Skip to main content Skip to search Skip to main navigation

FLEXtra FLAT Ethernet-Switch, unmanaged 8x RJ45 100 Mbit

The Helmholz unmanaged Ethernet switches are suitable for a variety of industrial applications because of their very compact design. The lightweight and tough industrial design is suitable for mounting on a DIN rail and can be easily integrated into your network. Once plugged in, it's ready for use thanks to the simple Plug & Play solution. The tool-free push-in connection for the power supply supports you.

The unmanaged Ethernet switch is suitable for PROFINET networks. The LLPD (neighborhood detection) and PTCP (time synchronization) functions are handled correctly with the switch in accordance with the PROFINET standard. The unmanaged Ethernet switch thus complies with PROFINET Conformance Class A.

With this variant of the unmanaged Ethernet-Switch, you can connect up to 8 Ethernet participants with 10 or 100 Mbps. If you would like to connect more participants, we recommend our 16-port unmanaged Ethernet Switch.

  • Store-and-Forward architecture
  • 10Base-T/100Base-TX
  • Full-/Half-Duplex
  • Autonegotiation
  • Auto MDI/MDI-X (IEEE 802.3u Auto crossover support)
  • LLDP & PTCP Delay-Traffic blocking (for PROFINET networks)
  • PROFINET Conformance Class A
  • QoS-Priority Queues: 2 per port
  • 1K MAC address lookup table
  • 448K bits packet buffer memory
  • Max. forwarding packet length 1552 bytes

FLEXtra FLAT Ethernet-Switch, unmanaged 8x RJ45 100 Mbit

General information

  • Order number700-840-8ES01
  • Article nameFLEXtra FLAT Ethernet-Switch, unmanaged, 8-Port, 100 Mbit
  • Scope of deliveryEthernet 8-port switch with power supply plug, short manual
  • Dimensions (DxWxH)32.5 x 64 x 80.5 mm
  • WeightApprox. 150g

LAN interface

  • Number8
  • ConnectionRJ45
  • Transmission rate10/100 Mbps
  • Type10Base-T/100Base-TX
  • Full-/Half-Duplex (Autonegotiation)
  • Auto MDI/MDI-X
  • IEEE Autocrossover
  • PROFINET Conformance Class A

Status indicator

  • Power display1 LED
  • Ethernet-Status16 LEDs

Power supply

  • Voltage supply24 V DC (18...30 V DC)
  • Current drawmax. 100 mA at 24 V DC
  • Power dissipation2,4 W

Ambient conditions

  • Ambient temperature-25 °C … +75 °C
  • Transport and storage temperature-40 °C … +85 °C
  • Relative air humidity95 % r H without condensation
  • Protection ratingIP20
  • Mounting positionas desired
  • ApprovalsCE, UL

UL

  • ULUL 61010-1/ UL 61010-2-201
  • Pollution degree2
  • Voltage supplyDC 24 V (18 ... 30 VDC, SELV and limited energy circuit)
  • AltitudeUp to 2000 m
  • Temperature cable rating87 °C

FLEXtra FLAT Ethernet-Switch, unmanaged 8x RJ45 100 Mbit

The Helmholz unmanaged Ethernet switches are suitable for a variety of industrial applications because of their very compact design. The lightweight and tough industrial design is suitable for mounting on a DIN rail and can be easily integrated into your network. Once plugged in, it's ready for use thanks to the simple Plug & Play solution. The tool-free push-in connection for the power supply supports you.

The unmanaged Ethernet switch is suitable for PROFINET networks. The LLPD (neighborhood detection) and PTCP (time synchronization) functions are handled correctly with the switch in accordance with the PROFINET standard. The unmanaged Ethernet switch thus complies with PROFINET Conformance Class A.

With this variant of the unmanaged Ethernet-Switch, you can connect up to 8 Ethernet participants with 10 or 100 Mbps. If you would like to connect more participants, we recommend our 16-port unmanaged Ethernet Switch.

  • Store-and-Forward architecture
  • 10Base-T/100Base-TX
  • Full-/Half-Duplex
  • Autonegotiation
  • Auto MDI/MDI-X (IEEE 802.3u Auto crossover support)
  • LLDP & PTCP Delay-Traffic blocking (for PROFINET networks)
  • PROFINET Conformance Class A
  • QoS-Priority Queues: 2 per port
  • 1K MAC address lookup table
  • 448K bits packet buffer memory
  • Max. forwarding packet length 1552 bytes

FLEXtra FLAT Ethernet-Switch, unmanaged 8x RJ45 100 Mbit

General information

  • Order number700-840-8ES01
  • Article nameFLEXtra FLAT Ethernet-Switch, unmanaged, 8-Port, 100 Mbit
  • Scope of deliveryEthernet 8-port switch with power supply plug, short manual
  • Dimensions (DxWxH)32.5 x 64 x 80.5 mm
  • WeightApprox. 150g

LAN interface

  • Number8
  • ConnectionRJ45
  • Transmission rate10/100 Mbps
  • Type10Base-T/100Base-TX
  • Full-/Half-Duplex (Autonegotiation)
  • Auto MDI/MDI-X
  • IEEE Autocrossover
  • PROFINET Conformance Class A

Status indicator

  • Power display1 LED
  • Ethernet-Status16 LEDs

Power supply

  • Voltage supply24 V DC (18...30 V DC)
  • Current drawmax. 100 mA at 24 V DC
  • Power dissipation2,4 W

Ambient conditions

  • Ambient temperature-25 °C … +75 °C
  • Transport and storage temperature-40 °C … +85 °C
  • Relative air humidity95 % r H without condensation
  • Protection ratingIP20
  • Mounting positionas desired
  • ApprovalsCE, UL

UL

  • ULUL 61010-1/ UL 61010-2-201
  • Pollution degree2
  • Voltage supplyDC 24 V (18 ... 30 VDC, SELV and limited energy circuit)
  • AltitudeUp to 2000 m
  • Temperature cable rating87 °C
Skip product gallery

Similar Items

FLEXtra SLIM Ethernet-Switch, unmanaged
FLEXtra SLIM Ethernet-Switch, unmanaged
Select Number of ports
Select Transmission Rate

Regular price: From €94.33
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Details