FLEXtra IP67 Ethernet-Switch, unmanaged 100 Mbit
Thanks to its high IP67 protection class and temperature range from -40 °C to +75 °C, the FLEXtra IP67 unmanaged Ethernet-Switch is ideal for use in rough industrial environments.
€288.29
FLEXtra IP67 Ethernet-Switch, unmanaged 100 Mbit
The Helmholz unmanaged Ethernet-Switch IP67 is a very compact switch for a wide range of industrial applications.
The product is ideally suited for installation without a control cabinet and therefore offers a wide range of applications. Once plugged in, the simple Plug & Play solution makes it immediately ready for use.
The unmanaged Ethernet switch is suitable for PROFINET networks. The LLPD (neighborhood detection) and PTCP (time synchronization) functions are handled correctly with the switch in accordance with the PROFINET standard. The unmanaged Ethernet switch thus corresponds to PROFINET Conformance Class A.
With this variant of the unmanaged Ethernet switch you can connect up to 8 Ethernet subscribers with 10 or 100 Mbps.
- Store-and-Forward architecture
- 10/100Base-T/TX, Full-/Half-Duplex (Autonegotiation)
- HP Auto MDI/MDI-X & IEEE 802.3u Auto crossover support
- CoS according to IEEE 802.1Q
- Qos-Priority-Queues: 8
- LLDP & PTCP Delay-Traffic blocking (for PROFINET networks)
- PROFINET Conformance Class A
- 16K MAC address lookup table
- 256 KByte memory for frame buffering
- 51.2 Gbps high-performance memory bandwidth
- Unmanaged switch with 8 x 10/100 Mbps M12 ports
- Protection class IP67
- Switch cabinet-less mounting possible
FLEXtra IP67 Ethernet-Switch, unmanaged 100 Mbit
General information
- Order number700-847-8ES01
- Article nameFLEXtra IP67 Ethernet-Switch, unmanaged, 8x M12, 100 Mbit
- Scope of deliveryEthernet-Switch 8-port, Brief Instruction, Protection caps
- Dimensions (DxWxH)24 x 62 x 190 mm
- Weightapprox. 410 g
LAN interface (X1)
- Number8
- ConnectionM12 D-Coded
- Transmission rate10/100 Mbps
- Type10BASE-T,100BASE-TX,
- Full-/Half-Duplex,
- Auto negotiation,
- Auto MDI/MDI-X
- PROFINET Conformance Class A
Status indicator
- Power1 LED
- Ethernet-status16 LEDs
Power supply (X2)
- Operating voltageDC 24 V (18...30 V DC)
- ConnectionM12 L-Coded
- Current drawmax. 75 mA with 24 V DC
- Power dissipationmax. 1,8 W
Ambient conditions
- Ambient temperature-40 °C … +75 °C
- Transport and storage temperature-40 °C … +85 °C
- Relative air humidity95 % r. H. without condensation
- Protection ratingIP67
- Mounting positionas desired
- ApprovalsCE
FLEXtra IP67 Ethernet-Switch, unmanaged 100 Mbit
| Name | Version | Size | |
| Manual 700-847-8ES01 | V5 | 153 KB | Download |
| Name | Version | ||
| EU Declaration of conformity | 11-2021 | Download | |
| PROFINET Conformance Class A manufacturer declaration | 5-2023 | Download |
| Name | Version | Size | |
| Umanaged IP67 Switch STEP-file | 7-2021 | 11,4 MB | Download |
| EPLAN Data Portal, Helmholz product macros | Download |
| Name | Version | Size | |
| Innovatively networking automation – PROFINET and Ethernet-Switches | 3-2026 | 2 MB | Download |
FLEXtra IP67 Ethernet-Switch, unmanaged 100 Mbit
The Helmholz unmanaged Ethernet-Switch IP67 is a very compact switch for a wide range of industrial applications.
The product is ideally suited for installation without a control cabinet and therefore offers a wide range of applications. Once plugged in, the simple Plug & Play solution makes it immediately ready for use.
The unmanaged Ethernet switch is suitable for PROFINET networks. The LLPD (neighborhood detection) and PTCP (time synchronization) functions are handled correctly with the switch in accordance with the PROFINET standard. The unmanaged Ethernet switch thus corresponds to PROFINET Conformance Class A.
With this variant of the unmanaged Ethernet switch you can connect up to 8 Ethernet subscribers with 10 or 100 Mbps.
- Store-and-Forward architecture
- 10/100Base-T/TX, Full-/Half-Duplex (Autonegotiation)
- HP Auto MDI/MDI-X & IEEE 802.3u Auto crossover support
- CoS according to IEEE 802.1Q
- Qos-Priority-Queues: 8
- LLDP & PTCP Delay-Traffic blocking (for PROFINET networks)
- PROFINET Conformance Class A
- 16K MAC address lookup table
- 256 KByte memory for frame buffering
- 51.2 Gbps high-performance memory bandwidth
- Unmanaged switch with 8 x 10/100 Mbps M12 ports
- Protection class IP67
- Switch cabinet-less mounting possible
FLEXtra IP67 Ethernet-Switch, unmanaged 100 Mbit
General information
- Order number700-847-8ES01
- Article nameFLEXtra IP67 Ethernet-Switch, unmanaged, 8x M12, 100 Mbit
- Scope of deliveryEthernet-Switch 8-port, Brief Instruction, Protection caps
- Dimensions (DxWxH)24 x 62 x 190 mm
- Weightapprox. 410 g
LAN interface (X1)
- Number8
- ConnectionM12 D-Coded
- Transmission rate10/100 Mbps
- Type10BASE-T,100BASE-TX,
- Full-/Half-Duplex,
- Auto negotiation,
- Auto MDI/MDI-X
- PROFINET Conformance Class A
Status indicator
- Power1 LED
- Ethernet-status16 LEDs
Power supply (X2)
- Operating voltageDC 24 V (18...30 V DC)
- ConnectionM12 L-Coded
- Current drawmax. 75 mA with 24 V DC
- Power dissipationmax. 1,8 W
Ambient conditions
- Ambient temperature-40 °C … +75 °C
- Transport and storage temperature-40 °C … +85 °C
- Relative air humidity95 % r. H. without condensation
- Protection ratingIP67
- Mounting positionas desired
- ApprovalsCE
FLEXtra IP67 Ethernet-Switch, unmanaged 100 Mbit
| Name | Version | Size | |
| Manual 700-847-8ES01 | V5 | 153 KB | Download |
| Name | Version | ||
| EU Declaration of conformity | 11-2021 | Download | |
| PROFINET Conformance Class A manufacturer declaration | 5-2023 | Download |
| Name | Version | Size | |
| Umanaged IP67 Switch STEP-file | 7-2021 | 11,4 MB | Download |
| EPLAN Data Portal, Helmholz product macros | Download |
| Name | Version | Size | |
| Innovatively networking automation – PROFINET and Ethernet-Switches | 3-2026 | 2 MB | Download |