DP/CAN Coupler, Layer 2
The DP/CAN coupler integrates CANopen® devices into a PROFIBUS DP network.
Product is discontinued
DP/CAN Coupler, Layer 2
On the PROFIBUS-DP, the DP/CAN coupler is a normal participant.
The I/O data of the CANopen participants is shown in the PROFIBUS in a transparent and freely configurable manner.
The DP/CAN coupler is integrated in the hardware configurator with a GSD file and can be completely configured there. Additional tools are not necessary.
The DP/CAN coupler Layer 2 allows you to connect any number of CAN participants to the PROFIBUS-DP.
The DP/CAN coupler Layer 2 must be parameterized in the hardware configurator as a PROFIBUS participant. Corresponding GSD files are included with the device.
The PROFIBUS side is configured as a DP slave
- Up to 1 Mbps CAN transfer rate
- Up to 12 Mbps PROFIBUS-DP
- Address setting using DIP switches
- Easy configuration via GSD file
- No handling blocks or parameterization software necessary
- 3 status LEDs
- Extended ambient temperature
- USB port for firmware updates
- Any protocols via Layer 2 possible
- CAN 2.0A (11 bit)
- CAN 2.0B (29 bit)
- Timer for cyclical frames
DP/CAN Coupler, Layer 2
General information
- Order number700-651-CAN01
- Article nameDP/CAN coupler Layer 2
- Scope of deliveryDP/CAN coupler, manual, CD with software
- Dimensions (DxWxH)114 x 18 x 108 mm
- WeightApprox. 110 g
- Status indicator3 LEDs
- Voltage supply24 V DC, 18–30 V DC
- Current drawtyp. 180 mA with DC 24 V
PROFIBUS interface
- Number1
- ProtocolPROFIBUS-DP
- Transmission ratemax. 12 Mbps, autom. detection
- I/O image sizemax. 240 bytes of input / 240 bytes of output data
- ConnectionSUB-D female connector, 9-pin
CAN interface
- Number1
- TypeISO/DIN 11898-2 CAN High-speed physical layer
- Transmission rate10 kbps ... 1 Mbps
- ProtocolCAN 2.0A (11 bit) / CAN 2.0B (29 bit)
- ConnectionTerminal 3-pin
- FeaturesCyclical transmission of CAN frames
Ambient conditions
- Ambient temperature-25 °C ... +70°C
- Transport and storage temperature-40 °C … +75 °C
- Relative air humidity95 % r H without condensation
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
DP/CAN Coupler, Layer 2
| Name | Version | Size |
| EG Declaration of Confirmity | 04-2016 | 41 KB |
| DP/CAN Coupler Layer 2, Manual | 8 | 984 KB |
| Name | Version | Size |
| DP/CAN coupler, GSD file (L2 V2B 29 Bit from FW-version 1.51) | 4 KB | |
| DP/CAN coupler, GSD file (L2 V2H 11 Bit from FW-version 1.28) | 4 KB |
DP/CAN Coupler, Layer 2
On the PROFIBUS-DP, the DP/CAN coupler is a normal participant.
The I/O data of the CANopen participants is shown in the PROFIBUS in a transparent and freely configurable manner.
The DP/CAN coupler is integrated in the hardware configurator with a GSD file and can be completely configured there. Additional tools are not necessary.
The DP/CAN coupler Layer 2 allows you to connect any number of CAN participants to the PROFIBUS-DP.
The DP/CAN coupler Layer 2 must be parameterized in the hardware configurator as a PROFIBUS participant. Corresponding GSD files are included with the device.
The PROFIBUS side is configured as a DP slave
- Up to 1 Mbps CAN transfer rate
- Up to 12 Mbps PROFIBUS-DP
- Address setting using DIP switches
- Easy configuration via GSD file
- No handling blocks or parameterization software necessary
- 3 status LEDs
- Extended ambient temperature
- USB port for firmware updates
- Any protocols via Layer 2 possible
- CAN 2.0A (11 bit)
- CAN 2.0B (29 bit)
- Timer for cyclical frames
DP/CAN Coupler, Layer 2
General information
- Order number700-651-CAN01
- Article nameDP/CAN coupler Layer 2
- Scope of deliveryDP/CAN coupler, manual, CD with software
- Dimensions (DxWxH)114 x 18 x 108 mm
- WeightApprox. 110 g
- Status indicator3 LEDs
- Voltage supply24 V DC, 18–30 V DC
- Current drawtyp. 180 mA with DC 24 V
PROFIBUS interface
- Number1
- ProtocolPROFIBUS-DP
- Transmission ratemax. 12 Mbps, autom. detection
- I/O image sizemax. 240 bytes of input / 240 bytes of output data
- ConnectionSUB-D female connector, 9-pin
CAN interface
- Number1
- TypeISO/DIN 11898-2 CAN High-speed physical layer
- Transmission rate10 kbps ... 1 Mbps
- ProtocolCAN 2.0A (11 bit) / CAN 2.0B (29 bit)
- ConnectionTerminal 3-pin
- FeaturesCyclical transmission of CAN frames
Ambient conditions
- Ambient temperature-25 °C ... +70°C
- Transport and storage temperature-40 °C … +75 °C
- Relative air humidity95 % r H without condensation
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
DP/CAN Coupler, Layer 2
| Name | Version | Size |
| EG Declaration of Confirmity | 04-2016 | 41 KB |
| DP/CAN Coupler Layer 2, Manual | 8 | 984 KB |
| Name | Version | Size |
| DP/CAN coupler, GSD file (L2 V2B 29 Bit from FW-version 1.51) | 4 KB | |
| DP/CAN coupler, GSD file (L2 V2H 11 Bit from FW-version 1.28) | 4 KB |