resistanceDIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
Counter, 32 Bit
| Name | Version | Size |
| TB20, Manual Counter 24 V | 3 | 8 MB |
| Name | Version | Size |
| Flyer, TB20 IO-system for numerous applications | 08-2022 | 6 MB |
| Name | Version | Size |
| 1x Zähler 24 V, 500 KHz, 32 Bit, STEP Files | 3 MB |