PROFINET/CAN-Gateway, SAE J1939
With the PN/CAN gateway an easy and uncomplicated connection of CAN devices to a PROFINET network is possible.
€581.00
PROFINET/CAN-Gateway, SAE J1939
The PN/CAN-Gateway SAE J1939 can be used as a complete SAE J1939 device or for the simulation and diagnosis of an SAE J1939 network. The data of the Parameter Groups (PGNs) can be exchanged directly in the I/O data area of the PLC.
The gateway is completely configured with the help of a GSDML via the PROFINET configuration and does not require any additional software. The source address (SA) is freely adjustable. Single and multi-package messages are freely available in direct communication and as requests. In addition, the device can be used as a passive participant for transparent reading of PGN messages of an SAE J1939 network.
The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnostics complete the performance features of the PN/CAN gateway.
- Complete SAE J1939 device
- Broadcast and TP Protocols
- Supports PDU1 format (dynamic DA) and PDU2 format (group extensions)
- Protocol Abort Reasons directly readable in the input area
- Parameterizable priority and EDP
- Parameterizable device name including the arbitrary address enable bit
- Dynamically definable SA/DA
- Automatic response to requests of the parameterized PGNs
- PGN requests for single and multi-reponses (e.g. diagnostics)
- Cyclic transmission and time-controlled reception of Single Package and Multi Package PGNs with parameterizable timing
- Event-triggered sending of PGNs
- Transparent SAE J1939 protocol access
- Up to 1420 bytes input and 1420 bytes output data on PROFINET
- PROFINET media redundancy (MRP client)
- Configuration via GSDML file
- No further configuration software or handling modules necessary
- USB device interface for online diagnosis and firmware update
PROFINET/CAN-Gateway, SAE J1939
General information
- Order number700-671-PNC01
- Article namePN/CAN gateway, CAN Layer 2
- Scope of deliveryPN/CAN-Gateway with power plug
- Dimensions (DxWxH)35 x 84 x 76 mm
- WeightApprox. 160 g
PROFINET interface (X1)
- Number1
- Connection2x RJ45, integrated switch
- ProtocolPROFINET IO as defined in IEC 61158-6-10
- Transmission rate100 Mbps
- I/O image sizemax. 1440 bytes of input / 1440 of output data
- FeaturesMedia redundancy (MRP),
- automatic addressing,
- topology detection (LLDP, DCP),
- diagnosis alarms
- PROFINET conformance class C
CAN interface
- Number1
- TypeISO/DIN 11898-2 CAN High Speed physical Layer
- ConnectionSUB-D connector 9 pin, male
- Transmission rate50, 100, 125, 250, 500, 800, 1000 Kbit/s
- ProtocolSAE J1939 Device und transparent
USB interface
- ProtocolFull-speed USB 2.0 device
- ConnectionMini-USB
- Electrical isolation1.5 kV
Status indicator
- Function status3LEDs bi-color
- Ethernet status4 LEDs
Power supply
- Operating supply24 V DC, 18–30 V DC
- Current drawMax. 150 mA with 24 V DC
- Power dissipation4 W
Ambient conditions
- Ambient temperature-20 °C ... +60°C
- Transport and storage temperature-20 °C … +80 °C
- Relative air humidity95 % r H without condensation
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
PROFINET/CAN-Gateway, SAE J1939
| Name | Version | Size |
| EG Declaration of Confirmity | 06-2019 | 78 KB |
| Name | Version | Size |
| Easy connection of fieldbus networks – with Helmholz PROFINET gateways | 10-2023 | 1 MB |
| Name | Version | Size |
| IPSet, OpenSource license terms | 25 KB |
| Name | Version | Size |
| IPSet | 1.04.016 | 23 MB |
| PN/CAN-Gateway PROFINET/SAE J1939, GSDML file | 13 KB | |
| PN/CAN-Gateway PROFINET/SAE J1939, Firmware History | V3.02 | 1 KB |
| Name | Version | Size |
| PN/CAN-Gateway, USB driver | 1.24 | 7 KB |
| Name | Version | Size |
| PN/CAN-Gateway, STEP files | 2 MB | |
| EPLAN Data Portal, Helmholz product macros |
PROFINET/CAN-Gateway, SAE J1939
The PN/CAN-Gateway SAE J1939 can be used as a complete SAE J1939 device or for the simulation and diagnosis of an SAE J1939 network. The data of the Parameter Groups (PGNs) can be exchanged directly in the I/O data area of the PLC.
