PROFINET/CAN-Gateway SLIM, SAE J1939
The PN/CAN gateway SLIM enables simple and straightforward connection of CAN devices to a PROFINET network. On the CAN side, various CAN protocol variants are supported.€581.00
PROFINET/CAN-Gateway SLIM, SAE J1939
The PN/CAN-Gateway SAE J1939 can be used as a complete SAE J1939 device or for the simulation and diagnosis of an SAE J1939 network. The data of the Parameter Groups (PGNs) can be exchanged directly in the I/O data area of the PLC.
The gateway is completely configured with the help of a GSDML via the PROFINET configuration and does not require any additional software. The source address (SA) is freely adjustable. Single and multi-package messages are freely available in direct communication and as requests. In addition, the device can be used as a passive participant for transparent reading of PGN messages of an SAE J1939 network.
The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnostics complete the performance features of the PN/CAN gateway.
- Complete SAE J1939 device
- Broadcast and TP Protocols
- Supports PDU1 format (dynamic DA) and PDU2 format (group extensions)
- Protocol Abort Reasons directly readable in the input area
- Parameterizable priority and EDP
- Parameterizable device name including the arbitrary address enable bit
- Dynamically definable SA/DA
- Automatic response to requests of the parameterized PGNs
- PGN requests for single and multi-reponses (e.g. diagnostics)
- Cyclic transmission and time-controlled reception of Single Package and Multi Package PGNs with parameterizable timing
- Event-triggered sending of PGNs
- Transparent SAE J1939 protocol access
- Up to 1420 bytes input and 1420 bytes output data on PROFINET
- PROFINET media redundancy (MRP client)
- Configuration via GSDML file
- No further configuration software or handling modules necessary
- USB device interface for online diagnosis and firmware update
- small housing
PROFINET/CAN-Gateway SLIM, SAE J1939
General Information
- Order-no.700-673-PNC51
- NamePROFINET/CAN-Gateway SLIM, SAE J1939
- Scope of deliveryPROFINET/CAN-Gateway SLIM with Power Plug
- Diemnsions (D x W xH)65 x 25 x 109 mm
- WeightApprox. 160g
PROFINET-interface
- Number1
- Connection2x RJ45, integrated Switch
- Transmission rate100 MBpbs, full dupley
- ProtocolPROFINET IO Device as defined in IEC 61158-6-10
- I/O image sizemax. 1440 bytes inputdata / 1440 bytes outputdata
- FeaturesPROFINET Conformance Class C, Media redundancy (MRP client), Automatic addressing, Topology detection (LLDP, DCP), Diagnosis alarms
CAN-interface
- Number1
- TypeISO/DIN 11898-2 CAN High Speed physical Layer
- Connection9-pin D-sub male connector
- Baud rate10, 50, 100, 125, 250, 500, 800, 1000 kbps
- ProtocolSAE J1939 Device und transparent
USB interface
- ProtocolUSB 2.0 Device, Full Speed
- ConnectionUSB-C
- Electrically isolation500 V
Status indicator
- Function status4 LEDs, bi-color
- Ethernet status4 LEDs
Power supply
- Operating voltage24 V DC, 18 - 30 V DC
- Current drawmax. 105mA at 24 V DC
- Power dissipationmax. 2,6 W
Ambient conditions
- Ambient temperature-40°C bis +75°C
- Transport and storage temperature-40°C bis +80°C
- Relative humidity95% without condensation
- Pollution degree2
- Protection ratingIP 20
- Mounting positionas desired
- ApprovalsCE
PROFINET/CAN-Gateway SLIM, SAE J1939
PROFINET/CAN-Gateway SLIM, SAE J1939
The PN/CAN-Gateway SAE J1939 can be used as a complete SAE J1939 device or for the simulation and diagnosis of an SAE J1939 network. The data of the Parameter Groups (PGNs) can be exchanged directly in the I/O data area of the PLC.
The gateway is completely configured with the help of a GSDML via the PROFINET configuration and does not require any additional software. The source address (SA) is freely adjustable. Single and multi-package messages are freely available in direct communication and as requests. In addition, the device can be used as a passive participant for transparent reading of PGN messages of an SAE J1939 network.
The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnostics complete the performance features of the PN/CAN gateway.
- Complete SAE J1939 device
- Broadcast and TP Protocols
- Supports PDU1 format (dynamic DA) and PDU2 format (group extensions)
- Protocol Abort Reasons directly readable in the input area
- Parameterizable priority and EDP
- Parameterizable device name including the arbitrary address enable bit
- Dynamically definable SA/DA
- Automatic response to requests of the parameterized PGNs
- PGN requests for single and multi-reponses (e.g. diagnostics)
- Cyclic transmission and time-controlled reception of Single Package and Multi Package PGNs with parameterizable timing
- Event-triggered sending of PGNs
- Transparent SAE J1939 protocol access
- Up to 1420 bytes input and 1420 bytes output data on PROFINET
- PROFINET media redundancy (MRP client)
- Configuration via GSDML file
- No further configuration software or handling modules necessary
- USB device interface for online diagnosis and firmware update
- small housing
PROFINET/CAN-Gateway SLIM, SAE J1939
General Information
- Order-no.700-673-PNC51
- NamePROFINET/CAN-Gateway SLIM, SAE J1939
- Scope of deliveryPROFINET/CAN-Gateway SLIM with Power Plug
- Diemnsions (D x W xH)65 x 25 x 109 mm
- WeightApprox. 160g
PROFINET-interface
- Number1
- Connection2x RJ45, integrated Switch
- Transmission rate100 MBpbs, full dupley
- ProtocolPROFINET IO Device as defined in IEC 61158-6-10
- I/O image sizemax. 1440 bytes inputdata / 1440 bytes outputdata
- FeaturesPROFINET Conformance Class C, Media redundancy (MRP client), Automatic addressing, Topology detection (LLDP, DCP), Diagnosis alarms
CAN-interface
- Number1
- TypeISO/DIN 11898-2 CAN High Speed physical Layer
- Connection9-pin D-sub male connector
- Baud rate10, 50, 100, 125, 250, 500, 800, 1000 kbps
- ProtocolSAE J1939 Device und transparent
USB interface
- ProtocolUSB 2.0 Device, Full Speed
- ConnectionUSB-C
- Electrically isolation500 V
Status indicator
- Function status4 LEDs, bi-color
- Ethernet status4 LEDs
Power supply
- Operating voltage24 V DC, 18 - 30 V DC
- Current drawmax. 105mA at 24 V DC
- Power dissipationmax. 2,6 W
Ambient conditions
- Ambient temperature-40°C bis +75°C
- Transport and storage temperature-40°C bis +80°C
- Relative humidity95% without condensation
- Pollution degree2
- Protection ratingIP 20
- Mounting positionas desired
- ApprovalsCE
PROFINET/CAN-Gateway SLIM, SAE J1939