FLEXtra® PROFIBUS profiPoint
The FLEXtra® profiPoint is used primarily to supply the terminating resistor and is designed for mounting on a DIN rail.
€107.38
FLEXtra® PROFIBUS profiPoint
It can be used in conjunction with a PROFIBUS connector as the active measurement point or as an active terminator. Power is supplied independent of the bus through a socket.
Through the use of an active terminating resistor, participants of the bus system can optionally be switched on and off without causing malfunctions.
An integrated LED allows the correct function of the profiPoint to be read. For connection to the PROFIBUS cable, a PROFIBUS connector is required.
The FLEXtra® profiPoint is also available in a set with a PROFIBUS connector.
- Power supply independent of the bus participants
- Device-independent bus termination due to a separate power supply
- Suitable for use as an active measurement point
- Supply of active PROFIBUS components (compact repeater, NETLink, PROFIBUS diagnostic connector)
FLEXtra® PROFIBUS profiPoint
General information
- Order number700-972-1AA02
- Article nameFLEXtra® profiPoint
- Scope of deliveryFLEXtra® profiPoint, instructions
- Dimensions (DxWxH)35 x 32 x 72 mm
- WeightApprox. 85 g
- Segment connectionPROFIBUS connectors
- Voltage supply24 V DC, 18...30 V DC
- Output voltage per segmentDC 24 V/5 V DC
- Electrical isolation500 V
- Current drawMax. 400 mA
Ambient conditions
- Ambient temperature0 °C … +60 °C
- Transport and storage temperature-25 °C … +75 °C
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
FLEXtra® PROFIBUS profiPoint
| Name | Version | Size |
| FLEXtra profiPoint, Leaflet | 08-2017 | 261 KB |
| EG Declaration of Confirmity | 11-2016 | 45 KB |
| Name | Version | Size |
| FLEXtra® profiPoint, STEP files | 1.579 KB |
FLEXtra® PROFIBUS profiPoint
It can be used in conjunction with a PROFIBUS connector as the active measurement point or as an active terminator. Power is supplied independent of the bus through a socket.
Through the use of an active terminating resistor, participants of the bus system can optionally be switched on and off without causing malfunctions.
An integrated LED allows the correct function of the profiPoint to be read. For connection to the PROFIBUS cable, a PROFIBUS connector is required.
The FLEXtra® profiPoint is also available in a set with a PROFIBUS connector.
- Power supply independent of the bus participants
- Device-independent bus termination due to a separate power supply
- Suitable for use as an active measurement point
- Supply of active PROFIBUS components (compact repeater, NETLink, PROFIBUS diagnostic connector)
FLEXtra® PROFIBUS profiPoint
General information
- Order number700-972-1AA02
- Article nameFLEXtra® profiPoint
- Scope of deliveryFLEXtra® profiPoint, instructions
- Dimensions (DxWxH)35 x 32 x 72 mm
- WeightApprox. 85 g
- Segment connectionPROFIBUS connectors
- Voltage supply24 V DC, 18...30 V DC
- Output voltage per segmentDC 24 V/5 V DC
- Electrical isolation500 V
- Current drawMax. 400 mA
Ambient conditions
- Ambient temperature0 °C … +60 °C
- Transport and storage temperature-25 °C … +75 °C
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
FLEXtra® PROFIBUS profiPoint
| Name | Version | Size |
| FLEXtra profiPoint, Leaflet | 08-2017 | 261 KB |
| EG Declaration of Confirmity | 11-2016 | 45 KB |
| Name | Version | Size |
| FLEXtra® profiPoint, STEP files | 1.579 KB |