The gateway is completely configured with the help of a GSDML via the PROFINET configuration and does not require any additional software. The source address (SA) is freely adjustable. Single and multi-package messages are freely available in direct communication and as requests. In addition, the device can be used as a passive participant for transparent reading of PGN messages of an SAE J1939 network.
The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnostics complete the performance features of the PN/CAN gateway.
- Complete SAE J1939 device
- Broadcast and TP Protocols
- Supports PDU1 format (dynamic DA) and PDU2 format (group extensions)
- Protocol Abort Reasons directly readable in the input area
- Parameterizable priority and EDP
- Parameterizable device name including the arbitrary address enable bit
- Dynamically definable SA/DA
- Automatic response to requests of the parameterized PGNs
- PGN requests for single and multi-reponses (e.g. diagnostics)
- Cyclic transmission and time-controlled reception of Single Package and Multi Package PGNs with parameterizable timing
- Event-triggered sending of PGNs
- Transparent SAE J1939 protocol access
- Up to 1420 bytes input and 1420 bytes output data on PROFINET
- PROFINET media redundancy (MRP client)
- Configuration via GSDML file
- No further configuration software or handling modules necessary
- USB device interface for online diagnosis and firmware update
PROFINET/CAN-Gateway, SAE J1939
General information
- Order number700-671-PNC01
- Article namePN/CAN gateway, CAN Layer 2
- Scope of deliveryPN/CAN-Gateway with power plug
- Dimensions (DxWxH)35 x 84 x 76 mm
- WeightApprox. 160 g
PROFINET interface (X1)
- Number1
- Connection2x RJ45, integrated switch
- ProtocolPROFINET IO as defined in IEC 61158-6-10
- Transmission rate100 Mbps
- I/O image sizemax. 1440 bytes of input / 1440 of output data
- FeaturesMedia redundancy (MRP),
- automatic addressing,
- topology detection (LLDP, DCP),
- diagnosis alarms
- PROFINET conformance class C
CAN interface
- Number1
- TypeISO/DIN 11898-2 CAN High Speed physical Layer
- ConnectionSUB-D connector 9 pin, male
- Transmission rate50, 100, 125, 250, 500, 800, 1000 Kbit/s
- ProtocolSAE J1939 Device und transparent
USB interface
- ProtocolFull-speed USB 2.0 device
- ConnectionMini-USB
- Electrical isolation1.5 kV
Status indicator
- Function status3LEDs bi-color
- Ethernet status4 LEDs
Power supply
- Operating supply24 V DC, 18–30 V DC
- Current drawMax. 150 mA with 24 V DC
- Power dissipation4 W
Ambient conditions
- Ambient temperature-20 °C ... +60°C
- Transport and storage temperature-20 °C … +80 °C
- Relative air humidity95 % r H without condensation
- Pollution degree2
- Protection ratingIP20
- ApprovalsCE
PROFINET/CAN-Gateway, SAE J1939
| Name | Version | Size |
| EG Declaration of Confirmity | 06-2019 | 78 KB |
| Name | Version | Size |
| Easy connection of fieldbus networks – with Helmholz PROFINET gateways | 10-2023 | 1 MB |
| Name | Version | Size |
| IPSet, OpenSource license terms | 25 KB |
| Name | Version | Size |
| IPSet | 1.04.016 | 23 MB |
| PN/CAN-Gateway PROFINET/SAE J1939, GSDML file | 13 KB | |
| PN/CAN-Gateway PROFINET/SAE J1939, Firmware History | V3.02 | 1 KB |
| Name | Version | Size |
| PN/CAN-Gateway, USB driver | 1.24 | 7 KB |
| Name | Version | Size |
| PN/CAN-Gateway, STEP files | 2 MB | |
| EPLAN Data Portal, Helmholz product macros |