FLEXtra® PROFIBUS profiPoint with PROFIBUS Connector
The FLEXtra® profiPoint is used primarily to supply the terminating resistor and is designed for mounting on a DIN rail.
€135.89
FLEXtra® PROFIBUS profiPoint with PROFIBUS Connector
It can be used in conjunction with a PROFIBUS connector as the active measurement point or as an active terminator. Power is supplied independent of the bus through a socket.
Through the use of an active terminating resistor, participants of the bus system can optionally be switched on and off without causing malfunctions.
An integrated LED allows the correct function of the profiPoint to be read. For connection to the PROFIBUS cable, a PROFIBUS connector is required.
This set contains the PROFIBUS connector, 90° diagnosis with PG interface with the proven screw terminal required for connection to the PROFIBUS cable.
- Power supply independent of the bus participants
- Device-independent bus termination due to a separate power supply
- Suitable for use as an active measurement point
- Supply of active PROFIBUS components (compact repeater, NETLink, PROFIBUS diagnostic connector)
- incl. PROFIBUS connector 90° screw terminal diagnosis with PG interface (700-972-7BB12)
FLEXtra® PROFIBUS profiPoint with PROFIBUS Connector
General information
- Order number700-972-1XA02
- Article nameFLEXtra® profiPoint set
- Scope of deliveryFLEXtra® profiPoint, instructions, 1x PROFIBUS connector, 90°, screw terminal, diagnostics, with PG
- Dimensions (DxWxH)35 x 32 x 72 mm
- WeightApprox. 85 g
- Segment connectionPROFIBUS connectors
- Voltage supply24 V DC, 18...30 V DC
- Output voltage per segmentDC 24 V/5 V DC
- Electrical isolation500 V
- Current drawMax. 400 mA
Ambient conditions
- Ambient temperature0 °C … +60 °C
- Transport and storage temperature-25 °C … +75 °C
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
FLEXtra® PROFIBUS profiPoint with PROFIBUS Connector
| Name | Version | Size |
| FLEXtra profiPoint, Leaflet | 08-2017 | 261 KB |
| EG Declaration of Confirmity | 11-2016 | 45 KB |
| Name | Version | Size |
| FLEXtra® profiPoint, STEP files | 1.579 KB |
FLEXtra® PROFIBUS profiPoint with PROFIBUS Connector
It can be used in conjunction with a PROFIBUS connector as the active measurement point or as an active terminator. Power is supplied independent of the bus through a socket.
Through the use of an active terminating resistor, participants of the bus system can optionally be switched on and off without causing malfunctions.
An integrated LED allows the correct function of the profiPoint to be read. For connection to the PROFIBUS cable, a PROFIBUS connector is required.
This set contains the PROFIBUS connector, 90° diagnosis with PG interface with the proven screw terminal required for connection to the PROFIBUS cable.
- Power supply independent of the bus participants
- Device-independent bus termination due to a separate power supply
- Suitable for use as an active measurement point
- Supply of active PROFIBUS components (compact repeater, NETLink, PROFIBUS diagnostic connector)
- incl. PROFIBUS connector 90° screw terminal diagnosis with PG interface (700-972-7BB12)
FLEXtra® PROFIBUS profiPoint with PROFIBUS Connector
General information
- Order number700-972-1XA02
- Article nameFLEXtra® profiPoint set
- Scope of deliveryFLEXtra® profiPoint, instructions, 1x PROFIBUS connector, 90°, screw terminal, diagnostics, with PG
- Dimensions (DxWxH)35 x 32 x 72 mm
- WeightApprox. 85 g
- Segment connectionPROFIBUS connectors
- Voltage supply24 V DC, 18...30 V DC
- Output voltage per segmentDC 24 V/5 V DC
- Electrical isolation500 V
- Current drawMax. 400 mA
Ambient conditions
- Ambient temperature0 °C … +60 °C
- Transport and storage temperature-25 °C … +75 °C
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
FLEXtra® PROFIBUS profiPoint with PROFIBUS Connector
| Name | Version | Size |
| FLEXtra profiPoint, Leaflet | 08-2017 | 261 KB |
| EG Declaration of Confirmity | 11-2016 | 45 KB |
| Name | Version | Size |
| FLEXtra® profiPoint, STEP files | 1.579 KB |