PROFINET/CAN-Gateway SLIM, Layer 2
The PN/CAN gateway SLIM enables simple and straightforward connection of CAN devices to a PROFINET network. On the CAN side, various CAN protocol variants are supported.€581.00
PROFINET/CAN-Gateway SLIM, Layer 2
The PN/CAN gateway Layer 2 allows the connection of CAN devices with proprietary CAN protocols.
On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transmission rates of up to 100 Mbit full duplex; on the CAN bus, up to 1 Mbit/s is supported.
The I/O data of the CAN nodes are mapped transparently and freely configurable into the PROFINET network and can thus be processed directly in the PLC.
The PN/CAN gateway is integrated into the hardware configurator with a GSDML file and can be fully configured there. Further software tools for parameterization, or handling blocks for programming, are not necessary, which makes the use of the gateway uncomplicated.
The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnosis complete the performance characteristics of the PN/CAN gateway.
- Automatic and controlled receive and transmit objects for CAN frames with configurable identifier
- Transmission objects can also be transmitted cyclically
- Receive channel FIFO for receiving CAN frames with flexible identifier
- Transmission channel FIFO for transmitting any CAN frames with flexible identifier
- Up to 512 different CAN frames configurable
- Supports CAN 2.0A (11 bit identifier) and CAN 2.0B (29 bit identifier)
- Up to 1 Mbit/s CAN bit rate
- Simple configuration via GSDML file
- No PLC handling blocks or parameterization software necessary
- Media redundancy (MRP client)
- USB device interface for online diagnosis and firmware update
- small housing
PROFINET/CAN-Gateway SLIM, Layer 2
General Information
- Order-no.700-671-PNC51
- NamePROFINET/CAN-Gateway SLIM, Layer 2
- Scope of deliveryPROFINET/CAN-Gateway SLIM with power connector
- Diemnsions (D x W xH)65 x 25 x 109 mm
- WeightApprox. 160g
PROFINET-interface
- Number1
- Connection2x RJ45, integrated Switch
- Transmission rate100 MBpbs, full dupley
- ProtocolPROFINET IO Device as defined in IEC 61158-6-10
- I/O image sizemax. 1440 bytes inputdata / 1440 bytes outputdata
- FeaturesPROFINET Conformance Class C, Media redundancy (MRP client), Automatic addressing, Topology detection (LLDP, DCP), Diagnosis alarms
CAN-interface
- Number1
- TypeISO/DIN 11898-2 CAN High Speed physical Layer
- Connection9-pin D-sub male connector
- Baud rate10, 50, 100, 125, 250, 500, 800, 1000 kbps
- ProtocolCAN Layer 2 with 11-bit or 29-bit identifier
- FeaturesAutomatic and controlled receive and transmit objects
- Receive channel FIFO; Transmit channel FIFO
USB interface
- ProtocolUSB 2.0 Device, Full Speed
- ConnectionUSB-C
- Electrically isolation500 V
Status indicator
- Function status4 LEDs, bi-color
- Ethernet status4 LEDs
Power supply
- Operating voltage24 V DC, 18 - 30 V DC
- Current drawmax. 105mA at 24 V DC
- Power dissipationmax. 2,6 W
Ambient conditions
- Ambient temperature-40°C bis +75°C
- Transport and storage temperature-40°C bis +80°C
- Relative humidity95% without condensation
- Pollution degree2
- Protection ratingIP 20
- Mounting positionas desired
- ApprovalsCE
PROFINET/CAN-Gateway SLIM, Layer 2
PROFINET/CAN-Gateway SLIM, Layer 2
The PN/CAN gateway Layer 2 allows the connection of CAN devices with proprietary CAN protocols.
On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transmission rates of up to 100 Mbit full duplex; on the CAN bus, up to 1 Mbit/s is supported.
The I/O data of the CAN nodes are mapped transparently and freely configurable into the PROFINET network and can thus be processed directly in the PLC.
The PN/CAN gateway is integrated into the hardware configurator with a GSDML file and can be fully configured there. Further software tools for parameterization, or handling blocks for programming, are not necessary, which makes the use of the gateway uncomplicated.
The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnosis complete the performance characteristics of the PN/CAN gateway.
- Automatic and controlled receive and transmit objects for CAN frames with configurable identifier
- Transmission objects can also be transmitted cyclically
- Receive channel FIFO for receiving CAN frames with flexible identifier
- Transmission channel FIFO for transmitting any CAN frames with flexible identifier
- Up to 512 different CAN frames configurable
- Supports CAN 2.0A (11 bit identifier) and CAN 2.0B (29 bit identifier)
- Up to 1 Mbit/s CAN bit rate
- Simple configuration via GSDML file
- No PLC handling blocks or parameterization software necessary
- Media redundancy (MRP client)
- USB device interface for online diagnosis and firmware update
- small housing
PROFINET/CAN-Gateway SLIM, Layer 2
General Information
- Order-no.700-671-PNC51
- NamePROFINET/CAN-Gateway SLIM, Layer 2
- Scope of deliveryPROFINET/CAN-Gateway SLIM with power connector
- Diemnsions (D x W xH)65 x 25 x 109 mm
- WeightApprox. 160g
PROFINET-interface
- Number1
- Connection2x RJ45, integrated Switch
- Transmission rate100 MBpbs, full dupley
- ProtocolPROFINET IO Device as defined in IEC 61158-6-10
- I/O image sizemax. 1440 bytes inputdata / 1440 bytes outputdata
- FeaturesPROFINET Conformance Class C, Media redundancy (MRP client), Automatic addressing, Topology detection (LLDP, DCP), Diagnosis alarms
CAN-interface
- Number1
- TypeISO/DIN 11898-2 CAN High Speed physical Layer
- Connection9-pin D-sub male connector
- Baud rate10, 50, 100, 125, 250, 500, 800, 1000 kbps
- ProtocolCAN Layer 2 with 11-bit or 29-bit identifier
- FeaturesAutomatic and controlled receive and transmit objects
- Receive channel FIFO; Transmit channel FIFO
USB interface
- ProtocolUSB 2.0 Device, Full Speed
- ConnectionUSB-C
- Electrically isolation500 V
Status indicator
- Function status4 LEDs, bi-color
- Ethernet status4 LEDs
Power supply
- Operating voltage24 V DC, 18 - 30 V DC
- Current drawmax. 105mA at 24 V DC
- Power dissipationmax. 2,6 W
Ambient conditions
- Ambient temperature-40°C bis +75°C
- Transport and storage temperature-40°C bis +80°C
- Relative humidity95% without condensation
- Pollution degree2
- Protection ratingIP 20
- Mounting positionas desired
- ApprovalsCE
PROFINET/CAN-Gateway SLIM, Layer 2